ultra lows + koni yellows

[eXi7w0unD]

im up to the stage where my next mod is lowering..

iv made my desion and im after ultra lows

does any 1 know a good place in brisbane that will do this with koni's?

i got 20" so i will need them to roll the guards.

cheers

[bonk182]

Not sure mate, i wont be able to hep you much... not even sure if you'll consider what im going to say, but ill say it anyway as a piece of constructive criticism. I think youll regret ultras on 20s even with konis. your probably running a tyre profile of 35 - so your ride will suffer so badly!

Just my 2cents
good luck.

James

[mattp]

City Suspension in Underwood does a good job, and Greg there will look after you. The only thing is he's a bit of an old man about ride height, he doesn't like cars to be too low, so you might have to talk to him and see what he says he might not want to do it. Decent bloke though, he's looked after me in the past. The number is 3808-3266.

[FTE217]

I run 20's on the T3, Koni's come std.
Considering the T3 comes with a bulky body kit and lowered from factory I have not needed to go lower.

Do you need to get the gaurds rolled ?
At the front definately, rears should be fine.

Ride quality ? OK she doesn't ride like when on the std 18's but many many ppl when in the car comment how good she rides considering the set up.

[eXi7w0unD]

i will need to roll the front guards and my car has the awc ts50 kit on it. thansk for the feedback, but my ride already suffers cus of 20" rims my dying shocks and queensland roads. maybe ill think about it. i could alwasy get those new shocks that make the ride comfortable and low. not sure what their called.

[FTE217]

No worries to help, sounds to me your shocks are shagged by your ride description.
You'd be amazed once you get some decent ones on how your ride will improve.
Koni and Billys will give you best handling and at the same time good ride quality.