Smarlock remote reprogramming

[loxxr6]

I purchased a new remote but the instructions I was given on how to reprogram the remotes isn't working.

Can anyone tell me if this is right (au1).

INSERT KEY INTO THE IGNITION SWITCH AND TURN TO ACCESSORY POSITION.

PUSH THE REAR DEMISTER/DEFOGGER BUTTON ON THE DASHBOARD,
THREE TIMES WITHIN FIVE (5) SECONDS,
LIKE PRESSING A DOORBELL, ON EACH PRESS.

WHAT SHOULD THEN HAPPEN, IS ALL DOORS WILL LOCK,
(THIS IS THE BEGINNING OF THE REPROGRAMMING PROCESS,)
NOW WAIT (10) TEN SECONDS OR SO.

NOW, PRESS THE DOOR BUTTON ON EACH OF THE KEYPADS INDIVIDUALLY,
THAT HAVE BEEN SET FOR REPROGRAMMING,
EACH PRESS SHOULD UNLOCK THE DOORS AND AUTOMAGICALLY RELOCK THEM.

ONCE ALL KEYPADS HAVE BEEN TESTED AND ARE OPERATIONAL TO THE NEW SETTING, TURN THE IGNITION KEY TO THE OFF POSITION AND REMOVE THE KEY,
ALL DOORS WILL THEN UNLOCK WITH THIS ACTION.