Got my piping done :D

Sundeep · 01-06-2005, 10:59 PM

But it's not all on yet :P

The guy's gave it all to me pretty much in my hand, saying it all needed a good clean out and they'd run out of hose clamps so I'd have to go buy some myself. Doesn't really bother me, I payed $60 less than what I was quoted and also got a couple of other little odds and ends done :sm_headba

It's only 2", but it's very, very neat and well done. It looks and is a lot better than I expected, all I have to do now is get it all powdercoated when I can be bothered :yeees:

So yeah, now I have to go get some hose clamps and stuff tomorrow and then see how I go fitting it. I been wagging a few classes of late :S It's all for the best I guess lol.

Apparently they did AU_Steve's car yesterday, new piping and full new exhaust system? What did you get done Steve? :P

:

Annnyways, I'll get it all on tomorrow hopefully then get some piccys etc. I recommend the guys down there, although I don't know why they did it in 2", but their workmanship is very very good and they even filled up my brake fluid and everything lol

:

Oh and noone go to Ace Exhausts in Croydon. Those guys are dumb ****s. I checked out my exhaust today and it looks like Doug welded it up :hihi: It's going to cost me $500 to get it fixed up, which is like $50 over what I paid for the whole lot. I've already had the tip moved coz it melted my bar.

Sundeep

Aaron_EF8 · 02-06-2005, 12:15 AM

Doing it in 2" will give less lag, as the compressor outlet is 2" i'm guessing?

Get some pics up!!

EFFalcon · 02-06-2005, 12:56 AM

Yeah, they'd have made it 2" due to the exit on the turbo being 2"
i guess it'd look weird going from 2" to 3" @ the cooler ;)

Stevo · 02-06-2005, 08:48 AM

Sunny, sounds like ur making good progress. Whats the go with Ace exhaust? You should have taken it back and shoved it in thier face....

dansedgli · 02-06-2005, 08:57 AM

Hurry up and get it all on Sunny! I did tell you not to go to Ace you dumbass

Kenaz · 02-06-2005, 09:02 AM

Where are the pics mate? Sounds like it's coming along nicely. Hopefully ready for next Monday night :hihi:

Sundeep · 02-06-2005, 04:50 PM

It's all IN!!!! I wrote a post before but my computer f**ked up hard so yeah.

Ash I need to give you another run!! It goes hard! I've put the rising reg to 30PSI and have the injected TB on. It's got the 2 injectors that were with the turbo kit in there, I think they're just standard but the spraying bit is different to the standard EA ones so yeah.

Flutter? YES!!! And it's maddd!!!! Sounds like a VL! Just need some minor tuning along with probably better injectors in the TB and I'm sweet. I reckon (don't want to be too optimistic) that with this diff (390km) and engine (350km) combo it's only going to be good for a mid to high 14. I'll have to take it to the track but.

Oh and my rocker cover gasket (silicone or some shit, we didn't have a gasket so improvised) ****ed up hard at the back exhaust side, something caught fire down the side of the block, only small, but I didn't hesitate to crack out the extinguisher. So now my engine's covered in powdery shit!!! I need a rocker cover gasket.

Anyways, pics later!

Sundeep

Kenaz · 03-06-2005, 09:44 AM

Quote:

Originally Posted by Sundeep

Ash I need to give you another run!! It goes hard!

Just name the time and place :hihi:

Oh and it sounds sweet, great vid!

need psi · 02-06-2005, 04:54 PM

sounds good sunny. isnt the throttle body size 2.75" though. thats what i was told never really bothered to check. cant wait to see the pics.

Ehab

dansedgli · 02-06-2005, 04:56 PM

Sweet as!! MORE BOOST!

Qwikcorty · 02-06-2005, 05:04 PM

2 inch would have fitted in the chopped out rails easy as. post some pics

Sundeep · 02-06-2005, 05:03 PM

Nah I'm happy with where it's at Daniel :P

I'm glad you forced me in to getting it all done Dan! I remember the first night when we were playing with 1 injector, the hobbs switch and light taped to the windscreen, man that was crap but you still thought it had potential lol

:

Sundeep

dansedgli · 02-06-2005, 05:07 PM

What is it boosting to now? ARe you working tonight?

SWOOP · 02-06-2005, 05:09 PM

good stuff Sunny , hope your bringing it to the meet!

EASPRINT · 02-06-2005, 05:11 PM

It sounds fully sick!!....Go and hunt down those VL's..lol

LUXO_8 · 02-06-2005, 05:22 PM

awesome sunny....

dansedgli · 02-06-2005, 05:31 PM

That looks awesome!! I like the cooler look!

needfordspeed · 02-06-2005, 05:32 PM

Here are the pics guys:

And here is a vid of the flutter

http://users.tpg.com.au/gillau/vid.3gp
With this vid you'll need a .3gp player, I think it might work in real player though.

It goes way better with the cooler, the flutter is mad!

PS sorry about the shitty quality of the pics.

Damo · 02-06-2005, 05:48 PM

that sounds mad! yeah it works in real player needfordspeed!

Good shit Sunny. I shouldn't have gone to work today..

Oh well. Now don't break anything. :P

p.s I went to ford today about the clutch tool thingy but they were useless. :( I'll talk you about it later.

LUXO_8 · 02-06-2005, 05:49 PM

thats awesome...

top stuff

Racecraft · 02-06-2005, 06:12 PM

time for battery in the boot and an intake pod extension... Looking good mate, you should be proud you've done so much yourself.

EFFalcon · 02-06-2005, 09:19 PM

Don't look too bad

i guess u got ur wish with the hidden cooler!

interesting piping on the turbo outlet, coudnl't that have been done better?

Qwikcorty · 02-06-2005, 09:41 PM

the housing would have to be turned around so it faces down for something a bit more hidden, but i like it how it is now, looks good!

ilsautomotive · 02-06-2005, 09:45 PM

Sik stuff Sunny, you certainly don't waste time.

PULLY6 · 02-06-2005, 11:08 PM

F*K yeah, that looks and sounds brilliant sunny. You sure got it done fast!

Sundeep · 03-06-2005, 10:54 AM

Thanks for the comments guys ;) Always good to have some feedback after spending so much ****ing cash and cutting up your hands lol.

Quote:

Originally Posted by EFFalcon

interesting piping on the turbo outlet, coudnl't that have been done better?

As Matt said, they would have had to turn the compressor housing round 180 degrees, but the guy said it would make it a lot harder to run the piping for him. I don't really care, seems to work very well. The pics make it look a bit retarded. I'll give it all a good wash tmrw and put some more pics up.

All I have to do now is get those TPS's working, it's affecting it heaps, along with changing the rocker cover gasket and fixing the exhaust leaks. All that and a good tune, which I don't think is going to be too hard as it seems to be running pretty well.

I also want to get my rear wheels on in time for the next CCC cruise and E-series one. If you read this Galapogos can you PM me the details of that place you said machines hubs, and a rough price on it? Otherwise I'm putting EF/L axles in for their longer studs and using spacers. I know Karl put a EF 3.45LSD in his EB, but I don't know what he did about the brakes. Anyone have a spare EF diff I can scab the axles from

Sundeep

LUXO_8 · 03-06-2005, 03:24 PM

Quote:

Originally Posted by Sundeep

I know Karl put a EF 3.45LSD in his EB, but I don't know what he did about the brakes. Anyone have a spare EF diff I can scab the axles from

Sundeep

he's going to be helping put my EL XR diff in soonish, he said we'll use my current brakes.... he said they go on....

EFFalcon · 03-06-2005, 11:33 AM

Fair enough on the piping

how hard is it to turn the compressor housing aorund 180 degrees?
Certainly can't wait to see and hear it

with a tune you should be laughing

Qwikcorty · 03-06-2005, 02:13 PM

u just loosen 6 bolts on the back of it. ive had mine in a alot of positions trying to get the most clearance.

Sundeep · 03-06-2005, 02:14 PM

John, I don't know how hard it is and didn't really care to find out. The pipe would probably have hit the power steering lines and turbo oil drain back lines and would have had to come back up over the power steering pump due to it's shape.

Anyone remember this?;

Quote:

Originally Posted by Yagz

Nice. I'll look back in a year on this thread and see how far he's gotten

And this...

Quote:

Originally Posted by Sundeep

And Yagz, come back in six months faggot

Well that was 11/12/04, It's just over 6 months now ;)

Sundeep