AU With BA Interior

xrford · 12-12-2008, 05:40 PM

Hi Just wondering if anyone has put a BA interior into a AU?
I have a AU wagon with a TE50 interior at the moment, the back seat was the only thing that had to be played with, but i was wondering if the BA interior would fit in without the headaches??
If so how easy does it go, im not so worried about the front seat tracks, but how does the back seat line up? and will the door trims fit in the front and back as they are the same shape doors but not sure if there is issues with the different shape dashboard??

Any Info appreciated cheers.

low au classic · 12-12-2008, 05:48 PM

http://www.aufalcon.com/cgi-bin/inde...ates=1#updates this guy has the door trims done here is a link hope it helps

aye you · 12-12-2008, 10:05 PM

Cam.Giles on here is doing it, slowly. has the door trims sorted

fourl6 · 12-12-2008, 10:43 PM

:( slowly... i can afford the cobras now nick :-D still saving for the tyres tho :-(

um check out this thread... iv only seen one with the interior... but no proof that its working etc.

http://www.fordforums.com.au/showthread.php?t=11209850

aye you · 12-12-2008, 11:58 PM

pfffft you've been saying that for ages buddy

Nostalgia · 13-12-2008, 07:16 AM

Anything is possible. EA2BA had a BA interior in his EA.
With mods it can be done.

5LGhiaWgn · 21-12-2008, 02:26 PM

I have the fronts in just going to retrim the rears and door inserts in BA trim

trimmaster · 21-12-2008, 02:38 PM

rear seat base is totally different

XR82GO · 21-12-2008, 04:18 PM

here are mine...i got the car with these done and from what i have been told they are BA seats with AU frames...and they are great

lotus · 21-12-2008, 04:23 PM

Quote:

Originally Posted by 5LGhiaWgn

I have the fronts in just going to retrim the rears and door inserts in BA trim

What had to be done to fit the front seats in??

**Uncle_Ken** · 21-12-2008, 04:24 PM

Quote:

Originally Posted by 5LGhiaWgn

I have the fronts in just going to retrim the rears and door inserts in BA trim

How did you get the BA seats to fit. I thought AU's had different rails?
UK

dreadly · 21-12-2008, 05:15 PM

If ya do? ill buy the front te seats and door cards ;) for my ute

5LGhiaWgn · 21-12-2008, 05:35 PM

Quote:

Originally Posted by Uncle_Ken

How did you get the BA seats to fit. I thought AU's had different rails?
UK

I made hybrid rails a mix of AU and BA rails to make them go in, Welding and grinding is needed.

Quote:

Originally Posted by trimmaster

rear seat base is totally different

yeah i mean custom triming the au rear in BA XR red/black cloth and where the black trim is im going leather going to do the same and replace the black in the front with leather

waggaclint · 22-12-2008, 07:52 PM

Quote:

Originally Posted by 5LGhiaWgn

I have the fronts in just going to retrim the rears and door inserts in BA trim

have you got power set-up working on the drivers side....

5LGhiaWgn · 22-12-2008, 07:59 PM

Quote:

Originally Posted by waggaclint

have you got power set-up working on the drivers side....

I did have just need to check the connections again as after i got it back from respray its not working now its most likley disconnected its not hard to wire up from memory.

MILD67 · 22-12-2008, 09:39 PM

Quote:

here are mine...i got the car with these done and from what i have been told they are BA seats with AU frames...and they are great

__________________

they are tickford seats, i thought tickford stopped after AU?
and BA is FPV?

XR82GO · 22-12-2008, 11:39 PM

it is an AU...look at the dash

Gonz · 26-12-2008, 02:04 AM

i also had the BA front seat moulds put onto the Au frames in my last ute.

how did you go with the air bag sensor under the seat when fitting the B series seats in the AU?

Gonz.