Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Ford Forums Central > Site Support

Site Support If something isn't working or you have a suggestion ( a nice one !! ) let us know here.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 17-10-2017, 10:21 AM   #1
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 107,290
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default ** IMPORTANT - EOL for TLSv1**

Good morning all. Apologies for the technical detail below but it is important that Windows XP and Windows 7 users read the information below as it will impact access to the forum.

As some will know, we moved to using SSL on the server some months ago which is why you will see a little padlock symbol in your browser navigator bar. There are several variations on the SSL protocol and at the time of implementation, the only one we disallowed was the (hacked) SSLv2.

It is now time that we started to implement some of the more up to date (and secure) protocols and remove the older ones as some of them are vulnerable to attack. To this end, we are planning to remove support for TLSv1 and SSL3 effective from the 1st November this year.

The table below, identifies which Microsoft Operating System version have inbuilt support for TLSv1.1 which will be the lowest SSL version supported once we make the change.



As you will see Windows XP does not have support for TLSv1.1 and this has two potential impacts:

1. People using Internet Explorer 6 will not be able to access AFF; and
2. People using other browsers may receive errors trying to access the site.

Windows 7 does support TLSv1.1 but it is not enabled by default and in order to use it the following steps need to be taken regardless of which browser you normally use.

Launch Internet Explorer and navigate to Tools -> Internet Options -> Advanced. Under the Security section, you will see a list of SSL protocols supported by the Operating System and you will notice that a number of them are not ticked. Make sure that they are set as per the screen shot below.




Save the settings and then your normal browser should work fine with AFF post the November change.

To check SSL settings in Google Chrome:
  • Click the Chrome menu button.
  • Click Settings.
  • Click Show advanced settings.
  • Click Change proxy settings under the Network section.
  • Click the Advanced tab.
  • Check or uncheck the options for Use SSL as per the IE screen shot above.
  • Close the Settings tab.

To set SSL in Firefox:

In Firefox you can check the minimum and maximum supported versions of TLS as follows:
In a new tab, type or paste about: config in the address bar and press Enter. Click the button promising to be careful.

In the Search box above the list, type or paste tls and pause while the list is filtered

To disable SSL3 and require TLS of a late enough version, double-click security.tls.version.min and enter the desired value:
  • 0 = SSL 3.0 okay
  • 1 = at least TLS 1.0
  • 2 = at least TLS 1.1 **this setting will be required for AFF**
To set the highest version, double-click security.tls.version.max and enter the desired value:
  • 0 = up to SSL 3.0
  • 1 = up to TLS 1.0
  • 2 = up to TLS 1.1 **at least this**
  • 3 = up to TLS 1.2
  • 4 = up to TLS 1.3


To set SSL config in Opera

Opera

Opera versions greater than 12 disable SSL3 by default, or alternatively, you may change the configuration of your browser as follows:
  1. Press Ctrl + F12.
  2. Click on “Advanced” tab.
  3. Click on “Security” on the left menu
  4. Click on “Security protocols”
  5. Uncheck “Enable SSL 3”
  6. Click “OK”


There are some other combinations that are known to have problems as they don't fully support the protocols being used. The table below identifies those that we know about and if you have one of those combinations then a browser is all that is required.





Best regards
Russ
__________________

__________________________________________________

Observatio Facta Rotae



Last edited by russellw; 17-10-2017 at 12:47 PM.
russellw is offline   Reply With Quote Multi-Quote with this Post
8 users like this post:
 


Forum Jump


All times are GMT +11. The time now is 05:00 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL