|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
|
|
Thread Tools | Display Modes |
17-05-2006, 02:12 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: May 2005
Location: In my shed
Posts: 5,066
|
Just like to give the guys there a big thumbs up for their help yesterday.
A few weeks ago i bought an actuator for the XR, they did'nt have an AU one, so they gave me one from a BA. After removing the old one and fitting the replacement, everything worked fine except it would not open from inside, so after removing and refitting it a few times i gave up, could not work out why. After sending a P.M they said to bring it in and they would swap it over. I was over that way yesterday with the car and called in, Michael who works there offered to take it off and find out why. After around 1/2 of comparing others that did the same thing, he went and got a release cable from an AU, tried that and it finally worked. What the problem was, the BA release cable is approx 2mm longer than the AU cable, something that was not easily noticeable, so in turn not allowing the door catch to fully release. So a big thank-you to Michael for patiently trying and finally nutting out the problem. |
||
|
|
Thanks FTG Auto Salvage.
Threaded Mode