|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
18-12-2024, 08:38 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Jun 2011
Location: Pt Lincoln far side South Oz
Posts: 5,933
|
2 years ago I got a Supercheap bottle jack, used it a few times then stored it (on its side?) since then it appears to be a lot slower at pumping up.
Could it be my immagination or has it leaked if so course of remedial action
__________________
Dont p i s s off older people. At our age the term Life in Prison is not a deterrent |
||
18-12-2024, 09:09 PM | #2 | ||
Brodes
Join Date: Jul 2009
Location: Adelaide SA
Posts: 934
|
Bin it and buy a reliable jack.
Sent from my Pixel 6 Pro using Tapatalk
__________________
FGMkII XR6T, XB GT, XB Fairmont being built (slowly) & a 2013 Kia Rondo,GH Sigma |
||
18-12-2024, 09:29 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Canberra Region
Posts: 9,056
|
Find a Hilux or Prado bottle jack.
Non hydraulic, will last forever.
__________________
2016 FGX XR8 Sprint, 6speed manual, Kinetic Blue #170 2004 BA wagon RTV project. 1998 EL XR8, Auto, Hot Chilli Red 1993 ED XR6, 5speed, Polynesian Green. 1 of 329. Retired 1968 XT Falcon 500 wagon, 3 on the tree, 3.6L. Patina project. |
||
This user likes this post: |
18-12-2024, 10:01 PM | #4 | ||
Experienced Member
Join Date: Sep 2006
Location: Australasia
Posts: 7,756
|
Would not be the first time I've lost oil in a bottle jack, just top it up with hydraulic oil, here is some instructions to help you.
https://www.supercheapauto.com.au/on...bi9lZpRjkqTzDE |
||
18-12-2024, 10:07 PM | #5 | ||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,815
|
This - don't faff about with stuff that lifts up the car, if you have any doubts bin and buy a new one, you don't want to be jacking up the car and then it comes down at a rate of knots unexpectedly.
|
||
19-12-2024, 01:58 AM | #6 | ||
FF.Com.Au Hardcore
Join Date: Oct 2016
Posts: 880
|
hi
air leaking in or fluid leaking out or both |
||
19-12-2024, 04:06 PM | #7 | ||
FF.Com.Au Hardcore
Join Date: Feb 2008
Location: Geelong, Victoria
Posts: 4,502
|
Pump it right up and squeeze/bleed it right down a few times, might come good if it didn't lose any fluid and seals are still good. Just because its cheap doesn't mean its not reliable, of course you wouldn't work on a car balancing on only a bottle jack. A good test of the seals is to put full weight of the car on jack and see if it leaks down over the hours.
|
||
This user likes this post: |
19-12-2024, 04:21 PM | #8 | ||
FF.Com.Au Hardcore
Join Date: Jun 2011
Location: Pt Lincoln far side South Oz
Posts: 5,933
|
local wrecker had a Prado one $40 tske that as a win.
__________________
Dont p i s s off older people. At our age the term Life in Prison is not a deterrent |
||
20-12-2024, 06:53 PM | #9 | ||
Regular Member
Join Date: Sep 2017
Posts: 264
|
If there is a small rubber bung on the body of the jack then that is the oil level with the jack collapsed. Take it out, fill with hydraulic oil till it starts to weep out of the hole, replace the bung.
|
||