|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
14-06-2011, 10:21 AM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2006
Posts: 4
|
Hi Guys,
I recently changed the brake pads on my AU Series 1 Futura. During this process, I noticed that the black metal disc/shield (ABS sensor?) that sits inside of the rotor was covered with moist oil and dirt. I'm guessing oil is spraying from the diff/right rear axle onto this black disc? Note that the left rear wheel was fine (no oil spray). Just wondering what is involved in rectifying this? Is it an axle seal or a diff seal, is it easy to replace or am I best getting a mechanic to do it? |
||
|
|
|
14-06-2011, 11:48 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: St John's Park NSW
Posts: 1,454
|
You will need to remove the axle and change the brearing, seal and lock ring.
If you don't have access to a press it might be worthwhile to take it to a mecahnic and have them do the replacement. |
||
|
|
|
Rear Axle Oil Leak
Hybrid Mode