Exhaust setup on AU XR8

[redauxr8]

Hi Guys,

Im hoping to get my new exhaust soon.... Just wandering if anyone knows how hard it will be to set up a quad system like the BA's... Obviously its gonna be a twin 2 1/2 with double tips....

Has anyone done this to there AU before?

Any ideas? Opinions?

Cheers

[Peuty]

Can't do it. The fuel tank is in the way.

If it's a ute, then it's another story.

[CRAIGAU3220]

Originally Posted by Peuty

Can't do it. The fuel tank is in the way.

If it's a ute, then it's another story.

Shift the fuel tank.

Ive seen the set up that john was talking about.

[dreadly]

Like peuty said, only utes and even then it's pretty tricky hey

[UU TS50]

i have seen it on a S3 with the rebel bumper and it was run inside the bumper across to the other side of the car .
It was wrapped in exhaust wrap and it looked great but i dont know if it matters about the extra length in pipes from 1 side to the other?
Im pretty sure that it was done by APC in Wangara

[xygt01]

Originally Posted by Congo XR8

i have seen it on a S3 with the rebel bumper and it was run inside the bumper across to the other side of the car .
It was wrapped in exhaust wrap and it looked great but i dont know if it matters about the extra length in pipes from 1 side to the other?
Im pretty sure that it was done by APC in Wangara

there is no problems doing a twin system like this and then putting twin tips on to look like a quad and the extra length in pipes from 1 side to the other is not a problem as long as they put a balance pip in the system some where after the cats as that equalizes preasure on both sides to account for the extra lengths i have seen many cars done with twins like that down my area and the sound good

[redauxr8]

What about the CAT's Terminator? That has a massive twin 4 inch coming out from both sides? Thats on a T1 TE50... Shouldnt be much difference to my car right? Hes got a different engine yeh but the IRS Diff and all is the same id assume?

[bodes-sh]

Originally Posted by redauxr8

What about the CAT's Terminator? That has a massive twin 4 inch coming out from both sides? Thats on a T1 TE50... Shouldnt be much difference to my car right? Hes got a different engine yeh but the IRS Diff and all is the same id assume?

haha, yeah, but if you look at the pics of his fuel tank setup you will see why. it's in the space where the spare wheel used to go pretty much. the whole rear end has been modified

[MADED-6]

nah but his fuel tank is different which is the reason u cant go out both sides.
cheers josh.

[redauxr8]

Thanks guys

[bodes-sh]

on the other hand if you had straight lpg and a tank behind the seat you could ditch the petrol tank and have a proper twin system. it's a pity the au's petrol tanks are designed the way they are and not like the ba ones that are under the rear seat....

[UU TS50]

Originally Posted by bodes-sh

on the other hand if you had straight lpg and a tank behind the seat you could ditch the petrol tank and have a proper twin system. it's a pity the au's petrol tanks are designed the way they are and not like the ba ones that are under the rear seat....

is it possible to fit a B series ful tank in an AU has anyone tried this?

[bodes-sh]

dunno. but i think the floor pans are too different. i vaguely recall someone looking into it, but i can't recall any of the details...

[redauxr8]

Also, should i get Di Filippo Headers or pacemakers? My plans are heads, cam, new intake manifold etc... Should i get 4-1s or tri-ys? Would 4-1s be a good mod regardless of charging or strokering? Or get tri-ys......

[xr8ute]

Originally Posted by redauxr8

Also, should i get Di Filippo Headers or pacemakers? My plans are heads, cam, new intake manifold etc... Should i get 4-1s or tri-ys? Would 4-1s be a good mod regardless of charging or strokering? Or get tri-ys......

The Di Filippo and Pacemaker 4-1s are quite different in size.

The Pacemakers are small-ish 1 5/8" primaries and 2 1/4-ish collectors. I haven't seen a set of Di Filippo's, but I believe they are 1 3/4" primaries and a larger collector...

I love the 4-1 Pacemakers in my 5L, but i've never tried the tri-ys. On a near standard 5L AU engine, I think the 1 1/2" primary tri-y Hurricane headers would be pretty good as well.

[D12]

Mate I had Tri Y Pacemakers and now run DiFillipos 4-1....to be honest lost a little down low but gain some up hi....depends on what you want!!!

Here is a clip of

Pacemakers:- http://www.youtube.com/watch?v=5LPAZyCPDBA

Difillipos:- http://www.youtube.com/watch?v=9IDqEuZutik

Difillipo's sound alot deeper...why i dont know!!!

Good luck mate!!!

[redauxr8]

How would the Di Filippos affect 1/4 mile or 0-100 time? Would they make up for the lost low down?

[D12]

I havent put it down the 1/4 but it feels about the same....just a slight change in note.....personal perference I think....4-1's look much better and atleast with Difillipos it leaves the option open for supercharging which is why I went to the larger style Difillipo model!!!

Cheers Rory

[RG]

The difillipo's have a 3" collector, they're what I have on mine.