Axle Spacers

Ben85 · 24-03-2009, 03:47 PM

Ok guys, i was looking at rear axle spacers online today. You can get 10mm, 12mm, and 20.5mm. Are they a good investment? Will they improve the dynamics of the car?

Thanx

Twinpiston · 24-03-2009, 09:43 PM

I don't know about the dynamics, but they make the cars look hot when really low!!!

Where are you looking at them?

Ben85 · 24-03-2009, 11:15 PM

http://www.pumaspeed.co.uk/category.php?catid=1&subid=8 Thats where i was looking at them. They are in the suspension upgrades. They are called rear axle handling upgrade.

xr4racer · 24-03-2009, 11:34 PM

Try to buy them somewhere else :-(

Ben85 · 25-03-2009, 11:10 AM

Quote:

Originally Posted by xr4racer

Try to buy them somewhere else :-(

Why do you say that mate?

xr4racer · 26-03-2009, 11:01 PM

Quote:

Originally Posted by Ben85

Why do you say that mate?

My dealings show that they are very helpful until they get your credit card details. Then you cease to exist!

WPN XR6T · 30-03-2009, 01:31 PM

Quote:

Originally Posted by xr4racer

My dealings show that they are very helpful until they get your credit card details. Then you cease to exist!

I concur, I purchased a set of spaces about 6 weeks ago from these guys, and they arn't really intrested in what happened to them between clicking "submit" and them (not) turning up here.

Scareybear · 25-03-2009, 09:59 PM

Be aware it is not legal to use them on the road in Australia, and as such will void your insurance.

LethalLeigh · 25-03-2009, 11:03 PM

Quote:

Originally Posted by Scareybear

Be aware it is not legal to use them on the road in Australia, and as such will void your insurance.

Even though they're axle spacers rather than hub spacers?

robjh80 · 26-03-2009, 02:22 PM

Quote:

Originally Posted by Scareybear

Be aware it is not legal to use them on the road in Australia, and as such will void your insurance.

Exactly ... I tried to point this out a couple of months back but as usual was wasting my breath ... here's the link to that discussion

http://www.fordfiestaxr4.com/forums/...906&highlight=

svo supporter · 27-03-2009, 01:23 AM

Quote:

Originally Posted by robjh80

Exactly ... I tried to point this out a couple of months back but as usual was wasting my breath ... here's the link to that discussion

http://www.fordfiestaxr4.com/forums/...906&highlight=

Hey mate. Sometimes it's pointless trying to get a point across to people about things being illegal to fit, as they just don't comprehend.

The best thing you can do is mention it, and if they don't want to listen, then laugh when they get pinged for using them.

Ben85 · 26-03-2009, 04:18 PM

So we are confident that they are definately illegal in NSW?

Piotr · 27-03-2009, 01:01 AM

Quote:

Originally Posted by Ben85

So we are confident that they are definately illegal in NSW?

From my understanding of the law in NSW they are legal.

"The fitment of wheel spacers (or adaptors for dual wheel conversions) between the wheel mounting face and the road wheel is not permitted unless fitted as original equipment by the vehicle manufacturer"

But check with the RTA

Scareybear · 27-03-2009, 11:38 AM

Quote:

Originally Posted by Piotr

From my understanding of the law in NSW they are legal.

"The fitment of wheel spacers (or adaptors for dual wheel conversions) between the wheel mounting face and the road wheel is not permitted unless fitted as original equipment by the vehicle manufacturer"

But check with the RTA

they're not fitted as original equipment.

robjh80 · 27-03-2009, 01:57 PM

Quote:

Originally Posted by Scareybear

they're not fitted as original equipment.

BINGO!

Oh how refreshing it is to read posts from people of decent intellect

Unfortunately Carey the usual suspects will soon post again with words of wisdom like ... "but if they have Ford stamped on them, you should be able to get away with it, how would anyone know" ..

:

Piotr · 27-03-2009, 03:53 PM

Quote:

Originally Posted by Scareybear

they're not fitted as original equipment.

Read closer

"between the wheel mounting face and the road wheel"

These spacers don't sit between the wheel mounting face and the road wheel and thus that section does not apply.

robjh80 · 28-03-2009, 08:59 AM

Quote:

Originally Posted by Piotr

Read closer

RTA Response:

Benjamin
All spacers on hub or wheel assemblies are not permitted unless they are fitted standard by the manufacturer of the vehicle.

RegardsTechnical Enquiries

jonathan_smith@rta.nsw.gov.au on behalf of Technical Enquiries

I suggest you "read closer" Piotr
Is there still anything you don't quite understand or comprehend here?

For anyone who currently has these on their car, you are driving an illegally modified vehicle and as such you will not be covered by insurance.

For anyone considering these, personally I would suggest you reconsider.

I think this ones cooked .... case closed.

BlackLS · 27-03-2009, 04:25 PM

I've thought of this but I wasn't sure if there was actual products that do this. I cant see this being as dangerous as wheel spacers

Ben85 · 27-03-2009, 04:25 PM

So i should ring the RTA. LOL

Piotr · 27-03-2009, 05:08 PM

Quote:

Originally Posted by Ben85

So i should ring the RTA. LOL

Id got to an engineers office

That way to talk to someone who must know what they are talking about. IF you simply ring the RTA you will get a desk jockey

Ben85 · 27-03-2009, 05:49 PM

My question: I'm looking at having rear axle spacers fitted to my 2006 Fiesta, these spacers are the type that fit in between the axle and the rear hub back plate. So not between the wheel mounting face and the road wheel. they are advertised as a handling upgrade. Here is the link http /www.pumaspeed.co.uk/showdetails.php?id=562

Thanx

RTA Response:

Benjamin
All spacers on hub or wheel assemblies are not permitted unless they are fitted standard by the manufacturer of the vehicle.

