|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
12-01-2021, 10:48 AM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2019
Posts: 4
|
Hello brains trust
Long time lurker, first time poster �� Recently had my coil pack turn up its toes and die. My dash cluster had weird characters showing up on the digital display. Have replaced with brand new coil pack and digital display works properly again. However, my temperature gauge and RPM display are now exhibiting weird behaviour. The temperature gauge needle starts as normal and then very quickly goes all the way around beyond hot (it's not overheating), and the RPM needle heads all the way around beyond the readout and touches the raised part of the cluster. I have tried a known good dash with significantly higher km's and both the temperature, and RPM's work as normal (RPM's are probably a tad low at idle but that may just be the older dash cluster). Penny for your thoughts... https://www.dropbox.com/s/tnbm31p7ry...94843.mp4?dl=0 Can I reset the dash? Or can I send it away to get fixed? TIA Matthew |
||
|
|
| Thread Tools | |
| Display Modes | |
|
|
AU3 weird instrument cluster behaviour
Threaded Mode