Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Closed Thread
 
Thread Tools Display Modes
Old 20-12-2011, 09:56 PM   #1
sirweasle
Regular Member
 
Join Date: Oct 2008
Posts: 86
Default Engine size restrictions for p platers

Here's something to think on tonight...

I own both an au Fairlane, 6cyl, 185rwhp, and a 1967 chev impala, 327 v8, 2 speed auto, NO rwhp...

I can't legally drive or register my impala... Even tho 0 - 100km/h is like 30seconds,(actually i dont think i ever got it to 100km/h. it's got no power, no speed. But it has this big dangerous 44yr old v8 in it according the queensland transport, so i can't drive it...

My fairlane however has a 6 cyl engine and no worries mate, go for it. And anybody that has a stock 6cyl falcon knows they are pretty quick... (for a stock car)

i sent an email away to Queensland transport department stating my frustration with the system and i got an email back saying, "they are looking into amending the legislation for p plate drivers"

IS it just me or does this all seem like a load of ****, atleast give these old cars a chance to have a power to weight test done. Don't just immediately rule it out because it's cylinder number.

Moral of my rant is, it doesnt matter how big or small and engine is... in the long run, if your enough of a dumb-*** to wind the car up to ridiculous speeds, you can still crash out and kill yourself and others...

A swift is faster then my impala for F*(& sake... and that's saying something!



sirweasle is offline  
Old 20-12-2011, 10:00 PM   #2
Windsor342ci
The Experience...
 
Windsor342ci's Avatar
 
Join Date: Sep 2010
Posts: 1,017
Default Re: Engine size restrictions for p platers

Best of luck with this thread lasting brother.
__________________
Her Daily: BF XR6T ZF
His Daily: FGX XR8 ZF
Their Pride: T3 TE50 Manual
Windsor342ci is offline  
Old 20-12-2011, 10:01 PM   #3
350125GO
67 Galaxie Hardtop
 
350125GO's Avatar
 
Join Date: Jul 2008
Location: Penrith, NSW
Posts: 397
Default Re: Engine size restrictions for p platers

Had the same issue mate. Drove my Fairlane for the 3 years, then grabbed a Galaxie (was looking at Impalas) with a big block. Good luck getting it changed, you're gonna need it.
350125GO is offline  
Old 20-12-2011, 10:03 PM   #4
xisled
FF.Com.Au Hardcore
 
Join Date: May 2010
Posts: 3,338
Default Re: Engine size restrictions for p platers

It is not just about the engine, it is about the safety features in the car. You are more likely to survive a small accident in your AU than you are in you Impala. Yes the AU may be quicker but the AU also has airbags and such to back you up, just in case you have a small mishap.

It is not just about how fast your car is. An older V8 that is like brick wall, is more dangerous than a newer car.

But yes both cars at speed will kill.
xisled is offline  
Old 20-12-2011, 10:52 PM   #5
phillyc
FF.Com.Au Hardcore
 
phillyc's Avatar
 
Join Date: Mar 2005
Location: Newcastle
Posts: 3,246
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always factual and beneficial. 
Default Re: Engine size restrictions for p platers

Complain too loud and the bureaucrats will ban the Falcon. They go for lowest common denominator type rules and implement via lots of red tape.

Simple solution. Power to weight and torque to weight. Allow 125kW or 250Nm per tonne kerb weight. Bikes have been like this for years. Initially those rules were capacity of 250cc or less plus power to weight. I think under 650 is okay these days with power and torque limits.

Perhaps incentivise it with ANCAP NCAP rated vehicles.
Ie 0 star / pre rating gets 100kW/200Nm
1 stars 105/210
2 stars 110/220
3 stars 115/230
4 stars 120/240
5 stars 125/250
__________________
BA2 XR8 Rapid M6 Ute - Lid - Tint -18s
226.8rwkW@178kmh/537Nm@140kmh 1/9/2013
14.2@163kmh 23/10/2013

Boss349 built. Not yet run. Waiting on a shell.

Retrotech thread
http://www.fordforums.com.au/showthr...1363569&page=6
phillyc is offline  
Old 21-12-2011, 12:46 AM   #6
2011G6E
FF.Com.Au Hardcore
 
2011G6E's Avatar
 
Join Date: Feb 2011
Location: On The Footplate.
Posts: 5,086
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by xisled
It is not just about the engine, it is about the safety features in the car. You are more likely to survive a small accident in your AU than you are in you Impala. Yes the AU may be quicker but the AU also has airbags and such to back you up, just in case you have a small mishap.

It is not just about how fast your car is. An older V8 that is like brick wall, is more dangerous than a newer car.

But yes both cars at speed will kill.
Sorry, but yes, it is "just about the engine"...they say no turbos, no superchargers, no V8's...full stop. They don't specify "must have air bags, not be too old, have good safety ratings", etc.
2011G6E is offline  
Old 21-12-2011, 11:39 AM   #7
Ben73
FF.Com.Au Hardcore
 
Ben73's Avatar
 
Join Date: Jul 2010
Location: NSW
Posts: 4,344
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by xisled
It is not just about the engine, it is about the safety features in the car. You are more likely to survive a small accident in your AU than you are in you Impala. Yes the AU may be quicker but the AU also has airbags and such to back you up, just in case you have a small mishap.

It is not just about how fast your car is. An older V8 that is like brick wall, is more dangerous than a newer car.
But you are allowed to drive 40 year old brick wall if it has a 6 or 4 cylinder. Still less safe then new cars, but if its a 6 cylinder you will be safe.

The banning V8, turbo and superchargers is just the easiest way for them. They just palm it off into the too hard basket.

When I was looking at 4x4s on my P's I emailed the RTA asking why I couldn't drive a V8 4x4 even though they were slower then most cars P platers owned. The response I got was just a copy and paste of the the normal PR ********.
P plater inexperience blah blah, speed kills, blah blah, big engine deadly, blah blah. They didn't actually answer my question. Too much work.
Ben73 is offline  
Old 21-12-2011, 12:19 PM   #8
pottery beige
FF.Com.Au Hardcore
 
Join Date: Jun 2009
Posts: 18,990
Default Re: Engine size restrictions for p platers

wow.. i couldnt afford decent cars on my Ps.. i only had heaps of ... ......
pottery beige is offline  
Old 20-12-2011, 10:41 PM   #9
sgt_doofey
FF.Com.Au Hardcore
 
sgt_doofey's Avatar
 
Join Date: Aug 2005
Location: Barossa Valley, South Australia
Posts: 3,381
Default Re: Engine size restrictions for p platers

Yes, IMO, it's a bit silly. Even a 0.9L 3 cylinder POV pack will still do 100km/h in to a tree. The problem ain't the car but the person sitting in the front right hand seat.
__________________
Cheers,
Sam.
sgt_doofey is offline  
Old 20-12-2011, 10:51 PM   #10
cheek
FF.Com.Au Hardcore
 
cheek's Avatar
 
Join Date: Jul 2007
Location: Montrose, Victoria
Posts: 1,217
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by sgt_doofey
Yes, IMO, it's a bit silly. Even a 0.9L 3 cylinder POV pack will still do 100km/h in to a tree. The problem ain't the car but the person sitting in the front right hand seat.
Exactly^
Another thing is, driving an old car like an impala you know if you crash into anything your stuffed so you have to drive it accordingly and take it easy. Well I do with my F100 anyway...
cheek is offline  
Old 20-12-2011, 10:57 PM   #11
sirweasle
Regular Member
 
Join Date: Oct 2008
Posts: 86
Default Re: Engine size restrictions for p platers

phillyc... i agree with u completely and its exactly what i stated in the email i sent to tmr. for the others. thanx for posting. i understand the safety issue. but i would hate be in an accident in an.older smaller car. i like the thought of tonnes of steel around me rather then some plastic guards and an airbag. plus my impala has better aftermarket.brakes.then the au anyway... and i hvnt had abs for a year because something is rooted and ford couldnt evn tell me what was wrong... useless...
it may not be logical but big cars make me feel safer...

Last edited by sirweasle; 20-12-2011 at 11:03 PM.
sirweasle is offline  
Old 20-12-2011, 11:06 PM   #12
Ford_The_Win
FF.Com.Au Hardcore
 
Join Date: May 2010
Posts: 1,730
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by sirweasle
phillyc... i agree with u completely. and for the others. thanx for posting. i understand the safety issue. but i would hate be in an accident in an.older smaller car. i like the thought of tonnes of steel around me rather then some plastic guards and an airbag.

it may not be logical but big cars make me feel safer...
I know this has been posted a million times, sorry guys, but watch this sirweasle and it will get rid of that fallacy about big old cars being safe.

http://www.youtube.com/watch?v=Q5Fx_pgxzH8

Big, glitzy, very heavy and solid Bel Air crumples like a coke can, killing the driver, whereas the plastic-fantastic mid-size new car holds up exceptionally well. That's modern tech for ya.

Back to the topic, weren't the initial P-plate restrictions based on a power-to-weight ratio? How come they were changed? The '67 Impala was a slow car even when it was new, I saw a road test video on youtube of the '69 model...13 seconds to 100... you'd struggle to beat a Fiesta off the line.
__________________
2011 FG XR6 Sedan
Ford_The_Win is offline  
Old 21-12-2011, 12:00 AM   #13
sirweasle
Regular Member
 
Join Date: Oct 2008
Posts: 86
Default Re: Engine size restrictions for p platers

gee, that belair is a write-off... but i never specified big OLD cars, just big.

But in the TMR rules, no where do they mention safety features of cars, they are basing their rules on v8 cars or supercharged/turbo cars will kill you easier... Which is rubbish.

And as far as i'm aware in QLD there has never been power to weight for p platers, just 200kw max, no v8 or higher. Can't have a forced induction of any type unless on a diesel... and a certain engine capacity for rotary's which when i checked only allowed a mazda 12a engine...
sirweasle is offline  
Old 21-12-2011, 12:01 AM   #14
falconnut
FF.Com.Au Hardcore
 
Join Date: May 2011
Location: NSW
Posts: 1,428
Default Re: Engine size restrictions for p platers

I agree with you op.

But dont give them any ideas people :\
__________________
2001 Falcon Fairmont AU2
Big turbo coming
Lsd
falconnut is offline  
Old 21-12-2011, 12:18 AM   #15
grandpa_spec_F6
AFF Whore
 
grandpa_spec_F6's Avatar
 
Join Date: Apr 2009
Location: In between gas stations
Posts: 2,246
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: Engine size restrictions for p platers

Please excuse the rant but I see this type of thread once a week at least. It's a complicated answer with multiple layers but I've tried to analyse it as best I can.


Every thread I see a thread regarding this it comes down to the same conclusion... Joe Public doesn't care if you want a "cool" car on your P-Plates, they only care about what the media tells them to care about.

The hysterical cries of "WON'T SOMEONE PLEEEASE THINK OF THE CHILDREN" echo in my mind, as does the media beat-up of car enthusiasts.

It all boils down to politics, the pollies only "care" about getting a vote and thus they prey on bandwagon mentality of the masses that are force fed said BS by the puppet masters controlling the current mass media, which reports on what it's told to in all their almighty bias glory.

What sells? That's the first question that is usually asked. If you saw the latest charity cruise AFF put on across multiple states, with pics of RussellW handing out toys to kids and everyone putting along merrily with their x-mas cheer,.... it'd be heart warming, but would peak as much interest to the general public as road kill.

HOWEVER! If one of those people happened to break the forum rules (and cruise / road rules) and screeched the tyres on a public road as they were leaving, two words, "Open Season". Immediately they are labelled a hoon, everyone knows what it means, everyone knows it's a bad thing...... but how do they know this? Because the media told them of course...

So how did they achieve this instant recognition now hard wired into the general public? Firstly, they took a leaf out of the racism book, pick on a minority i.e. someone who is weaker or of fewer numbers than you and invent a persona for them as a collective. In wartimes this was seen as a way to de-humanise the enemy thus making it easier to kill them, or hate them as a collective, i.e "Let's give Charlie hell!"

Thus "HOON" was born, a faceless, nameless branding of anyone that was deemed to be "in the wrong" or partaking in "objectionable activity" on the road.

BIG PROBLEM!

So you've invented a catchphrase, now you have to give it personality, you have to give it character, depth, something that people can instantly recognise (and victimise) but not feel that they could ever be one themselves... more or less, you have to make sure that it is a derogatory, demeaning term that instantly allows Joe Public to get on their "moral high horse" by providing key identifiers so that people can recognise it.

Bit of a mouthful? Sure is.... and this is where it gets interesting kids.... the lines have long since blurred as to what "IS" and "ISN'T" a "HOON" despite the media's best attempted to spew it's fear mongering indoctrination of the nation far and wide.



Their failure to accurately represent the car culture currently in Australia is of bibilical proportions, so let's go back to the 90's, where one of the most impounded "HOON" cars began.

In the beginning, there was a VN, and it revved like BAM BAM BAM BAM BAM and selected "D" for maximum respect, most likely with Riksta somewhere in the vicinity.

NOT SAFE FOR WORK: http://www.youtube.com/watch?v=yoGKdQxg3rU

Then there was highway drags, and illegal burnout meet and greets, and street drags, and drifting.... then they ran out of actual things to pick on... more so, they ran out of ways to keep a consistent revenue stream via sensational stories that make ma and pa cus at the tellie. Alas, much like Nintendo flogging the Mario franchise like the dead horse it is, they got inventive.

As the beating stick came out the list of what constituted a "HOON" became exponentially longer.

Taking off with a little extra throttle to get in front so you could merge safely ahead? HOON!

Arm resting on the window? HOON!

Car meet and greet with some nice exhaust notes? HOONS!

P-Plater? HOON!

Low car? HOON!

Rims? HOON!

More power than a YARIS? HOON!

Granny in a YARIS doing 105km on the highway? HOON!

For the biggest bucket of FAIL I've ever seen in my life, look up what others now deem as "HOONING": http://stophoons.com/?page_id=297


What I'm getting at here is that now anyone or anything can have the label applied to it as it is subject to Joe Public's interpretation of the word.

The media have done "such a fantastic job" (/sarcasm) at educating everyone, we can now all rest easy knowing that the polies have heard our desperate cries for help and legislating the "tar" (pun intended) out of the road rules.

As Cardinia Highway Patrol Sergeant Nigel Atkins puts it, hooning is: "a mindless epidemic by stupid people that were too afraid to do it in their own streets in fear of parents finding out".... yes.... clearly we're all on the same page here...

Though picking on a minority, the media have adversely affected the vast majority of road-abiding citizens who might not have the same tastes as everyone else.

Yes you are a P-Plater, yes you may be responsible, but the legislation is there to get the polies votes under the thinly veiled guise of "it's to protect you", logic is lost amongst the bleeting of sheep and gnashing of teeth in this debate.

At the end of the day, the polies can and will get votes though bandwagon mentality, the mass media will hype up whatever it can to make a quick buck, and the legislation books will be thrown open to a roar of cheers from the Do-Gooders of society, however they forgot one thing....

YOU CAN'T LEGISLATE AGAINST STUPID!
__________________
Favorite Quote:
Quote:
Originally Posted by Big Damo View Post
My GMC Sierra is banned under Victoria's high powered vehicle laws, and its a 4082kg apartment complex on wheels.
Current Ride: Not a falcon, the struggle is real

Last edited by grandpa_spec_F6; 21-12-2011 at 12:27 AM.
grandpa_spec_F6 is offline  
Old 21-12-2011, 12:39 AM   #16
falconnut
FF.Com.Au Hardcore
 
Join Date: May 2011
Location: NSW
Posts: 1,428
Default Re: Engine size restrictions for p platers

i wish you where my grandpa grandpa_spec_F6

Excellent post, i have had many a rant about how stupid the term 'hoon' is...

But i will leave it there as i have ranted enough about it in real life as well as on other forums over the years.

All i can say is that when i am on my full license and get rid of the greens people will hopefully take me seriously but at the moment as soon as they see the big bearded red blood aussie in a big dirty red falcon they tend not to take my seriously.

Hopefully the bogans and the like will mostly ignore me, but i doubt it :(
__________________
2001 Falcon Fairmont AU2
Big turbo coming
Lsd

Last edited by flappist; 21-12-2011 at 12:40 AM. Reason: do not circumvent the swear filter, it will bite you
falconnut is offline  
Old 21-12-2011, 12:47 AM   #17
sirweasle
Regular Member
 
Join Date: Oct 2008
Posts: 86
Default Re: Engine size restrictions for p platers

and for people who.have tried.... braking without abs pulls you up quicker then with it.

defensive driving courses should be compulsary for all beginner drivers.

just saying...
sirweasle is offline  
Old 21-12-2011, 12:58 AM   #18
falconnut
FF.Com.Au Hardcore
 
Join Date: May 2011
Location: NSW
Posts: 1,428
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by sirweasle
and for people who.have tried.... braking without abs pulls you up quicker then with it.

defensive driving courses should be compulsary for all beginner drivers.

just saying...
http://en.wikipedia.org/wiki/Anti-lo...#Effectiveness



ABS is a life saver and it feels alot better than non ABS
__________________
2001 Falcon Fairmont AU2
Big turbo coming
Lsd
falconnut is offline  
Old 21-12-2011, 01:04 AM   #19
flappist
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 12,077
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by sirweasle
and for people who.have tried.... braking without abs pulls you up quicker then with it.

defensive driving courses should be compulsary for all beginner drivers.

just saying...
Really?

You have research that debunks every single engineering paper ever written?

Wow.........
flappist is offline  
Old 21-12-2011, 10:50 AM   #20
Burnout
Falcon RTV - FG G6ET
Donating Member3
 
Burnout's Avatar
 
Join Date: Mar 2007
Location: In Da Bush, QLD
Posts: 31,849
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by grandpa_spec_F6
YOU CAN'T LEGISLATE AGAINST STUPID!
The first fatal I saw involving a 'P' driver, the vehicle driven was a Datto 1200 Ute.
__________________
BAII RTV - with Raptor V S/C.

RTV Power
FG G6ET 50th Anniversary in Sensation.
While the basic Ford Six was code named Barra, the Turbo version clearly deserved its very own moniker – again enter Gordon Barfield.
We asked him if the engine had actually been called “Seagull” and how that came about.
“Actually it was just call “Gull”, because I named it that. Because we knew it was going to poo on everything”.
Burnout is online now  
Old 21-12-2011, 02:54 PM   #21
sk8xr8
sliding by you...
 
sk8xr8's Avatar
 
Join Date: Jun 2008
Location: werribee, vic.
Posts: 282
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by grandpa_spec_F6
Please excuse the rant but I see this type of thread once a week at least. It's a complicated answer with multiple layers but I've tried to analyse it as best I can.


Every thread I see a thread regarding this it comes down to the same conclusion... Joe Public doesn't care if you want a "cool" car on your P-Plates, they only care about what the media tells them to care about.

The hysterical cries of "WON'T SOMEONE PLEEEASE THINK OF THE CHILDREN" echo in my mind, as does the media beat-up of car enthusiasts.

It all boils down to politics, the pollies only "care" about getting a vote and thus they prey on bandwagon mentality of the masses that are force fed said BS by the puppet masters controlling the current mass media, which reports on what it's told to in all their almighty bias glory.

What sells? That's the first question that is usually asked. If you saw the latest charity cruise AFF put on across multiple states, with pics of RussellW handing out toys to kids and everyone putting along merrily with their x-mas cheer,.... it'd be heart warming, but would peak as much interest to the general public as road kill.

HOWEVER! If one of those people happened to break the forum rules (and cruise / road rules) and screeched the tyres on a public road as they were leaving, two words, "Open Season". Immediately they are labelled a hoon, everyone knows what it means, everyone knows it's a bad thing...... but how do they know this? Because the media told them of course...

So how did they achieve this instant recognition now hard wired into the general public? Firstly, they took a leaf out of the racism book, pick on a minority i.e. someone who is weaker or of fewer numbers than you and invent a persona for them as a collective. In wartimes this was seen as a way to de-humanise the enemy thus making it easier to kill them, or hate them as a collective, i.e "Let's give Charlie hell!"

Thus "HOON" was born, a faceless, nameless branding of anyone that was deemed to be "in the wrong" or partaking in "objectionable activity" on the road.

BIG PROBLEM!

So you've invented a catchphrase, now you have to give it personality, you have to give it character, depth, something that people can instantly recognise (and victimise) but not feel that they could ever be one themselves... more or less, you have to make sure that it is a derogatory, demeaning term that instantly allows Joe Public to get on their "moral high horse" by providing key identifiers so that people can recognise it.

Bit of a mouthful? Sure is.... and this is where it gets interesting kids.... the lines have long since blurred as to what "IS" and "ISN'T" a "HOON" despite the media's best attempted to spew it's fear mongering indoctrination of the nation far and wide.



Their failure to accurately represent the car culture currently in Australia is of bibilical proportions, so let's go back to the 90's, where one of the most impounded "HOON" cars began.

In the beginning, there was a VN, and it revved like BAM BAM BAM BAM BAM and selected "D" for maximum respect, most likely with Riksta somewhere in the vicinity.

NOT SAFE FOR WORK: http://www.youtube.com/watch?v=yoGKdQxg3rU

Then there was highway drags, and illegal burnout meet and greets, and street drags, and drifting.... then they ran out of actual things to pick on... more so, they ran out of ways to keep a consistent revenue stream via sensational stories that make ma and pa cus at the tellie. Alas, much like Nintendo flogging the Mario franchise like the dead horse it is, they got inventive.

As the beating stick came out the list of what constituted a "HOON" became exponentially longer.

Taking off with a little extra throttle to get in front so you could merge safely ahead? HOON!

Arm resting on the window? HOON!

Car meet and greet with some nice exhaust notes? HOONS!

P-Plater? HOON!

Low car? HOON!

Rims? HOON!

More power than a YARIS? HOON!

Granny in a YARIS doing 105km on the highway? HOON!

For the biggest bucket of FAIL I've ever seen in my life, look up what others now deem as "HOONING": http://stophoons.com/?page_id=297


What I'm getting at here is that now anyone or anything can have the label applied to it as it is subject to Joe Public's interpretation of the word.

The media have done "such a fantastic job" (/sarcasm) at educating everyone, we can now all rest easy knowing that the polies have heard our desperate cries for help and legislating the "tar" (pun intended) out of the road rules.

As Cardinia Highway Patrol Sergeant Nigel Atkins puts it, hooning is: "a mindless epidemic by stupid people that were too afraid to do it in their own streets in fear of parents finding out".... yes.... clearly we're all on the same page here...

Though picking on a minority, the media have adversely affected the vast majority of road-abiding citizens who might not have the same tastes as everyone else.

Yes you are a P-Plater, yes you may be responsible, but the legislation is there to get the polies votes under the thinly veiled guise of "it's to protect you", logic is lost amongst the bleeting of sheep and gnashing of teeth in this debate.

At the end of the day, the polies can and will get votes though bandwagon mentality, the mass media will hype up whatever it can to make a quick buck, and the legislation books will be thrown open to a roar of cheers from the Do-Gooders of society, however they forgot one thing....

YOU CAN'T LEGISLATE AGAINST STUPID!


