Quote:
Originally Posted by DFB FGXR6
Bead Maker is polymer sealant with a very small amount of Si02 in it. As such, its pretty weak, so I would count on higher alkaline soaps like Gyeon Q2M Foam, NV Snow+ and Carpro Lift will giving it a hard time.
Jet and Boost are far stronger than Bead Maker, so they would hold up better.
It's important to note that both Lift and Q2M Foam are designed to be a foam-and-rinse proposition, which does curtail some of that alkalinity. Start to agitate, as in a contact wash with a mitt, and you will certainly notice a reduction in hydrophobics on spray sealants and waxes. It won't totally remove them in one go but will speed up the degradation.
All of that is not to dissuade you from using those soaps, in fact they can actually help revive a ceramic coating or a product like Jet. Depending on usage, you could use these soaps every few months, or when you are dealing with an excessively dirty car.
|
I see, considering how I always use Bead Maker, Jet, Boost etc after every wash it doesn't really matter.