|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
11-05-2008, 01:25 PM | #1 | ||
Starter Motor
Join Date: Jul 2005
Posts: 6
|
hey guys and gals, stuck with a bit of a dilemma here... I am trying to a change my fuel filter on my AU II Ghia I6 and can't seem to get the nuts on both ends off, I have tried wd40 and a bit of elbow grease but so far nothing. There are two nuts on both ends, one is large and one is small, if somebody could hint which one to yank that would be great, The pic is below. Also in the packet there is 4 "0" rings two are small brass ones and two are larger rubber ones, which order do they fit onto the end : cheers!
|
||