That was VERY VERY well written and so very true, it drives me insane to know that my neighbors who know im a car nut assume I drive like my car is stolen, funny thing that considering they all ask for my help when it comes to their cars, but snicker and gossip about me "driving like an idiot"

Oh, before it is suggested, "SK8XR8" refers to when I used to take my old car to the TRACK...
sk8xr8 is offline  
Old 21-12-2011, 12:28 AM   #22
TheyDontWantMus
Regular Member
 
TheyDontWantMus's Avatar
 
Join Date: Dec 2011
Posts: 484
Default Re: Engine size restrictions for p platers

1980 Holden Kingswood, 5 litre V8, 179kw
2007 Toyota Aurion, 3.5 litre V6, 200kw
TheyDontWantMus is offline  
Old 21-12-2011, 12:29 AM   #23
sirweasle
Regular Member
 
Join Date: Oct 2008
Posts: 86
Default Re: Engine size restrictions for p platers

that was a good read mate, thanx for posting!!
sirweasle is offline  
Old 21-12-2011, 12:35 AM   #24
flappist
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 12,077
Default Re: Engine size restrictions for p platers

Well maybe it is not a good idea to have low experience drivers in any old technology cars that do not have the safety features on modern vehicles.

So how about P platers can drive anything with a 100kw/tonne or lower P/W ratio regardless of engine topology as long as ABS, DSC, airbags and crumple zones....
flappist is offline  
Old 21-12-2011, 12:35 AM   #25
grandpa_spec_F6
AFF Whore
 
grandpa_spec_F6's Avatar
 
Join Date: Apr 2009
Location: In between gas stations
Posts: 2,246
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: Engine size restrictions for p platers

For a good read check out Nerida Leal's thesis, facinating stuff, particularly, read 1.3 - Current approaches to dealing with the problem.

http://eprints.qut.edu.au/43350/1/Ne...eal_Thesis.pdf
__________________
Favorite Quote:
Quote:
Originally Posted by Big Damo View Post
My GMC Sierra is banned under Victoria's high powered vehicle laws, and its a 4082kg apartment complex on wheels.
Current Ride: Not a falcon, the struggle is real
grandpa_spec_F6 is offline  
Old 21-12-2011, 01:07 AM   #26
sirweasle
Regular Member
 
Join Date: Oct 2008
Posts: 86
Default Re: Engine size restrictions for p platers

when i did a defensive driving course they let us compare stopping distance with and without abs at 80kmh on wet concrete... if u could brake hard without locking up... u stop quicker then just mashin the brake and letting the abs take control. this was in a 09 corolla. maybe not all cars are like this.
sirweasle is offline  
Old 21-12-2011, 11:18 AM   #27
flappist
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 12,077
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by sirweasle
when i did a defensive driving course they let us compare stopping distance with and without abs at 80kmh on wet concrete... if u could brake hard without locking up... u stop quicker then just mashin the brake and letting the abs take control. this was in a 09 corolla. maybe not all cars are like this.
So on a smooth flat known surface when braking in a non emergency situation with no other obsticles, stationary or moving, while giving 100% attention to a braking manouvre that is pre-planned you can stop more quickly than letting a computer control it for you?

Yep, that is how all real life road emergencies happen........
flappist is offline  
Old 21-12-2011, 11:30 AM   #28
TheyDontWantMus
Regular Member
 
TheyDontWantMus's Avatar
 
Join Date: Dec 2011
Posts: 484
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by flappist

Yep, that is how all real life road emergencies happen........
mine do!
TheyDontWantMus is offline  
Old 21-12-2011, 03:43 PM   #29
Rodp
Regular Schmuck
 
Rodp's Avatar
 
Join Date: Dec 2004
Posts: 5,640
Default Re: Engine size restrictions for p platers

Quote:
Originally Posted by sirweasle
when i did a defensive driving course they let us compare stopping distance with and without abs at 80kmh on wet concrete... if u could brake hard without locking up... u stop quicker then just mashin the brake and letting the abs take control. this was in a 09 corolla. maybe not all cars are like this.
The problem with this method is if you are faced with an emergency situation, you are more likely to mash the brake instead of threshold braking unless you are highly experienced. P platers are not highly experienced. 99.9% of drivers on the road would likely just mash the brake.
Rodp is offline  
Old 21-12-2011, 01:19 AM   #30
sirweasle
Regular Member
 
Join Date: Oct 2008
Posts: 86
Default Re: Engine size restrictions for p platers

http://www.drivingfast.net/car-control/braking.htm#4

READ that

Threshold braking is the term i was referring to.
sirweasle is offline  
Closed Thread


Forum Jump


All times are GMT +11. The time now is 01:49 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL