|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
25-11-2008, 09:20 PM
|
#1 | ||
|
true blue
Join Date: Sep 2006
Posts: 34
|
I did start a thread before 'AUII – Auto trans problem???', thank you for the help and advise given, but my problem is that I'm almost done with the rebuild of the tranny, and I can't really say: "that was the problem".
Besides very fine shavings from 2 bearings, those have been replaced, and a few friction plates that were not so great anymore, there is nothing else I can see wrong. All frictions plates have been replaced so are all the o-rings, gaskets and seals. Checked clearances, all within spec. Oil-pump looks new, so what else could it be that I had no foreward drive before? The only thing that I have not checked is the valve-body. Besides the "evil" that might be inside there, does somebody has an idea why I had no foreward drive? Before I removed and stripped the box, a test was done to all the solenoids, they were clean, no error codes. |
||
|
|
Who knows?
Threaded Mode