|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
24-11-2009, 07:13 PM
|
#1 | ||
|
Regular Member
Join Date: Mar 2005
Posts: 92
|
Hey guys,
Does anyone have the tutorial that was on AUFalcon.com previously regarding how to remove the bumper? JC made two references to it but it isn't there.. I assume it was lost when the site got upgraded. Those things on the plastic guard liner, are they like clips or screws? Thanks again |
||
|
|
|
24-11-2009, 08:12 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
ok, you have to remove your head lights, as there is a screw or bolt holding the bumper on under them, you then pull the plastic guards off in the wheel arch, just get a screw driver , slip it under the plastic and yank the plastic screws off, and if you have the plastic stone guard under the car as well you have to remove that also as there is plastic screws the same in the inner guards holding it on also
hopes this helps cheers
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
|
|
|
|
24-11-2009, 09:30 PM
|
#3 | ||
|
Banned
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
|
They are push in clips - usually called xmas trees. Prise them out with screwdriver or cut them off with side-cutters. They are cheap to replace. Places like Repco have them if you don't want to pay Ford prices.
|
||
|
|
|
|
27-11-2009, 06:46 PM
|
#4 | ||
|
AU Falcon Man
Join Date: Jun 2007
Location: Gippsland
Posts: 928
|
im pretty sure you dont have to remove the headlight... i thought you have to remove the front bar to get the headlights our... (because the bar overlaps the bottom of the headlights...) as far as i remember all you have to do is get to the 2 nuts at either side wheel arch (that you have to move the wheel arch guard to get to, move not completely remove)
Cheers Cam
__________________
2015 SZ MkII Ford Territory TS Aero Blue, RWD Petrol, Standard Sat Nav. 2013 TF Ford Kuga Ambiente Panther Black, AWD, 6 Speed Auto, 1.6lt ecoBoost Turbo Petrol. Was 2012 FG Mk2 Ford Falcon XR6 Swift Green,6 Speed Auto, Stock... 2001 AUIII Ford Falcon Forte Genuine T2 TS50 bodykit, 18" BF Cobras, Boge and Eibach Suspension and Complete AU2 Fairmont Ghia Interior 1994 EF Ford Fairmont Gun Metal Grey, Lumpy Straight 6 |
||
|
|
|
|
27-11-2009, 08:23 PM
|
#5 | ||
|
FF.Com.Au Hardcore
 
Join Date: Nov 2007
Location: Riff
Posts: 12,422
|
^^ exactly. thats how i changed mine.
__________________
FGII XR6 IN LIGHTNING STRIKE R52 SIII IN GUN METALLIC |
||
|
|
|
|
27-11-2009, 09:25 PM
|
#6 | ||
|
Banned
Join Date: Jan 2007
Location: Mount Gambier - South Aus
Posts: 662
|
wrong wrong wrong frd906... have some lunch...
 ...T3man, for further refrance, they are called scrivits... alltho there are 2 of the x-mas tree clips... AU bar is easy... 2x 13mm bolts both sides behind the splash shield... a rot of umm 7 or 8mm bolts under the bar... and bobs ya uncle... its a 5 min job not even... Don't bother trying to take lights out with bar on = fail and putting parts under stress... |
||
|
|
|
|
27-11-2009, 10:37 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
wtf, you go have some lunch mate,
you have the stone gaurd underneath which is connect to the bottom of the bar, also the wheel arch plastic, they have to come out and 2 bolts on either side in the wheel arch, simple mate
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
|
|
|
|
27-11-2009, 10:38 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
obvisouly mate you done have the plastic stone gaurd underneath skotty
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
|
|
|
|
27-11-2009, 10:58 PM
|
#9 | ||
|
Regular Member
Join Date: Mar 2005
Posts: 92
|
Yeah you don't have to remove the headlights to remove the bar. But otherwise frd906's instructions are pretty much spot on.
My front bar is drooping excessively though, and luckily I can take the headlights out easily anyway. That was the main reason why I wanted to take the bumper off. |
||
|
|
|
|
27-11-2009, 11:03 PM
|
#10 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
my instructions were right then, if you mentioned that you were taking the head lights out i was right,
becuase i have done the same thing as well
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
|
|
|
|
28-11-2009, 12:57 AM
|
#11 | |||
|
Banned
Join Date: Jan 2007
Location: Mount Gambier - South Aus
Posts: 662
|
Quote:
 : : 
|
|||
|
|
|
|
06-12-2009, 07:52 PM
|
#12 | ||
|
First Ford Owner
Join Date: Jul 2008
Location: Brisbane northside
Posts: 72
|
a average AU owner would no longer have a stone guard as the bastards keep breaking!
(if you dont have one..) only need to undo the wheel arch guards and undo the bolts as im under my car to often the stone guard just gets in the way so i've kept it off!!
__________________
If you dont like the heat, then get out of the bloody fire |
||
|
|
|
|
06-12-2009, 09:44 PM
|
#13 | ||
|
Critical Thinker
Join Date: Jan 2005
Location: Adelaide
Posts: 20,409
|
I will eventually need to remove my front bar soon for some minor mods. I might get you to give me a hand Skotty when the time comes.
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist" 2022 Mazda CX5 GTSP Turbo 2018 Hyundai Santa Fe Highlander 1967 XR FALCON 500 Cars previously owned: 2021 Subaru Outback Sport 2018 Subaru XV-S 2012 Subaru Forester X 2007 Subaru Liberty GT 2001 AU2 75th Anniversary Futura 2001 Subaru GX wagon 1991 EB XR8 1977 XC Fairmont 1990 EA S Pak 1984 XE S Pak 1982 ZJ Fairlane 1983 XE Fairmont 1989 EA Falcon 1984 Datsun Bluebird Wagon 1975 Honda Civic |
||
|
|
|
Removing front bumper
Linear Mode
