|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
19-08-2008, 10:49 PM
|
#1 | ||
|
Regular Member
Join Date: Dec 2005
Location: Victoria!
Posts: 348
|
Hi guys, ive got an issue that is starting to drive me crazy. All 4 of my doors have been rattling like hell lately when I go over the slightest of bumps. Being a panel beater by trade, Ive been over many many different thoughts and theories on this, and nothing seems to want to fix it, including a new full set of door and turret rubbers. Any ideas and thought and massively appreciated. Thanks in advance.
|
||
|
|
|
19-08-2008, 11:02 PM
|
#2 | ||
|
krunch krunch hsv 4 lunch
Join Date: Apr 2005
Location: hangin with Chopper at Bojangles
Posts: 1,100
|
Are these rattles the doors clanging away or the seals rubbing away on each other?
My XR8 use to do the same thing - seals creaking etc which meant there was a slight movement in the doors. I sprayed an old rag with silicon spray and wiped down both sides to the door sills and the silence is golden. |
||
|
|
|
|
20-08-2008, 11:54 PM
|
#3 | ||
|
Donating Member
 Join Date: Dec 2006
Posts: 5,556
|
Open the doors and lift them up from the ends, see if thats the noise
If you can feel movement, the hinge pins are stuffed, no fix, need new ones there is a plastic piece in the middle that wears out. Assuming all hinge bolts are tight naturally, they can come loose also. This happens to my taxis regularly Another option is to realign the door catch on the B pillar to hold the door tighter, just loosen torx and move or hit it in the required direction, this will work for a while only but |
||
|
|
|
|
21-08-2008, 09:04 AM
|
#4 | ||
|
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
Jastel and ratman speak the truth
i had an awful rattle from the drivers door until i realised that all three torx screws were loose on the door catch so i tightened them up and hey presto! silence! just remember, duct tape is silver, silence is golden.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
|
|
|
|
21-08-2008, 10:16 AM
|
#5 | |||
|
Sales Representative
Join Date: Mar 2007
Location: Young
Posts: 5,314
|
Quote:
 As for the door info... i'll be using that myself when it comes to re-fixing the doors...
__________________
Project InfernoSR - Back Burner Project FeralTerra - No longer Project Fairmont Prodigy - Sold Thanks go to: MY WIFE! Bathurst Brakepro Undacar eBay!! |
|||
|
|
|
|
02-09-2008, 12:53 PM
|
#6 | |||
|
Parts bin special
Join Date: Mar 2005
Location: Narre Warren, Vic
Posts: 8,276
|
Quote:
__________________
Weekender 1964 US Falcon Futura convertible - Rangoon Red 260 Windsor V8, 4 speed manual, LHD, Electronic ignition, Mustang wheels https://fordforums.com.au/showthread.php?t=11470868 Daily 2014 SZII Territory diesel - basic runabout Previous Cars 1990 EAII Fairmont Ghia - Tickford engine, 5 speed, SVO wheels, bodykit, much more 2000 AUII Fairmont - XR wheels, Ghia interior 2010 FG XR50T ute - XR8 bonnet, Streetfighter intake |
|||
|
|
|
02-09-2008, 01:13 PM
|
#7 | ||
|
LOW AND SLOW
Join Date: Sep 2006
Location: Geelong.
Posts: 2,644
|
ratman has the right idea. My AU had this same problem and i sprayed the seals with silicon spray and it worked a treat.
Also as Mr Hardware mentioned, check the torx bolts on the driver's side door catch. Mine were all loose also. Adam.
__________________
"Any Color You Like As Long As It's Black, Matt Black, With Flames, And A Bit Of Pinstriping". |
||
|
|
|
|
02-09-2008, 05:54 PM
|
#8 | ||
|
Regular Member
Join Date: Dec 2005
Location: Victoria!
Posts: 348
|
Checked all of the above, all are good. Its the doors themselves that rattle on thel ocks. They are adjusted right in, and at the moment, the door catch is right up holding the weight of the door, and it still has the rattles.
|
||
|
|
|
Rattling doors
Linear Mode
