|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
10-01-2007, 03:18 PM | #1 | ||
Regular Member
Join Date: Aug 2006
Posts: 72
|
Gday all
Question regarding my grandfathers 1972 esky. Apart from the rest of the problems I am slowly rectifying, the brake pedal feels loose on the pivot bar. If you follow what I mean. There is a single bar which holds the brake, accellerator and clutch pedals (from memory). They are all on bushes, but the brake pedal has excessive side to side movement which leads me to believe the bush is worn. So, anyone experienced this, and any ideas where to get the parts to fix it? also anyone with a brake booster dead or alive lying around? Cheers BRad |
||
10-01-2007, 04:48 PM | #2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
if the pin and pedal parts are worn they should be replaced
if not to serious ... felt washers or flat washers from the plumbing and hard ware dept --- might take up the side to side movement
__________________
My car goes Brumm Brumm |
||
10-01-2007, 05:12 PM | #3 | ||
Regular Member
Join Date: Aug 2006
Posts: 72
|
Ok thanks. So to replace, I guess second hand is the only way to go, hey?
|
||