Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 22-12-2007, 02:13 PM   #1
poolkeeper
Its Resonating!
 
poolkeeper's Avatar
 
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
Default Launching an I6 at the track

Whats it like launching from the line?
Is it instant wheelspin if you have it stalled up?
Im getting a helmet after xmas and would like to have as much knowledge before I go to WSID.

My transmission guy said, I got maybe 8 months life left out of my auto, this was like 10 months ago, might aswell set a benchmark with the slowing dying auto hey.

poolkeeper is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 02:25 PM   #2
stiddy
Banned
 
stiddy's Avatar
 
Join Date: Jan 2005
Location: Beaumont Hills
Posts: 2,536
Default

lol launching hmm... Put it in Nutral rev it up to around 4500rpm and click it to Drive when the light goes green.
stiddy is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 02:27 PM   #3
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default

Quote:
Originally Posted by stiddy
lol launching hmm... Put it in Nutral rev it up to around 4500rpm and click it to Drive when the light goes green.
This would probably give you the best launch, but I'm not sure if you'd make it down the remainding 350mtrs of the track.
StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 02:36 PM   #4
poolkeeper
Its Resonating!
 
poolkeeper's Avatar
 
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
Default

Quote:
Originally Posted by stockoau
This would probably give you the best launch, but I'm not sure if you'd make it down the remainding 350mtrs of the track.
that would be my guess to lol
poolkeeper is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 12:01 PM   #5
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default

Quote:
Originally Posted by stiddy
lol launching hmm... Put it in Nutral rev it up to around 4500rpm and click it to Drive when the light goes green.
just like a drive train only crunchy
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 02:31 PM   #6
stiddy
Banned
 
stiddy's Avatar
 
Join Date: Jan 2005
Location: Beaumont Hills
Posts: 2,536
Default

LOL ahh ive done worse.. NA fairlane, 6200rpm D SLAM.. left the diff all over the road. haha
stiddy is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 02:57 PM   #7
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

No burnout, bit of PSI out of the tyres (I run about 28 in my 235/45 17's), Foot on the brake HARD, put your foot down till it nearly is breaking traction, on the last ORANGE light, let your foot off the brake and mash the accelerator.
I pulled a couple of 2.19's on a stock auto driveline using this technique (3.08's, no LSD, no stall).
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 03:12 PM   #8
3.9from hell
hoons cause global warmin
 
Join Date: Jun 2007
Location: SA
Posts: 776
Default

Quote:
Originally Posted by The Monty
No burnout, bit of PSI out of the tyres (I run about 28 in my 235/45 17's), Foot on the brake HARD, put your foot down till it nearly is breaking traction, on the last ORANGE light, let your foot off the brake and mash the accelerator.
I pulled a couple of 2.19's on a stock auto driveline using this technique (3.08's, no LSD, no stall).

yep thats the way, i can launch my el turbo this way, run low 13 with no wheelspin at all, can launch with 5psi on the guage and still hook up so u should hav no probs at all

helps to hav good rubber tho

best of luck
__________________
"if you believe you can, or believe you cant, your probably right" (henry ford)
3.9from hell is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 03:03 PM   #9
poolkeeper
Its Resonating!
 
poolkeeper's Avatar
 
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
Default

does it hook up good, no pedalling the throttle ?
Ill be using my 45, 235, 17" kelly chargers
poolkeeper is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 03:03 PM   #10
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default

Yeah if your running street tyres you want them cold so no skids
StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 12:56 AM   #11
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

Quote:
Originally Posted by stockoau
Yeah if your running street tyres you want them cold so no skids

what?
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 07:36 AM   #12
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

Quote:
Originally Posted by EvilChief
what?
Street tyres dont like heat, they get hot, they loose there stickiness. On the street is different, you want them warm, but deffinately not hot.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 09:24 AM   #13
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

Quote:
Originally Posted by The Monty
Street tyres dont like heat, they get hot, they loose there stickiness. On the street is different, you want them warm, but deffinately not hot.

interesting tyres you guys got there ...

i consistenytly run better times with warmed up "street" tyres and that is backed up by every vehicle (falcon, commodore, subaru, nissan) i have ever raced on the strip (and that has been a few over the years)
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 03:13 PM   #14
blackers10
FF.Com.Au Hardcore
 
blackers10's Avatar
 
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
Default

the track is about 1000x stickier than the road mate
my 2400 stall worked GREAT at the track..
on the street its all wheel spin LOL
__________________
On The Street Feature Winner Performance Ford Mag
See my car at:-www.aufalcon.com/blackers10
blackers10 is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 03:17 PM   #15
poolkeeper
Its Resonating!
 
