tickford xr8-tseries motor builders- kw readings

[5L]

i thought it would be interesting to see what engine builders made engines that made the most power? i know that different variables come into it, but generally it would be good to know.

my motor was built my sean pearce, and stock it pulled 175rwkw.

does anyone else have there stock outputs and the engine builder (plauqe on drivers side rocker cover)

cheers AUXR8220

[MRJUCY]

I think the way the car has been driven & maintained & the dyno conditions would make more of a variance then the engine builder.
Anyhow D Gariglio 187.5kw for my stock T2 manual.

[james22]

W. Marsicano built my rig, pulled approx 182rwkw stock. Bit of a variance in dyno's isnt going to help much though.

[TIC-302]

Originally Posted by james22

W. Marsicano built my rig, pulled approx 182rwkw stock. Bit of a variance in dyno's isnt going to help much though.

he did my engine too :

[RG]

Originally Posted by james22

W. Marsicano built my rig, pulled approx 182rwkw stock. Bit of a variance in dyno's isnt going to help much though.

He did mine too, I think we all know what I think of his work.

[Whoosha]

Good ol "Hector. M" built mine, they couldn"t fit his last name on the plate, but with 168 stock & 200+ with a few basic mods @ a 13.7 in the bag I dont mine I just call him matey :eclipsee_ :Reverend:

[DJM83]

Originally Posted by Whoosha

I dont mine I just call him matey :eclipsee_ :Reverend:

: : :
I cant remember mine either but mine hasnt seen a dyno YET

[james22]

Originally Posted by RedXR347

He did mine too, I think we all know what I think of his work.

Yeah I have to admit, I've been keeping a close eye on those springs. The amount of 220's that fell over within that month was f&*king ridiculous.

[TIC-302]

Originally Posted by james22

Yeah I have to admit, I've been keeping a close eye on those springs. The amount of 220's that fell over within that month was f&*king ridiculous.

what do you mean by "The amount of 220's that fell over within that month was f&*king ridiculous"?


Guys, I got mine dyno'ed today, i am very very sad with the result !!
30C+ afternoon(hot). The old 220kw auto only made 125kw e

i don't know much about dynos but i can confirm the following:

DynoDynaics dyno
set on RAMP MODE-not shootout mode( apperantly the end result in either mode is the same)

ran in 2nd gear and in 3rd gear(auto), power increased by 1kw in the 3rd gear run , but the torque natuarly increased.
i payed $50 and got 2 sheets which i am very dissapointed with ! :

[DJM83]

Originally Posted by TIC-302

what do you mean by "The amount of 220's that fell over within that month was f&*king ridiculous"?


Guys, I got mine dyno'ed today, i am very very sad with the result !!
30C+ afternoon(hot). The old 220kw auto only made 125kw e

i don't know much about dynos but i can confirm the following:

DynoDynaics dyno
set on RAMP MODE-not shootout mode( apperantly the end result in either mode is the same)

ran in 2nd gear and in 3rd gear(auto), power increased by 1kw in the 3rd gear run , but the torque natuarly increased.
i payed $50 and got 2 sheets which i am very dissapointed with ! :

Dont worry mate i feel mine is lacking to, i dont know why. Not for long it will have an edit and exhaust

[RG]

Originally Posted by TIC-302

what do you mean by "The amount of 220's that fell over within that month was f&*king ridiculous"?

There was a spate of 220's dying. Most were valve springs but I copped a piston, but that is what happens when Unichips go bad and ECU's learn around them.

[AU2PWR]

Originally Posted by TIC-302

what do you mean by "The amount of 220's that fell over within that month was f&*king ridiculous"?


Guys, I got mine dyno'ed today, i am very very sad with the result !!
30C+ afternoon(hot). The old 220kw auto only made 125kw e

i don't know much about dynos but i can confirm the following:

DynoDynaics dyno
set on RAMP MODE-not shootout mode( apperantly the end result in either mode is the same)

ran in 2nd gear and in 3rd gear(auto), power increased by 1kw in the 3rd gear run , but the torque natuarly increased.
i payed $50 and got 2 sheets which i am very dissapointed with ! :

WTF ? Nearly all the 6 Cylinder AU's are on you !

[RG]

Originally Posted by RedXR347

He did mine too, I think we all know what I think of his work.

Whoops, I stuffed up I just checked my plaque today (It lives on my dash) and my builder was actually A Aretsinis.

[AU2PWR]

all dynos are different , theres never going to be the same ,

[5L]

i know it will never be the same, its not like it is a competition.

just good to know who got which builder,

[galaxy xr8]

I'll have to have a look and see who built mine, I can't remember of the top of my head, but with only 4,000klm's on the clock mine made 142rwkw, then 160rwkw with the mod's, same day same dyno.

[GSH]

aint done mine would like to though

[GSH]

mine sez built by...

'n Busu77ilo'

yes its 7`s....maybe its ment to be T`s

[5L]

125kw doesnt seem right, id be going to another dynocentre to compare.

[TIC-302]

he also showed me some graphs of other recent cars he did.

HSV 297KW R8 6.0L VZ made 166kw
ED rx8 sprint bade 117kw, with blower made 168kw.

looks like his dyno reads very low.. but still 125kw is bad, although the 220kw auto did a 7.02sec 0-100km/h on the g-tech !?

[HLC]

Originally Posted by TIC-302

he also showed me some graphs of other recent cars he did.

HSV 297KW R8 6.0L VZ made 166kw
ED rx8 sprint bade 117kw, with blower made 168kw.

looks like his dyno reads very low.. but still 125kw is bad, although the 220kw auto did a 7.02sec 0-100km/h on the g-tech !?

dude, my basically stock I6 pulls 125 rwkw :

[TIC-302]

i know 125kw out of a AU3 XR8 is crap !

where in sydney can i go for a decent run??

[fordAU]

Built by " James Husband " I think... with a signature like his he should have been a Doctor.

No problems so far so James if you are reading this you done good :hihi:

[stiddy]

Originally Posted by TIC-302

i know 125kw out of a AU3 XR8 is crap !

where in sydney can i go for a decent run??

Autotech Engineering <--- one of the better ones.
C&V Performance <-- one of the better ones.
Intune Motorsport <-- its a happy dyno.
High Comp Performance <-- Hard dyno but reasonable I think.
Castle Hill Exhaust Center <-- Fair.
Incar <-- Fair.

Get a dyno run at any of the above.

[The Monty]

Id question that. 166 in an R8 297? I highly doubt it.

[wadsymoo]

my 200kw motor with minor mods and made 156rwkw?

[The_Ghost]

DAMMIT. Mine was built by 'Tong Lam'. Think He was ex subaru!

[BLACKAUXR8]

mine stock made about 178rwkw stock series 3 22o xr8. not sure who built it. Ralph someone i think.

[FTE217]

tic-302 that is one ugly reading for a 220.....never seen one that low.
Mine stock 220 auto was 153 from memory after better headers, Unichip got 179ish.

[RavenLS1]

VZ 297's should read about 220-230rwkw