|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-02-2009, 12:22 PM
|
#1 | ||
|
Regular Member
Join Date: Feb 2006
Posts: 394
|
Hello All,
can someone give me the steps required to fit the XR50 side skirts? Cheers |
||
|
|
|
15-02-2009, 12:45 PM
|
#2 | ||
|
Regular Member
Join Date: Feb 2006
Posts: 394
|
So far I have figured out
1. Remove the plastic clips holding the inner wheel guard on 2. remove the rubber strip along the door sills 3. Slide skirt on to sill 4. line up the front and rear of skirt against the body 5. Secure skirt in wheel well using self tapping screws 6. Replace plastic clips removed at step 1 7. Replace rubber strip removed at step 2 Do you have so secure the underside of the skirt under the car to anything? |
||
|
|
|
|
15-02-2009, 01:00 PM
|
#3 | ||
|
Audi S3
Join Date: May 2005
Location: Sydney.
Posts: 8,307
|
i just sikaflex'd my au2 xr skirts on with the scrivets at the front and a self tapper in the rear wheel arch.
__________________
|
||
|
|
|
Fitting XR50 side skirts
Linear Mode
