What should i do next to my AU?!?!?!

[ayeyew]

Currently all i have done engine wise is fitting an XR6T Intake Snorkel and getting a K&N Panel filter

My baby goes in for it's 4480's, 2.5" Catback & Hi Flow Cat in just under 2 weeks ( Gotta love school hols : )

I'll be getting it tuned not too long after that

But in the meantime is there anything else i can do?

I like buying stuff off ebay :

Any suggestions that are worthwhile?

[falzoony]

do you have some pics of your car? or a link to it on aufalcon.com?

[ayeyew]

http://utsedu.facebook.com/album.php...4&id=552043031

I'm pretty sure that album can be viewed publicly

[eXi7w0unD]

imho 20's, ts50kit, clear side indercators, rear altezzas. etc

[LPGUTE]

where are you getting your exhaust done?

[ST]

Series 2/3 tail lights absolutely (or altezzas if that's what you are into). Colour coded door moulds and mirror covers.

What have you done to the interior?

[eXi7w0unD]

redcliff dyno could do the lot with that zorst setup for 900. prolly less

[dishpig]

You could get the C2R grill and fairmont headlights so you don't have the ugly coloudy things. I reckon that'd look alright.

[Casper]

Originally Posted by ayeyew

Currently all i have done engine wise is fitting an XR6T Intake Snorkel and getting a K&N Panel filter

My baby goes in for it's 4480's, 2.5" Catback & Hi Flow Cat in just under 2 weeks ( Gotta love school hols : )

I'll be getting it tuned not too long after that

But in the meantime is there anything else i can do?

I like buying stuff off ebay :

Any suggestions that are worthwhile?

So that means you are getting an edit or unichip or similar?

[hello]

Originally Posted by LPGUTE

where are you getting your exhaust done?

Castle Hill Exhaust

Originally Posted by RTSW

Absolutely nothing

Couldn't tell the difference between my interior and a taxi's interior

My mates have gotten me some lights for my bday apparently, :

Originally Posted by Casper

So that means you are getting an edit or unichip or similar?

I was thinking about an edit at autotech, what do u suggest?



BTW, this is the account i use at work, cuz i forgot my password :

[stiddy]

Castle Hill Exhaust LOL.. hmmm I know the guys there.. one is a down right ********, they are more holden orientated there. They do O.K work but you need to have a deep pocket. Wait for the - "oh we needed to do this, and this and this.. oh dont forget that" so now that $900 turns into $1500.
They have done it to me and one of my friends.

As for what next, depends if you want looks of performance.

Looks - rims, tinted windows, lowering, bodykit etc etc..

Performance - Diff gears, highstall and shift kit (unless its a manual), and definately without a doubt, edit. Even a cam change?

[FTE217]

Just get Autotech to do the lot,they have a inhouse exhaust guy and natually tuning is done at the same place.

[hello]

Autotech wanted $1950 or something ridiculous for a 2.5" catback, stainless steel cat & pacies, then another $1300 or so for an edit

So i was like...

No

[hello]

Originally Posted by stiddy

Castle Hill Exhaust LOL.. hmmm I know the guys there.. one is a down right ********, they are more holden orientated there. They do O.K work but you need to have a deep pocket. Wait for the - "oh we needed to do this, and this and this.. oh dont forget that" so now that $900 turns into $1500.
They have done it to me and one of my friends.

As for what next, depends if you want looks of performance.

Looks - rims, tinted windows, lowering, bodykit etc etc..

Performance - Diff gears, highstall and shift kit (unless its a manual), and definately without a doubt, edit. Even a cam change?

Damn.. that's the first bad comment i have heard about them, lol.. Not exactly a confidecne booster!!

Already got 18" Azzurros, already is lowered and got a bodykit.. Tints might be a go too

What does a shift kit do? Sounds interesting

[blu falc]

firms up the gear changes, I have one for sale, PM me if you want it

[Cam]

looks: clear side indicators and tint

performance: dont get the edit yet, get a cam first then the edit, then highstall

[hello]

Where is a good place to get a cam from?

[The Monty]

JMM, surecam, crow.
Although there is no Billet till february, so that limits your choices a bit. You will probably need a regrind, unless you wait.

[poolkeeper]

Originally Posted by Bluedriver

Just get Autotech to do the lot,they have a inhouse exhaust guy and natually tuning is done at the same place.

I wouldnt go autotech 4 the exhaust.

[LPGUTE]

Originally Posted by hello

Castle Hill Exhaust

ya i got a quote at castle hills exhaust and it the cheapest place so far but the thing is that it is far from ayeyew and me. so how did u know that ayeyew got his exhuast from there?

[The Monty]

That is ayeyew, is his work comp though as he cant remember his P/W.

[ayeyew]

Are there any places in sydney who offer packages similar to JMM?

Me rikey teh DEV3HL

[InfernoSR]

I dont know where you guys get all your money from... I've just spend around $700 in parts to make it roadworthy and service stuff... I struggled to pay that... :

[stiddy]

JMM cam? seriously.. give me a knob of salami, i'll grind you my own cam LOL.. stick with Surecam or Crow cam.
What ever you do in performance mods, do the edit last. No point getting it done now, then putting in a cam 2 months down the track and then having to get a re tune.

[ThoR_]

get series 2 or 3 tailight...the orange is just an eye saw

[hello]

Originally Posted by BLUEPRINT

I dont know where you guys get all your money from... I've just spend around $700 in parts to make it roadworthy and service stuff... I struggled to pay that... :

I still live with my parents



Getting married in less than a year, looking to move out in a couple months with the fiancee, so i gotta do stuff to my car now!! BEFORE IT IS TOO LATE