|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-06-2009, 04:31 PM
|
#1 | ||
|
Rusticating
Join Date: Mar 2009
Location: Lower Lakes, SA
Posts: 541
|
I may have done a dumb thing. I bought a cruise control off ebay to fit to the ute. It came from a fairmont. He says the loom for the actuator thingy is part of the main loom and mine should have it. It doesn't. I'm guessing the looming is different between models with CC standard and optional. If I'm right, what are my chances of finding that loom on its own? Or should I return it and find a complete one from ... which models? Thanks
__________________
Territory SYII RWD, BFII RTV tray |
||
|
|
|
09-06-2009, 05:28 PM
|
#2 | ||
|
Regular Member
Join Date: Mar 2009
Posts: 33
|
yes you have to change the loom if you look behind your fuse box there is a big orange connector that's the loom u need it goes though the fire wall behind the brake booster you will also need the pressure switch on the brake master cylinder your Ute is a series 3 so make sure it comes of a series 2/3 as series 1 looms are different i assume you have the stork controls steering wheel back and and cruise swiches with all the parts quite an easy job
|
||
|
|
|
Cruise control loom : Fairmont / ute
Hybrid Mode