poolkeeper's Avatar
 
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
Default

Quote:
Originally Posted by blackers10
the track is about 1000x stickier than the road mate
my 2400 stall worked GREAT at the track..
on the street its all wheel spin LOL
I thought it would be the other way around on street tyres.
poolkeeper is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 04:05 PM   #16
ClassicAU
FF.Com.Au Hardcore
 
Join Date: Feb 2005
Posts: 1,558
Default

How about those of us with a third pedal? I have no idea how to launch my car properly yet. Its either bog down or sideways action! Whats the best technique for a manual I6?

Evan
ClassicAU is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 04:11 PM   #17
atec77
FF.Com.Au Hardcore
 
Join Date: Sep 2005
Location: Brisbane
Posts: 3,568
Default

Quote:
Originally Posted by ClassicAU
How about those of us with a third pedal? I have no idea how to launch my car properly yet. Its either bog down or sideways action! Whats the best technique for a manual I6?

Evan
you need some practise . minimum spin and dont drop the clutch , modest revs and drive it away then work out from there what hooks up best .
couple of goes and you will realise sideways or spins are slow.
atec77 is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 05:00 PM   #18
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by ClassicAU
How about those of us with a third pedal? I have no idea how to launch my car properly yet. Its either bog down or sideways action! Whats the best technique for a manual I6?

Evan
Drop the clutch at about 2500 to 3000rpm, then feather the throttle to avoid wheelspin, then grab second - no clutch, off the throttle though. Then 3rd (will need clutch for that one), then fourth (no clutch).
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 06:03 PM   #19
ClassicAU
FF.Com.Au Hardcore
 
Join Date: Feb 2005
Posts: 1,558
Default

Quote:
Originally Posted by JC
Drop the clutch at about 2500 to 3000rpm, then feather the throttle to avoid wheelspin, then grab second - no clutch, off the throttle though. Then 3rd (will need clutch for that one), then fourth (no clutch).
No clutch?!? Wouldn't that just shatter the gearbox? Sounds pretty scary, I don't know if i am that game to get a good time!

Evan
ClassicAU is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 05:22 PM   #20
Bobman
Regulator
 
Bobman's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 4,168
Default

Doesn't all this special "preparation" kinda ruin the fun? It's like cheating.

Imagine if you had someone pull you back on an elastic rope and then let you go in a baton relay.

Nothing wrong with a normal launch.
__________________
Regards
Bobby

Current Cars:
2000 AU2 Fairmont (2019-current)
2003 BA1 Falcon Divvy Van (2017-current)
2009 VW Mk6 Golf 118TSi (2020-current)
Previous Cars:
2003 MCX10R Avalon VXi (2017-2020)
1995 EF1 Falcon GLi (2016-2019)
1997 XH2 Falcon Van OPT20 (2016-2019)
2006 BF Fairlane Ghia (2013-2018)
2001 AU3 Futura (2010-2013)
1996 EL Fairmont (2008-2010)
2004 BA XR6 (2005-2008)
2001 AU2 Forte (2005-2006)
1988 EA Fairmont Ghia (2003-2005)
1984 AR Telstar TX5 Ghia (2001-2005)
Bobman is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2007, 05:37 PM   #21
schuldiner
FF.Com.Au Hardcore
 
Join Date: Jun 2007
Location: keysborough, vic
Posts: 504
Default

Quote:
Originally Posted by Bobman
Doesn't all this special "preparation" kinda ruin the fun? It's like cheating.

Imagine if you had someone pull you back on an elastic rope and then let you go in a baton relay.

Nothing wrong with a normal launch.
how is it like cheating? is it cheating to come on the forums and ask for a diagnosis on a problem with your car? or should you just go in blind? little extra info can go a long way as i'm sure you know.
__________________
Everything always works out when you just do whatever you want and don't worry about the consequences.

see my ute here

AU parts for sale
schuldiner is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 09:24 AM   #22
poolkeeper
Its Resonating!
 
poolkeeper's Avatar
 
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
Default

Well at the moment, I have 2 techniques that Im going to try. Whether I get the same result on the track is a different story.
poolkeeper is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 10:00 AM   #23
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default

A few years back I was having the same argument, trying to tell some guys I worked with that your better off not pulling a skid, streets work better cold. After an hour of wasted words, I went out to a private road with them and gave them a demonstration of what I was talking about. Even after them seeing for themselves they continued to argue the point because rubber is rubber. Anyway, EvilChief, whatever works for you.
StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 10:15 AM   #24
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by stockoau
A few years back I was having the same argument, trying to tell some guys I worked with that your better off not pulling a skid, streets work better cold. After an hour of wasted words, I went out to a private road with them and gave them a demonstration of what I was talking about. Even after them seeing for themselves they continued to argue the point because rubber is rubber. Anyway, EvilChief, whatever works for you.
Track stickiness etc is totally different to what you call a "private road". Warm rubber and the drag strip go hand in had to provide a better launch. Warm rubber and the street go hand in had to provide better grip. Cold rubber is only useful in packets, and even then, it is only potentially useable - it actually gets better use wet and warm.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 10:24 AM   #25
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default

All I know is both on the strip (No not in a falcon) and private roads I have found I had better launches and less wheel spin if I didn't pull a skid first.
StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 12:11 PM   #26
blackers10
FF.Com.Au Hardcore
 
blackers10's Avatar
 
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
Default

i figured that the burnout was to help bring up the heat ..

on the street your tyres are warm already due to driving for the last 1/2 hour or so etc etc

i think a burnout for at LEAST your 1st run is always good
coz its fun hehe

after that . do a coupla with and a couple without burnouts etc
see what you like best
its all fun.. thats what the strip is for
__________________
On The Street Feature Winner Performance Ford Mag
See my car at:-www.aufalcon.com/blackers10
blackers10 is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 12:44 PM   #27
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

doing a burnout is not only there to warm up the tyres, it is also to clean the surface area (remove old rubber, grime, dust, water, oil etc)

I have been raing for 7 years and warm tyres have always worked better ;)

btw ever ran ur hand over a "hot" tyre vs a "cold" tyre ... see which one is stickier ;)
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 01:16 PM   #28
Grippy
Racing improves the breed
 
Grippy's Avatar
 
Join Date: Apr 2006
Location: SE Melbourne
Posts: 3,982
Default

Quote:
Originally Posted by EvilChief
doing a burnout is not only there to warm up the tyres, it is also to clean the surface area (remove old rubber, grime, dust, water, oil etc)

I have been raing for 7 years and warm tyres have always worked better ;)

btw ever ran ur hand over a "hot" tyre vs a "cold" tyre ... see which one is stickier ;)
Very true, especially when at Calder with the return road like goat country with loose gravel getting stuck to your tyres, its a good idea to do a little skid to get rid of the crap you pick up after every run.
__________________
1970 Mini Cooper S Historic Group Nc Touring car

1964 Mini Cooper S Historic Group Nb Touring car

2024 Subaru Outback Touring XT

Victorian Hill Climb Championship
Grippy is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 01:04 PM   #29
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

Thats fair enough. But every run Ive done with a burnout, is always slower then no burnout, its probably to do more with the different compounds in the tyres we all use, no two tyres will be the same.
Also though, do a burnout, and see how high you trans temp goes especially with the auto, and a hot gearbox aint gunna be good for your times.
In saying that though, everyone probably has a different technique, and I think for each persons own combo, you will need to try a few before you find the right one. No two combos will ever react the same way.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 23-12-2007, 01:25 PM   #30
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

Quote:
Originally Posted by The Monty
Thats fair enough. But every run Ive done with a burnout, is always slower then no burnout, its probably to do more with the different compounds in the tyres we all use, no two tyres will be the same.
Also though, do a burnout, and see how high you trans temp goes especially with the auto, and a hot gearbox aint gunna be good for your times.
In saying that though, everyone probably has a different technique, and I think for each persons own combo, you will need to try a few before you find the right one. No two combos will ever react the same way.
correct ...

i never do a 5min burnbout (unlike some ppl i have seen) .. a quick squirt over the water with a quoick post run/launch.

also i am somtimes fortunate enough to run after a big dragster who just left a nice set of very stick tyres marks in front of me. also traction compound used around australia is different all together.

every car anbd every driver requirews a different technicque.

For example launching my Au vs my VP are two completely different hats. each will require a different launch rpm, diferent hook up, brake application etc etc

it all comes down to practice practice practice and more practice. it took me close to 6 months to have my launches optimized on my AU and that was being out there every week practicing.

once my new engine and transmission go into my car it will require a completely different technique once again.
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL