Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 26-09-2020, 04:13 PM   #1
ToyotaCorolla
Regular Member
 
Join Date: Oct 2018
Posts: 36
Default AU Falcon Power Steering hose replacement.

My high pressure power steering hose is leaking, so I went to repco to buy a replacement

However, I'm having a hard time figuring how to remove the old hose from this plastic holder...

ToyotaCorolla is offline   Reply With Quote Multi-Quote with this Post
Old 26-09-2020, 04:55 PM   #2
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,612
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: AU Falcon Power Steering hose replacement.

Unbolt it from the cross-member; I think they work like this: https://www.ebay.com.au/itm/POWER-ST...EAAOSwoTVdTKbT and https://www.ebay.com.au/itm/FORD-FAL...frcectupt=true
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 26-09-2020, 05:47 PM   #3
ToyotaCorolla
Regular Member
 
Join Date: Oct 2018
Posts: 36
Default Re: AU Falcon Power Steering hose replacement.


do you mean this nut?


I tried undoing that nut before, that the things does not split open :(
ToyotaCorolla is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 12-11-2020, 01:29 PM   #4
mad2
Regular...with metamusal
Donating Member2
 
Join Date: Oct 2009
Location: Geeeloong
Posts: 6,783
Default Re: AU Falcon Power Steering hose replacement.

Quote:
Originally Posted by ToyotaCorolla View Post
image
do you mean this nut?


I tried undoing that nut before, that the things does not split open :(
pretty sure the 'clamp' is similar (in design¿) to the hold down brackets used on the fuel/brake line which is mounted next sill? ubolt then use a medium flat screwdriver to open it up? . will admit it's been awhile since last one
mad2 is offline   Reply With Quote Multi-Quote with this Post
Old 26-09-2020, 06:24 PM   #5
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,612
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: AU Falcon Power Steering hose replacement.

The factory line assemblies do come with the clamp pre-fitted. So if they cannot come apart your options are:

a) try and buy a whole new line assembly from a Ford dealer;
b) buy a used line assembly from a wrecker etc; or
c) Use generic line clamps or even the older model ones that I linked.
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 26-09-2020, 06:26 PM   #6
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,612
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: AU Falcon Power Steering hose replacement.

The factory line assemblies do come with the clamp pre-fitted. So if they cannot come apart your options are:

a) try and buy a whole new line assembly from a Ford dealer;
b) buy a used line assembly from a wrecker etc; or
c) Use generic line clamps and isolators, or adel clamps (or the Supercheap equivalent https://www.supercheapauto.com.au/p/...80504#start=18 ) , or even the older model ones that I linked.
__________________
regards Blue

Last edited by aussiblue; 26-09-2020 at 06:33 PM.
aussiblue is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 26-09-2020, 06:46 PM   #7
ToyotaCorolla
Regular Member
 
Join Date: Oct 2018
Posts: 36
Default Re: AU Falcon Power Steering hose replacement.

Quote:
Originally Posted by aussiblue View Post
The factory line assemblies do come with the clamp pre-fitted. So if they cannot come apart your options are:

a) try and buy a whole new line assembly from a Ford dealer;
b) buy a used line assembly from a wrecker etc; or
c) Use generic line clamps and isolators, or adel clamps (or the Supercheap equivalent https://www.supercheapauto.com.au/p/...80504#start=18 ) , or even the older model ones that I linked.
is it possible for me to to just undo the line, put the new line now and tie if down with a thick cable tie?

Beg me to wonder why they make it so hard to change the damn thing!
ToyotaCorolla is offline   Reply With Quote Multi-Quote with this Post
Old 13-11-2020, 10:59 PM   #8
lumen8
FF.Com.Au Hardcore
 
lumen8's Avatar
 
Join Date: Oct 2020
Posts: 670
Default Re: AU Falcon Power Steering hose replacement.

Quote:
Originally Posted by ToyotaCorolla View Post
is it possible for me to to just undo the line, put the new line now and tie if down with a thick cable tie?

Beg me to wonder why they make it so hard to change the damn thing!
Try unbolting the clamp, then push the rubber block out of the metal frame of the clamp as you move the metal part of the clamp towards the rear of the vehicle, they are 2 seperate pieces.

Then the metal part of the clamp should be free to slide along the hoses, and if I remember right the rubber block then pulls off the hoses as it is a split design.

Then reverse the procedure to get it back on, and before you tighten the clamp bolt ensure the rubber block is sitting inside the metal cage correctly.
lumen8 is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 26-09-2020, 07:02 PM   #9
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,612
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: AU Falcon Power Steering hose replacement.

Quote:
is it possible for me to to just undo the line, put the new line now and tie if down with a thick cable tie?
Possible; but not recommended as you will likely end up in due course with a fractured line. In needs to be both held in place and isolated from vibration. Power steering hoses and thus the attached hard lines vibrate under pressure applied by the power steering pump.
__________________
regards Blue

Last edited by aussiblue; 26-09-2020 at 07:08 PM.
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 26-09-2020, 07:13 PM   #10
ToyotaCorolla
Regular Member
 
Join Date: Oct 2018
Posts: 36
Default Re: AU Falcon Power Steering hose replacement.

Quote:
Originally Posted by aussiblue View Post
Possible; but not recommended as you will likely end up in due course with a fractured line. In needs to be both held in place and isolated from vibration. Power steering hoses and thus the attached hard lines vibrate under pressure applied by the power steering pump.
what if i wrap the new hose in a bunch of old bike tyre rubber? I mean it soft and absorbs alot of vibration

On another question, why repco would sell the hose alone, if the factory ones comes with a clamp pre-fitted?
ToyotaCorolla is offline   Reply With Quote Multi-Quote with this Post
Old 26-09-2020, 07:32 PM   #11
XR Martin
FF.Com.Au Hardcore
 
XR Martin's Avatar
 
Join Date: Dec 2004
Location: Canberra Region
Posts: 9,056
Default Re: AU Falcon Power Steering hose replacement.

That clamp just clips together, if you saw it from underneath you would understand.
You basically have to crimp it closed real tight, and it will separate.
__________________
2016 FGX XR8 Sprint, 6speed manual, Kinetic Blue #170

2004 BA wagon RTV project.

1998 EL XR8, Auto, Hot Chilli Red

1993 ED XR6, 5speed, Polynesian Green. 1 of 329. Retired

1968 XT Falcon 500 wagon, 3 on the tree, 3.6L. Patina project.
XR Martin is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 26-09-2020, 07:38 PM   #12
ToyotaCorolla
Regular Member
 
Join Date: Oct 2018
Posts: 36
Default Re: AU Falcon Power Steering hose replacement.

Quote:
Originally Posted by XR Martin View Post
That clamp just clips together, if you saw it from underneath you would understand.
You basically have to crimp it closed real tight, and it will separate.
Do you mean I undo that bolt, squeeze the clamp very tight, and it will spit out the high pressure and return line?
ToyotaCorolla is offline   Reply With Quote Multi-Quote with this Post
Old 26-09-2020, 07:48 PM   #13
Tickford.
🚫⏰4️⃣🐃💩
 
Tickford.'s Avatar
 
Join Date: Sep 2012
Posts: 1,901
Default Re: AU Falcon Power Steering hose replacement.

Ford OE hose has a O-ring that fails and that is what causes the common leak. The O-ring is not replaceable. There's a USA made re-designed hose available where you can replace the O-ring if it starts to leak. Don't have to replace the entire hose assembly.

https://www.ultimatepowersteering.co...f%20the%20hose.
Tickford. is offline   Reply With Quote Multi-Quote with this Post
Old 26-09-2020, 07:52 PM   #14
ToyotaCorolla
Regular Member
 
Join Date: Oct 2018
Posts: 36
Default Re: AU Falcon Power Steering hose replacement.

Quote:
Originally Posted by Tickford. View Post
Ford OE hose has a O-ring that fails and that is what causes the common leak. The O-ring is not replaceable. There's a USA made re-designed hose available where you can replace the O-ring if it starts to leak. Don't have to replace the entire hose assembly.

https://www.ultimatepowersteering.co...f%20the%20hose.
Thanks for sharing, I already bought a new hose from Repco. Was trying to install the new hose today, but can't remove it from the line retainer!
ToyotaCorolla is offline   Reply With Quote Multi-Quote with this Post
Old 12-11-2020, 10:03 AM   #15
rangerdanger15
Starter Motor
 
rangerdanger15's Avatar
 
Join Date: Apr 2013
Location: Buronga, NSW
Posts: 10
Default Re: AU Falcon Power Steering hose replacement.

Quote:
Originally Posted by Tickford. View Post
Ford OE hose has a O-ring that fails and that is what causes the common leak. The O-ring is not replaceable. There's a USA made re-designed hose available where you can replace the O-ring if it starts to leak. Don't have to replace the entire hose assembly.

https://www.ultimatepowersteering.co...f%20the%20hose.
I took my hose to Enzed and they replaced the O rings, said there was no reason why they
Couldn’t...anyway, it is still leaking. So I’ll just need to buy a new hose from rep i or something?
rangerdanger15 is offline   Reply With Quote Multi-Quote with this Post
Old 12-11-2020, 10:14 AM   #16
Citroënbender
DIY Tragic
 
Citroënbender's Avatar
 
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,901
Chairman's Award: Chairman's Award - Issue reason: Your outstanding contributions to this community have not gone unnoticed. IN my view you are a worthy recipient of the (rarely used) Chairman's Award. 
Default Re: AU Falcon Power Steering hose replacement.

Non-VCT six? RSH-076 for the AU.
Citroënbender is offline   Reply With Quote Multi-Quote with this Post
Old 12-11-2020, 10:20 AM   #17
rangerdanger15
Starter Motor
 
rangerdanger15's Avatar
 
Join Date: Apr 2013
Location: Buronga, NSW
Posts: 10
Default Re: AU Falcon Power Steering hose replacement.

Quote:
Originally Posted by Citroënbender View Post
Non-VCT six? RSH-076 for the AU.
Were you replying to me?

If so, it’s a 6cyl 2000 forte.
rangerdanger15 is offline   Reply With Quote Multi-Quote with this Post
Old 12-11-2020, 11:45 AM   #18
Citroënbender
DIY Tragic
 
Citroënbender's Avatar
 
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,901
Chairman's Award: Chairman's Award - Issue reason: Your outstanding contributions to this community have not gone unnoticed. IN my view you are a worthy recipient of the (rarely used) Chairman's Award. 
Default Re: AU Falcon Power Steering hose replacement.

That’s your hose, then.
Citroënbender is offline   Reply With Quote Multi-Quote with this Post
Old 12-11-2020, 11:49 AM   #19
rangerdanger15
Starter Motor
 
rangerdanger15's Avatar
 
Join Date: Apr 2013
Location: Buronga, NSW
Posts: 10
Default Re: AU Falcon Power Steering hose replacement.

Quote:
Originally Posted by Citroënbender View Post
Non-VCT six? RSH-076 for the AU.
thanks, have you used it before? I'm just concerned about the two O rings that come with it, they look the same as the ones ENZED put in, but clearly they failed on me. I went to Bursons and they have one for $60 that looks the same as the repco one, but same deal with the O rings

I just dont feel great about spending the $$, putting it in just for it to leak again.

is there anything else that could cause it to leak from that fitting?

thanks
rangerdanger15 is offline   Reply With Quote Multi-Quote with this Post
Old 12-11-2020, 11:53 AM   #20
Citroënbender
DIY Tragic
 
Citroënbender's Avatar
 
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,901
Chairman's Award: Chairman's Award - Issue reason: Your outstanding contributions to this community have not gone unnoticed. IN my view you are a worthy recipient of the (rarely used) Chairman's Award. 
Default Re: AU Falcon Power Steering hose replacement.

The hose may be fractured at the seal flange. There might be damage to the seal seat in the housing. The clamping thread could be faulty; crossed or stripped. The pump body could even be cracked or slightly porous.

If in doubt, clean all bits meticulously and look for oil stains creeping.

My AU ute has this hose fitted, probably ten years old now.
Citroënbender is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:26 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL