|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
23-05-2008, 03:32 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2007
Posts: 158
|
Hi,does any body know the procedure for removing rear disks on an au1 ute.
I have removed the caliper and grub screw but it still seems to be stuck . The handbrake cable has been disconected .I have removed the grommet and looked inside, is there a way of backing the handbrake off further through this hole ?I think the handbrake shoes have created a ridge does this sound right? |
||
|
|
|
23-05-2008, 04:08 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 2,256
|
They would be nice and tight on the handbrake shoes.
Give the rotor a few good smacks with a hammer, it will loosen them up, and then just pull them off by pulling at the rotor from each side. |
||
|
|
|
|
23-05-2008, 05:50 PM
|
#3 | |||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Moree, NSW
Posts: 2,076
|
Would it be a good idea to leave a couple of wheel nuts on while pulling so it does come off in a hurry and hit you?
__________________
Nathan 2005 FPV BF Super Pursuit The new toy (now sold) The SP The old ute (sold) www.aufalcon.com/nc1183 Build Thread Quote:
|
|||
|
|
|
|
24-05-2008, 12:22 AM
|
#4 | ||
|
Regular Member
Join Date: Jun 2007
Posts: 158
|
I have had a puller on it and it has bent the rotor out of shape ,I have hit it with a hammer at least 50, times that method dosent seem too be working!
what else could be causing this ? |
||
|
|
|
|
24-05-2008, 10:09 AM
|
#5 | ||
|
Dent Removal
Join Date: Aug 2007
Location: 32°09′40″S 116°01′12″E WA
Posts: 386
|
I wonder if it has rusted around the boss area on the axle and this is stopping it from coming off, perhaps a bit of heat applied to the rotor but keep the axle "boss" cold may help?
P.S don't forget the fuel tank resides near by and there are other ignitable products around also, so be careful with a naked flame |
||
|
|
|
|
24-05-2008, 10:21 AM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 2,256
|
It will be rusty around the axle flange and around the studs for sure.
Give it some hammering on the face of the rotor around the studs to loosen it up. They are a pain but the do come off. |
||
|
|
|
|
27-05-2008, 11:51 PM
|
#7 | ||
|
Regular Member
Join Date: Jun 2007
Posts: 158
|
Thanks for the replies , one side came off easily the other i had to soak with crc for three days . All fixed now
|
||
|
|
|
|
29-05-2008, 11:28 PM
|
#8 | ||
|
Boost Addict
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
|
btw u can unadjust the handbrake through the back ;)
__________________
N12 Pulsar - sold Gen1 Liberty Turbo - sold VP Commodore Turbo - sold LN65 Hilux Turbo - sold EL31 Corolla Turbo - sold Ford AU Ute Turbo - sold Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build) Ford BA XR6T Ute - daily driver Ford FG XR6T Sedan - cruiser do you see a general trend? I DO  Can't live with it, can't live without it! |
||
|
|
|
Removing rear disks au 1 ute
Hybrid Mode