RegardsTechnical Enquiries

jonathan_smith@rta.nsw.gov.au on behalf of Technical Enquiries

MISTA FIESTA · 28-03-2009, 09:06 AM

I wouldnt risk it mainly because ive personally heard lots of horror stories. But if your gonna do it then do it. No one will stop you here, but just listen to what poeples are saying.

This might be a dumb question but why couldnt you just get wider rims to increase the road contact??

Ben85 · 29-03-2009, 06:54 PM

Well i have already purchased rims 12months ago, and it would only cost around $100 to have the spacers fitted. But seeing astho they are illegal, that wont be happening anymore.

WPN XR6T · 01-04-2009, 02:03 PM

Having just badmouthed the above, they turned up today. I intend on fitting them myself, and I'll let you guys know how I go.
Cheers
Matt

WPN XR6T · 07-04-2009, 10:20 PM

So, I fitted them last night. Not too bad in the looks department, but it is probably better to go with the 12.5mm ones for no other reason other than I think the extra 2.5mm will still clear everything even when lowered.
How are they to fit yourself? Pretty easy if your handy with a spanner. One point tho', the bolts supplied with them are too long on the 10mm jobbies, and you need extra washers to space out the top two bolts so they dont foul on the stubb axels.
Dynamics? Fantastic in a straight line. Much, much more stable, you really have to drive one of these things with this done to it, even with the smallest 10mm spaces, it is bloody fantastic!
Round corners is better too, not so much an improvement as straight line stability, but the rear does feel much more grounded. I recommend this if you are thinking seriously about improving your handling, it is a great cheap mod that you can do yourself and really makes a difference to the dynamics of an already well sorted package.
Matt

svo supporter · 07-04-2009, 11:22 PM

Quote:

Originally Posted by WPN XR6T

So, I fitted them last night. Not too bad in the looks department, but it is probably better to go with the 12.5mm ones for no other reason other than I think the extra 2.5mm will still clear everything even when lowered.
How are they to fit yourself? Pretty easy if your handy with a spanner. One point tho', the bolts supplied with them are too long on the 10mm jobbies, and you need extra washers to space out the top two bolts so they dont foul on the stubb axels.
Dynamics? Fantastic in a straight line. Much, much more stable, you really have to drive one of these things with this done to it, even with the smallest 10mm spaces, it is bloody fantastic!
Round corners is better too, not so much an improvement as straight line stability, but the rear does feel much more grounded. I recommend this if you are thinking seriously about improving your handling, it is a great cheap mod that you can do yourself and really makes a difference to the dynamics of an already well sorted package.
Matt

That's until the unfortunate thing happens and the insurance company is involved.

zbeasty · 23-04-2009, 12:15 AM

Quote:

Originally Posted by WPN XR6T

So, I fitted them last night. Not too bad in the looks department, but it is probably better to go with the 12.5mm ones for no other reason other than I think the extra 2.5mm will still clear everything even when lowered.
Matt

What wheels are you running? Mine is lowered 40mm and I have 18x7.5 with 215/35 and it rubs going over anything at speed. The 40 or 50 extra kilos of stereo in the back probably doesn't help but I think I'd have major clearance issues if I fitted the spacers. Don't get me wrong I'd probably love the handling improvement but I like my tunes and the look of the 18's.

You may have seen me around the area black WP zetec with mirror tint and white rims.

WPN XR6T · 25-04-2009, 08:24 PM

Quote:

Originally Posted by zbeasty

What wheels are you running? Mine is lowered 40mm and I have 18x7.5 with 215/35 and it rubs going over anything at speed. The 40 or 50 extra kilos of stereo in the back probably doesn't help but I think I'd have major clearance issues if I fitted the spacers. Don't get me wrong I'd probably love the handling improvement but I like my tunes and the look of the 18's.

You may have seen me around the area black WP zetec with mirror tint and white rims.

Stock XR4 17"'s. If it's already rubbing, yeah you'll probably have issues.

WPN XR6T · 09-04-2009, 07:27 PM

Yeah, well I'm running an aftermarket airfilter - therefore it no longer complies with the Euro 5 EPA regs it did when it was produced and is illegaly modd'ed.
I am also running after market exhaust modd's - as above.
Flash tune? So many regs it's out of control.
Larger brakes with thicker bells, darkest legal tint over factory darkened glass, brakepads other than factory specified. I can go on all night with what can get mine and other blokes cars taken off the road, caneried or rejected from an insurence payout, but at the end of the day, unless the mod is at fault it probably won't be blamed and taken into account.

If you want to leave your car bog stock (and far from me to blame you, these are a great little car stock from the factory floor) thats fine, but as soon as you modify any modern car your pretty much stuffed. So why let fear of the possible stand in your way? Let that happen and you never achive anything.

Just saying do it if you want, if not, stay away, doesn't phase me.

crispymk2 · 10-04-2009, 12:42 AM

I see robjh80 is still banging on about these.

Why come to a forum about cars and the improving of those cars through modifications if you are just going to bag out everyone who tries to improve their cars?

If you want to drive a stock one for the rest of your life go ahead. I know many people who have had crashes in highly modified cars and have received full pay-outs.

As WPN mentioned above, Many basic mods can be considered to be illegal, air filters are a change to the pollution equipment as are all exhaust mods.

As for attempting to link the fitting of rear axle spacers to a persons intelligence, here is a smart and witty retort for you: **swearing removed** You don't know anything about me or my background/education so keep your comments to yourself.