|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
22-11-2021, 05:46 PM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2013
Posts: 28
|
G'day , Have just acquired another 99 WF 1300 Festiva in pretty clean condition for its age and only 128000 on the clock .. Unfortunately it has a blown head gasket from the previous owner over heating it twice .. The car still starts easy but if left running will heat up pretty quick . Has the lovely caramel oil in the water overflow bottle and from where the thermostat unbolts .. There is no water in the sump oil or in the cylinders .. So from here I believe it is the gasket blown in one of the gallery's so oil is pushing into a water gallery , does that sound right ?
Has anyone changed a head Gasket on a 1300 before , as I need to get the Torque measurements and sequence to do up the head bolts when I attempt to start the replacement ? Any recommendation for which Quality Head Gasket set to use as there is few kit's on Ebay and other sites in Australia ,any info would be much appreciated .. Cheers Fred https://www.ebay.com.au/sch/i.html?_...item3ac3d79800 Last edited by Froger; 22-11-2021 at 05:48 PM. Reason: Adding link to Ebay.. |
||
|
|
Festiva Blown Head Gasket
Threaded Mode