|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
22-09-2012, 10:21 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2005
Posts: 1,229
|
Any one mount a high mount stop light to an Au utility?
I am reading the wiring schematics and it appears to have a connector for "after market stop lamp" C703. I am after the location of connector C703 which would make it easier than splicing the loom. cheers Bill.
__________________
AUII XR6 VCT ute 20 years and still going strong! |
||
|
|
|
23-09-2012, 12:08 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2007
Location: Brighton, Adelaide
Posts: 3,972
|
page 20 shows connectors C701 and C702 if that helps,
http://fordforums.com.au/wsm/wire/aubx/Part%2024-5.html
__________________
Money Talks, but all i ever hear is it saying Goodbye!! |
||
|
|
|
|
23-09-2012, 08:37 AM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2005
Posts: 1,229
|
Ah ha! I overlooked that drawing.
Thank you very much. cheers Bill
__________________
AUII XR6 VCT ute 20 years and still going strong! |
||
|
|
|
|
23-09-2012, 02:40 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2005
Posts: 1,229
|
FYI
I found the connector and tested it with the high mount stoplight, all good. My preference is to attach with female connector and route the cable into the cabin to have the light mounted at the top of the rear glass just under the interior lamp. The light is a Narva LED brake light P/no. 84650BL and is ADR compliant. It is a universal design, $39 at Repco. The photos were taken from under the rear driver's side wheel well. Bill.
__________________
AUII XR6 VCT ute 20 years and still going strong! Last edited by Bill M; 07-08-2013 at 07:51 PM. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
High mount stop light LED Ute
Linear Mode
