|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-05-2015, 05:42 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 1,600
|
Hi All. I am trying to put a set of 15x7 rims on a capri with a 9inch diff in the back. thet all fits. I am having dramas getting the fronts to fit due to the tyre hitting the strut. I currently have a 205 50 15 tyre on it. What size rim and rubber are you blokes running on your fronts ? It have a falcon brake upgrade on it. Unsure of which type tho...
|
||
|
|
|
05-05-2015, 06:34 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2012
Location: Adelaide
Posts: 2,252
|
I run Capri front struts on My Mk1 escort race car and have 215/45/15 on 8 inch rims on the front. To do this I run a 10mm offset front hub (alloy) and 20mm spacers (10mm shown) but needed extra clearance when its 2 1/4 inch springs are wound down low. Only problem with all that is I cant remember the wheel offset. I know +12 or +18 14x6 also rub.
  JP |
||
|
|
|
|
05-05-2015, 06:45 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 1,600
|
we are running the same strut setup by the looks of that. who hooked you up with the alloy hubs etc ? we have to go thru engineers as well. that dont really look like it would pass engineers.. do your tyres hang out past the guards ? ours are in line at present using 7" rim and i can see no way to pull them in tighter as clearance between strut and tyre is about 5mm right now.
|
||
|
|
|
|
05-05-2015, 06:52 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2012
Location: Adelaide
Posts: 2,252
|
Mine an escort though and a race only car. I'm a photo Hoare too
Hubs are ex UK, don't know about legality? with your tyre hitting the strut how much clearance to the guard. does the falcon brake conversion alter the wheel mounting face offset? should be able to get a 205 in there until you turn the wheel if you run decent caster   
|
||
|
|
|
| This user likes this post: |
|
05-05-2015, 07:30 PM
|
#5 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
The Escort green beast has bubble arches giving more clearance.
Your should be able to get 205/60x13 under the standard Capri Mk1 arch. 7" rims are a challenge whatever tyre size on the MK1 (max 6"), Mk2/3 are a doddle and had std 7" on some models. Sounds like you are pushing the boundaries a bit. Is the car lowered ? If so, this is probably compounding the problem. You may be able to stretch the arches (roll the lip) a bit to get your tyres under. NFI about offsets, I'm still running standard 185/70x13 on 5.5" Revolution Rebel rims (zero clearance issues !!) |
||
|
|
|
|
06-05-2015, 08:30 AM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 1,600
|
bugger. not planning on running that much camber. im thinking 6" may be the go like u say allan. we are trying to run 15" rims so we can use larger discs etc. i will grab a few pics to show. cheers for helping fellas
|
||
|
|
|
|
06-05-2015, 12:26 PM
|
#7 | ||
|
Rally Nut
Join Date: Feb 2009
Location: Melbourne
Posts: 297
|
on my MK1 capri I ran 15x7 challengers but I had the RS3100 style lip on mine which lines up with Allan about stretching the arches....
|
||
|
|
|
|
07-05-2015, 06:32 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 1,600
|
so, what are most of the capris running on the road for sizes ? i think with playing we can do a 15x7 under standard guards.... tyre size not so sure
|
||
|
|
|
|
08-05-2015, 06:35 PM
|
#9 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
Tyre 1 - 185/70x13
Tyre 2 - 215/50x15 (7" rim) Compare Tyre 1 to Tyre 2 http://tire-size-conversion.com/tire-size-calculator/ Diameter = +1.3% Width = +16.2% Sidewall = -17.1% Circumference = +1.2% Revs/Mile = -1.1% 60mph becomes 60.8mph |
||
|
|
|
|
08-05-2015, 06:41 PM
|
#10 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2005
Posts: 1,503
|
Mine years ago had XW discs/calipers and the 14" XD Ghia wheels on the front.
7inch would need the right offset as not a lot of room under there
__________________
successfull trades with davway,ozziechief,Damon, Big Trev, Howey, BJ , Niko, Davocol,klawsterfobik and XCwillo |
||
|
|
|
|
08-05-2015, 07:21 PM
|
#11 | ||
|
Starter Motor
Join Date: Nov 2013
Posts: 21
|
Offset, that's what its all about. You have to match the offset to the rim width to balance it correctly to get the maximum width without rims/tyres fouling on suspension. Maybe try rimtuck.com but I think that might be focused on jdm cars.
|
||
|
|
|
|
13-05-2015, 12:14 PM
|
#12 | ||
|
Regular Member
Join Date: Sep 2006
Location: Perth
Posts: 215
|
Im running 16x7 el xr8 rims with 205 50 16 tyres with standard struts and rolled guards.
|
||
|
|
|
Rim Sizes on Mk1 Capri
Hybrid Mode