Exhaust and Dyno

UU TS50 · 13-10-2009, 10:45 PM

Got a Manta 2 1/2 cat back system fitted up behind the pacemaker 4-1s n high flow cats.
Got before and after dyno runs and it came back with an extra 10hp at the wheels

:

now new clutch tommorrow the hopefully the Drags on Friday night

FreddyDUZ747 · 13-10-2009, 10:55 PM

Bargain.Power everywhere and sooner.

RG · 14-10-2009, 11:28 AM

Noice, those Manta systems sound very very nice.

CRAIGAU3220 · 14-10-2009, 03:44 PM

Damn you John, haha. Now you will have to change your sig....201.5 rwkw

See you Friday.

UU TS50 · 14-10-2009, 09:20 PM

Quote:

Originally Posted by CRAIGAU3220

Damn you John, haha. Now you will have to change your sig....201.5 rwkw

See you Friday.

May be not friday as got problems with the clutch that was goin into it today
Kit was in my mechanics sons turbo E series XR8 for about 1000k but went through three gearboxes but when installed in my car there was a bad vibration so a new kit and lightened flywheel is on its way but flywheel wont be here until friday morning

:

CRAIGAU3220 · 14-10-2009, 10:29 PM

Hey John, I see you changed your sig.

I'm not 100% on Friday just yet myself, Have been really busy at work so may not be too enthusiastic come Friday arvo, What brand clutch/flywheel did you get ?

**SSD-85** · 14-10-2009, 10:35 PM

Very nice, makes me want to take mine to dyno just to see what its like.

UU TS50 · 14-10-2009, 10:46 PM

Quote:

Originally Posted by CRAIGAU3220

Hey John, I see you changed your sig.

I'm not 100% on Friday just yet myself, Have been really busy at work so may not be too enthusiastic come Friday arvo, What brand clutch/flywheel did you get ?

its going to be an xtreme unit
thats about as much as i know at this stage

UU TS50 · 14-10-2009, 10:47 PM

Quote:

Originally Posted by Scotty85

Very nice, makes me want to take mine to dyno just to see what its like.

its good to know were you are starting from
if you are planning any mods

**SSD-85** · 14-10-2009, 10:58 PM

Quote:

Originally Posted by Congo XR8

its good to know were you are starting from
if you are planning any mods

Trouble is, ive already put on the exhaust system :( . But just seeing where its at now would give me some clue, hopefully its not terrible.

xr8ute · 15-10-2009, 09:53 PM

Nice work, thats good power. Keen to hear how things go for you at the track.

5L std stroke Windsors FTW!

XRCIST · 15-10-2009, 11:57 PM

Thats a nice gain there John, what system were you running before hand?

UU TS50 · 16-10-2009, 12:10 AM

Quote:

Originally Posted by XRCIST

Thats a nice gain there John, what system were you running before hand?

was on the car when i got it
2 1/4 press bent system with no resonators
looks like will have to wait till next wednesday before i get back
to the strip

XRCIST · 16-10-2009, 12:49 AM

I had a twin 2 1/4" on mine before i changed to twin 2.5s. Much more pickup from 3500rpm+ but i did lose a little bit of bottom end grunt, mainly under 2000rpm. Did you notice any loss down low?

UU TS50 · 16-10-2009, 12:53 AM

havnt had a chance to drive it yet
it went in for the clutch yesterday should
have it back tomorrow

XRCIST · 16-10-2009, 01:00 AM

Sounds good, il be keen to hear how it goes. Good luck at the track too, hopefully you can snick a 13.4

:

UU TS50 · 15-11-2009, 11:11 PM

Quote:

Originally Posted by XRCIST

Sounds good, il be keen to hear how it goes. Good luck at the track too, hopefully you can snick a 13.4

:

Finally got back to the Motorplex with mixed results from my driving
new clutch and flywheel made it different to drive with the revs climbing faster it caught me out on the first run and went to 6000rpm normal change about 5000rpm ran a 14.3??

:
was much the same through the night and ran best of 14.299 on the last run so i dont know where my 13s have gone to ???

Only thing i can think is that i was goin regularly last yr and the computor responded to that but now we have had a lay off it has gone back to normal ??

Maybe its time for a real tune now hey

On a side note it is awsome to drive on the road feels very responsive and i think it sounds awsome :eclipsee_

XRCIST · 16-11-2009, 01:36 AM

Thats ok, dont get too hung up on the times, did you run the 13.6 in cooler weather? What was your mph?

13.6 is a cracker of a time though with no tune, very impressive.

CRAIGAU3220 · 16-11-2009, 01:37 AM

Thats a bumma regards to your 1/4mile times, are your 60 footers the same as before?

Good to hear that your happy with the new clutch and flywheel, is it a organic disk and did you get the aluminium flywheel (same as me)

UU TS50 · 16-11-2009, 08:59 AM

yes the weather was warmer and the altitube density was at 450-500metres were as fastest times were at 80-100 metres ? mph was 99.15 compared to 101s last yr even managed a 13.7@103mph last yr

couldnt tell you what the clutch is Craig but will go past and find out all i know about the flywheel is that it was lightened and from extreme so it could be alloy?

60 footers were all around 2.3 compared to 2.04 i think for my fastest time last yr?

The Monty · 16-11-2009, 09:11 AM

Well thats where youve lost your time. Every .1 at the 60 is .2 at the end, so you should be around .6 of a second of your PB. Add in the warmer weather and thats where the .7 of a second went.

CRAIGAU3220 · 16-11-2009, 05:29 PM

Quote:

Originally Posted by The Monty

Well thats where youve lost your time. Every .1 at the 60 is .2 at the end, so you should be around .6 of a second of your PB. Add in the warmer weather and thats where the .7 of a second went.

Spot on Monty.... Try harder John !!!!!

The Monty · 16-11-2009, 06:05 PM

Only thing that I think would make it that much slower off the line, even though its making more power would be if the clutch was slipping a little bit. Do you use slicks at all?

**Stav** · 17-11-2009, 08:03 PM

Hmm with a tune you should see 10 to 15% increase in real world power and increased torque.. Fair power increase on dyno but a little on the lower side.

madmelon · 18-11-2009, 10:38 AM

Quote:

Originally Posted by Congo XR8

yes the weather was warmer and the altitube density was at 450-500metres were as fastest times were at 80-100 metres ? mph was 99.15 compared to 101s last yr even managed a 13.7@103mph last yr

couldnt tell you what the clutch is Craig but will go past and find out all i know about the flywheel is that it was lightened and from extreme so it could be alloy?

60 footers were all around 2.3 compared to 2.04 i think for my fastest time last yr?

You may find that that drastic difference is purely down to the lighter flywheel. I've seen on a flywheel/clutch website somewhere that drag cars favour a heavier than stock flywheel for the launch for some reason - can't remember why. Probably less chance of bogging down. I'll see if I can find the website.

madmelon · 18-11-2009, 10:42 AM

here we go...

http://www.xtremeclutch.com.au/page....6&productid=23

5 FTR 5 · 18-11-2009, 11:51 PM

I had the light weight fly with the extreme ceramic clutch and mine didn't feel the best to launch, after seeing how you went I put the skimmed old fly back and a organic clutch and it went much harder.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode