|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
26-10-2007, 11:48 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Sep 2007
Posts: 717
|
My cigarette lighter isn't working which doesn't really effect me because i don't smoke, but i need to charge my phone while in the car and i was looking at the possibility of buying a gps. I haven't tried to use it until recently so I'm not sure how long it's been on the fritz.
what should i be looking at? Is there a specific fuse for the lighter (I doubt it) or does the whole thing have to be pulled out and replaced? Thanks. |
||
27-10-2007, 10:19 AM | #2 | ||
Sales Representative
Join Date: Mar 2007
Location: Young
Posts: 5,314
|
I'd grab a multimeter and test for power with the ignition on... then check all your fuses just incase. It could be as simple as just a wire fell off.
__________________
Project InfernoSR - Back Burner Project FeralTerra - No longer Project Fairmont Prodigy - Sold Thanks go to: MY WIFE! Bathurst Brakepro Undacar eBay!! |
||
27-10-2007, 10:32 AM | #3 | ||
formerly PURSUIT-250
Join Date: Jul 2005
Location: MELBOURNE
Posts: 1,228
|
Yeh check for power first at socket then all fuses, if still no go i would be removing the socket you will find on the back of it a looped wire ( fusable link ) 99% of the time that burns out. Wont be able to see it burnt but the wire within it will be burnt. cheers mick
|
||
27-10-2007, 01:08 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
also if you plan to run 2 things there id a hole for a second socket near the BEM on the right side so you can add a second one I belive the high series cars had a socket fitted here
|
||
27-10-2007, 02:14 PM | #5 | ||
Regular Member
Join Date: Sep 2006
Posts: 87
|
Sometimes the end part of the lighter can come off inside the socket if it were me i'd check that first if it is in there .
You should be able to remove it with a screwdriver if that is the problem. Check the fuse it is a blue 15 amp one if its blown make sure you replace with same amp/colour. It is the fourth fuse from the lefthand side on the top row which goes 10,15,5,15 (this is the one) If those instructions don't confuse you nothing will Good luck with it.
__________________
My Car |
||
27-10-2007, 04:47 PM | #6 | ||
Starter Motor
Join Date: Aug 2007
Location: Knoxfield
Posts: 23
|
I had the same problem 2 weeks ago. When the gas was installed and the radio etc had to come out so that the dual fuel switch could be installed, the cig lighter wire was not re connected. You can get your hand in behind from the right hand side, and feel for any lose wires. Otherwise check the fuse. Little fiddly but do-able
|
||
28-10-2007, 10:48 AM | #7 | ||
FF.Com.Au Hardcore
Join Date: Sep 2007
Posts: 717
|
I checked the fuse and it's fine.
I can't quite get my hand behind the centre console, so i can't tell if anything is loose. How do i go about removing the socket through the front? |
||
28-10-2007, 11:57 AM | #8 | ||
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
just stick your thumb in the socket and twist it a bit anti-clockwise wilst pulling on it
|
||
05-07-2020, 11:19 AM | #9 | ||
Regular Member
Join Date: Apr 2019
Location: Munno Para , SA
Posts: 37
|
Excellent post, noticed yesterday the one in my Territorys rear cosole and the one right down the back dont work but the one in the dash does. Both the non working ones are getting power but didnt realise that was a fusible link on them. I guess its time for a couple of new sockets. Thank you for the excellent info
|
||
This user likes this post: |