|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
30-01-2008, 01:14 PM | #1 | ||
2016 PX2 Ranger XLT
Join Date: Aug 2006
Location: Perth
Posts: 334
|
The car in question is a 99 KN 1.8L Laser sedan, the car very rarely gets driven since we live so close to the train and we use the ute most weekends. however this has caused a problem, now when you press down on the clutch and subsiquently release the clutch there is a squeaking sound, quite loud out side.
Does anybody have any idea what this may be? My first impression was possibly the pedal box but now Im leaning toward the throwout not having enough lubrication, if this is it is there any access to spray some sort of lubrication in there and what would people reccomend? Last edited by gregg_13; 30-01-2008 at 01:14 PM. Reason: title |
||
30-01-2008, 06:02 PM | #2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
some kind or molly grease in a spray can if you can spray it into the clutch plate
it may be rust in the surfaces where the relaese bearing and pressure plate run but if it is the grease in the sealed relase bearing has hardened and a good highway run wont melt the grease then that bearing may need to be replaced
__________________
My car goes Brumm Brumm |
||
30-01-2008, 06:07 PM | #3 | ||
2016 PX2 Ranger XLT
Join Date: Aug 2006
Location: Perth
Posts: 334
|
Cheers for that, had a quick look and listen this afternoon, and since the sound is when the pedal is pressed and not while driving I'm thinking and hoping its more toward the pedal, gonna check the rubber boots and seals and get some grease on there.
|
||
30-01-2008, 11:14 PM | #4 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
wd 40 or grease the spring
__________________
My car goes Brumm Brumm |
||
31-01-2008, 09:12 AM | #5 | ||
2016 PX2 Ranger XLT
Join Date: Aug 2006
Location: Perth
Posts: 334
|
Yeah got in there last night with some soft seal, it was the rubber boot where the arm goes into the bell housing, amazing how loud it was outside the car for such a minor thing.
|
||
Thread Tools | |
Display Modes | |
|