|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
06-07-2015, 09:20 PM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2011
Posts: 17
|
Hi guys,
I have just bleed my brakes I was advised to do the following. - Undo all four bleeding screws pump the pedal drain all the fluid. - refit the bleeding screws. - top up the brake fluid. - unscrew the bleeder one at a time. Loosen the screw push the pedal down hold it down tighten the screw and then release the pedal. Repeat this until you have a continues flow. I have done this but only the drivers side front wheel and rear passenger side is working the pedal is extremely spongy and the other two wheels will not bleed or pull fluid???  Your help would be greatly appreciated. |
||
|
|
Bleeding brakes need urgent assistance
Threaded Mode