Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 12-08-2009, 07:07 PM   #1
toobs
Team DOB
 
toobs's Avatar
 
Join Date: Jul 2006
Location: Port Augusta
Posts: 10
Default About to replace engine in mk2 escort 1600- tips?

Hi everyone. I have a stock mk2 1600 which started making really bad noises down near the crank. Although I haven't diagnosed the issue properly, I'd hazard a guess that I've managed to spin a bearing or something similar.

I'll be removing the engine shortly and replacing it with a low-km or reco'd unit from either city dismantlers (Adelaide) or somewhere that can offer a better price with something resembling a warranty.

I've done countless work on lasers and other FWD cars but haven't touched an escort before. I have no issues pulling/rebuilding engines but just wondering if there are any things I need to look out for specifically with the escort.
Additionally, what parts/seals I should consider replacing while the engine is out.

Unfortunately its not my car and I have to keep the budget to a minimum. The car is not a cruiser, racer, etc only a dead standard car so it doesn't require any hot bits.

Thanks in advance for the help

Darius

__________________
Understeer is when you hit the tree with the front of the car, Oversteer is when you hit the tree with the back of the car
toobs is offline   Reply With Quote Multi-Quote with this Post
Old 13-08-2009, 07:52 AM   #2
Puzzlescort
Rally Nut
 
Puzzlescort's Avatar
 
Join Date: Feb 2009
Location: Melbourne
Posts: 297
Default

the 1600 is fairly small - easy change over

just check the obvious gaskets leaks, on the front of the gearbox, exhaust manifold, check the condition of the clutch fork & bearing while the motor is out, they can tend to bend

you can check the condition of the steering rack bushes etc while you at it (depending on how keen your getting)

apart from that there isnt much in an escort engine bay - lol
Puzzlescort is offline   Reply With Quote Multi-Quote with this Post
Old 14-08-2009, 11:06 AM   #3
toobs
Team DOB
 
toobs's Avatar
 
Join Date: Jul 2006
Location: Port Augusta
Posts: 10
Default

Haha very true! Easiest to remove gearbox with the engine or leave it in?
__________________
Understeer is when you hit the tree with the front of the car, Oversteer is when you hit the tree with the back of the car
toobs is offline   Reply With Quote Multi-Quote with this Post
Old 14-08-2009, 12:37 PM   #4
Puzzlescort
Rally Nut
 
Puzzlescort's Avatar
 
Join Date: Feb 2009
Location: Melbourne
Posts: 297
Default

I always find it easier to remove the engine without the gearbox if you are lifting the motor out, I usually only leave the gearbox on if I am dropping the whole lot down on the crossmemeber
for the 10 or so bolts, unless you want to do something with the gearbox leave it in - no stuffing around with tailshafts, speedo cables, etc
Puzzlescort is offline   Reply With Quote Multi-Quote with this Post
Old 14-08-2009, 04:48 PM   #5
toobs
Team DOB
 
toobs's Avatar
 
Join Date: Jul 2006
Location: Port Augusta
Posts: 10
Default

Thanks mate...are there any online store that stock escort gear for a decent price? I live in the country and getting parts is difficult/expensive, local parts shop thought EBC greenstuff was a type of coolant...
__________________
Understeer is when you hit the tree with the front of the car, Oversteer is when you hit the tree with the back of the car
toobs is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 07:04 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL