|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-10-2007, 07:00 PM
|
#1 | ||
|
Teh Baest
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
|
For the last week or so my AU has decided that sometimes when it starts up it wants to sit on around 200-400rpm and shake pretty bad, lol
Doesn't do it all the time, just every now and then. Today i went to start it up and it nearly didn't start at all (took about 5 secs to fire up) and then it went with the whole shaking thing It is an auto and it kinda feels like it is stalling?? Ideas? All i have been doing to counteract this problem is starting the engine and revving her up to about 1200 for about 30 seconds, then she is fine She is getting her 140,000km service done on Wednesday so prolly shouldn't worry that much, just wondering what it may be? I'm thinking either Fuel Pump or injectors or sumn?? Seems to work fine at all other times tho, just not on start up.. Im pretty sure it's firing on all 6 cylinders.. I HOPE
__________________
1999 Liquid Silver AU Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!) Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler Coming..CMS Stg2A Cam, 68mm TB Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220 Currently: 151kW (165 on other dynos  )Last edited by ayeyew; 01-10-2007 at 07:05 PM. |
||
|
|
|
01-10-2007, 08:10 PM
|
#2 | ||
|
Teh Baest
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
|
Also, only things i have added to my car in the last month is a K&N Panel Filter and an XR6T Wide Mouth Snorkel
Don't think either of those would be responsible for this
__________________
1999 Liquid Silver AU Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!) Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler Coming..CMS Stg2A Cam, 68mm TB Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220 Currently: 151kW (165 on other dynos ) |
||
|
|
|
|
01-10-2007, 10:05 PM
|
#3 | ||
|
14.915 @ 151 KPH
Join Date: Apr 2007
Location: Sydney, NSW
Posts: 995
|
HI, could be a blocked fuel filter. try resetting computer
__________________
:evil3: 96 EF2 Futura I6 Auto :evil3: EL XR Front, 16 inch Tickford's, Superlow's Front/Rear with Monroe GT Sport's  : , XR6T Snorkle/Fram Filter, 4499's/Hi Flow Cat/2.5 inch Redback, 4.11's/LSD, 5% Tint, Sony Head Unit/ 6 1/2 Inch 190w Speaker's : 14.915 @ 151 kph 60' 2.254 : |
||
|
|
|
|
01-10-2007, 10:16 PM
|
#4 | ||
Join Date: Dec 2004
Posts: 9,292
|
Nulon carby and throttle body cleaner is your friend.
|
||
|
|
|
|
03-10-2007, 04:23 PM
|
#5 | ||
|
Teh Baest
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
|
Where exactly is the throttle body? I really don;t know too much about cars
I might buy some of this cleaner stuff and give it a go
__________________
1999 Liquid Silver AU Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!) Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler Coming..CMS Stg2A Cam, 68mm TB Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220 Currently: 151kW (165 on other dynos ) |
||
|
|
|
|
03-10-2007, 04:33 PM
|
#6 | ||
|
Join Date: Dec 2004
Posts: 9,292
|
follow the black plastic tubing that goes from the airbox to the engine, when the end of the plastic tube gets to a metal bit, that is the throttle body.
remove the black plastic tube from the throttle body and do as the can says. |
||
|
|
|
|
03-10-2007, 04:38 PM
|
#7 | ||
|
Teh Baest
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
|
Champion! I'll head down to repco and get some of that cleaner stuff
If that doesn't work, any other suggestions? Check my spark plugs?
__________________
1999 Liquid Silver AU Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!) Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler Coming..CMS Stg2A Cam, 68mm TB Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220 Currently: 151kW (165 on other dynos ) |
||
|
|
|
|
03-10-2007, 04:41 PM
|
#8 | ||
|
Join Date: Dec 2004
Posts: 9,292
|
give the Nulon a try first otherwise id look at fuel filter, leads and spark plugs if you havent done so already.
oh, enjoy the smell of the throttle body cleaner too.....no really, its awesome! |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Sluggish on start up
Linear Mode
