Genuine Ford Parts

[GTLEGEND]

Originally Posted by aussiblue

Oops sorry.

All good, I see your intentions are there lol, glad we all try to help each other!!

[aussiblue]

Yes; it's where I bought my last headlight for my MKII FG XR6 after someone killed it in a carpark (I suspect vandalism but perhaps it was a towbar) so I naturally thought.....

[Chris fgx ute 2015]

Hi all, looking for a genuine FGX Ute reverse camera and any instructions on install. I have a secondhand ICC unit which is camera ready and SAT NAV which I currently don't have.
any help would be appreciated.

[fgpsi]

Hi GTLEGEND ,

Can you get part number BAFF06004A1 Glove Box latch

Cheers

[GTLEGEND]

Originally Posted by Chris fgx ute 2015

Hi all, looking for a genuine FGX Ute reverse camera and any instructions on install. I have a secondhand ICC unit which is camera ready and SAT NAV which I currently don't have.
any help would be appreciated.

I am pretty sure utes never came with reverse camera in ICC only the accessory camera in the rear view mirror, but would need to double check.

[GTLEGEND]

Originally Posted by fgpsi

Hi GTLEGEND ,

Can you get part number BAFF06004A1 Glove Box latch

Cheers

Hi mate,

Yes $100 plus postage.

Cheers,
GT

[baboon]

Hi GTLEGEND,

Im looking for the part number for the boot hinge from a BA XR6.

The bolt has rusted off and need to find a replacement.

Thanks.

[GTLEGEND]

Originally Posted by baboon

Hi GTLEGEND,

Im looking for the part number for the boot hinge from a BA XR6.

The bolt has rusted off and need to find a replacement.

Thanks.

Morning mate,

RH: BAF42700A

LH: BAF42701A

Cheers,
GT

[baboon]

Originally Posted by GTLEGEND

Morning mate,

RH: BAF42700A

LH: BAF42701A

Cheers,
GT

Thank you very much!

[GTLEGEND]

Ford Salad351

FGX Deflector.png

[bondy99]

Greetings GTLEGEND,

Would you know if the combination headlight, parlklight switch for the Ford AU2 year 2000 6 cylinder still available.

For some bizarre reason I turned the switch fully reverse. Now the switch will not switch on or off unless I take the knob off and turn the dial with fingers.

[GTLEGEND]

Originally Posted by bondy99

Greetings GTLEGEND,

Would you know if the combination headlight, parlklight switch for the Ford AU2 year 2000 6 cylinder still available.

For some bizarre reason I turned the switch fully reverse. Now the switch will not switch on or off unless I take the knob off and turn the dial with fingers.

Hey Bondy,

Dark Graphite or Warm Charcoal colour?

I doubt it but let me know which one and Ill check it out.

GT

[bondy99]

GT
Hmm,. not sure but could be Dark Graphite.

Thanks

[PHANTMXR6]

G'day GT.

Chasing P&A for a turbo to dump pipe gasket for an FG turbo.

Posted to 0830 please.

Thanks.

[GTLEGEND]

Originally Posted by PHANTMXR6

G'day GT.

Chasing P&A for a turbo to dump pipe gasket for an FG turbo.

Posted to 0830 please.

Thanks.

Hi mate,

Dump pipe to turbo top gasket is $30, tracked freight is $10.95 via Australia Post, the lower one to sump is also $30 if need be.

Cheers,
GT

[Citroënbender]

Hello mate,

It looks like the plastic junction’s bottom spigot has snapped on this SY I AWD Territory.

What’s available, please? This is for the workshop in Hornsby.

[GTLEGEND]

Originally Posted by Citroënbender

Hello mate,

It looks like the plastic junction’s bottom spigot has snapped on this SY I AWD Territory.

What’s available, please? This is for the workshop in Hornsby.

image

What month and year as they change that hose 19/10/2006?

[Citroënbender]

I’ll get the VIN to you by tomorrow morning, have gone home for the day (rare earlymark).

[GTLEGEND]

Originally Posted by Citroënbender

I’ll get the VIN to you by tomorrow morning, have gone home for the day (rare earlymark).

Just confirming this is the hose in question..

SX SY Heater Hoses.png

SX SY Heater Hoses 2.png

[Citroënbender]

It really looks like 18495 in the first image.

That’s the earlier setup?

[Citroënbender]

Apparently the hoses 7890A and 7890B are not great either.

[GTLEGEND]

Originally Posted by Citroënbender

It really looks like 18495 in the first image.

That’s the earlier setup?

Thats the valve itself, no later from 10/05 set up.

[mad2]

Originally Posted by Citroënbender

Apparently the hoses 7890A and 7890B are not great either.

none of my business .. [so you can tell me to...] but .. would it not be betterer to chat with the customer re replacing the whole unit & fitting an air cooler?. i'm presuming the assembly is no longer available new?. had to replace the one in her original BF ..... some how the 2nd BF is fine?. the unit on my BF had been replaced before i bought it and hard lines fitted [BA manifold & gearbox].

[GTLEGEND]

Originally Posted by Citroënbender

Apparently the hoses 7890A and 7890B are not great either.

From what I can see only 7890A post 10/2006 is the only one still available, the rest are obsolete (well genuine anyway).

[Citroënbender]

The VIN is:

6FPAAAJGAT6J79755

If that helps narrow down the possibilities.

[GTLEGEND]

Originally Posted by Citroënbender

The VIN is:

6FPAAAJGAT6J79755

If that helps narrow down the possibilities.

Valve and hoses for that VIN are obsolete unfortuantely and no dealer stock either.

[Citroënbender]

Thank you for following it up. We’ll have to find a butcher’s solution. :-o