|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
22-03-2014, 05:17 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2009
Posts: 51
|
Guys I have Mk1 escort 2 ltr pinto with muld works. Works consit of 20 thou over pistons stainless over size exaust and inlet valves with double springs powered by a Wade cam. The motor is fed by twin 45 DCOE weber carbs. The power at this stage is un known but am hoping for around 150hp when I finally get it to the Dyno ( un reg at this point )
Took it for a blast around the block ( Not the first toime ) and the clutch slips when fast cornering on power. I cant remember but I'm sure its the original clutch that came with the car. Sooooo I am in the market for a new clutch. I will only be doing street driving but want something that can handle some after hours activity. Theres solid plates 4 puk and 6 puck ones with springs and ones with out |
||
|
|
|
22-03-2014, 05:21 PM
|
#2 | ||
|
Regular Member
Join Date: Jun 2009
Posts: 51
|
Continued............
Any ideas |
||
|
|
|
|
28-03-2014, 12:54 PM
|
#3 | ||
|
Rally Nut
Join Date: Feb 2009
Location: Melbourne
Posts: 297
|
if you are using it on the street you will need a clutch plate with springs.....
|
||
|
|
|
|
28-03-2014, 01:16 PM
|
#4 | ||
|
Regular Member
Join Date: Dec 2008
Posts: 497
|
Does the car have an lsd, , locked diff or if open centre may just be spinning the inside wheel if it only does it cornering.
Sent from my GT-I9300 using Tapatalk
__________________
Bronze Wine XY GS Fairmont Resto |
||
|
|
|
|
15-06-2014, 01:13 PM
|
#5 | ||
|
Regular Member
Join Date: Sep 2009
Posts: 95
|
Brother just got a cush button one made for his car, its firm but streetable. Its between a heavy duty and a brass button.
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Mk! Escort heavy duty clutch 2 ltr pinto
Linear Mode
