Upgrade options for AUII

[Ride]

Hi Matt,

Just looking at options for an AUII Fairmont Ghia, currently has standard brakes and have 18" T3 TS50 rims coming soon, how big would I be able to go that will fit under those rims (I was thinking Brembo 6 pot front + 4 pot rear plus discs to suit) and willing to spend a decent amount since they'll be for street + track use without going too over the top.

If you could throw up a few different options and prices that would be great, at most I'd be looking $4k or there abouts.



Ta,
Andrew.

[FLOORED]

Originally Posted by Ride

Hi Matt,

Just looking at options for an AUII Fairmont Ghia, currently has standard brakes and have 18" T3 TS50 rims coming soon, how big would I be able to go that will fit under those rims (I was thinking Brembo 6 pot front + 4 pot rear plus discs to suit) and willing to spend a decent amount since they'll be for street + track use without going too over the top.

If you could throw up a few different options and prices that would be great, at most I'd be looking $4k or there abouts.



Ta,
Andrew.

Mate you have the right thinking cap on with this and i think those rims accept the kit you are inquiring on because the T series car came out with the brembo kit from memory.AP Racing kits are available from under $6000 but the rotor sizes are smaller but i think the calipers are more stronger.I can do a 6P355mm and 4P330 rear Brembo kit as mentioned with braided lines for about $6000 at the moment if your interested.If these are what you are after and if you require fitting then let me know and i will get some accurate pricing for you.
Sorry just noticed the 4K limit and what i would suggest is we go 4 piston on the front and run a BF XR8 turbo vented rear brakes which can be supplied for that amount.This kit will be similar to what the Typhoons run.

[Ride]

Thanks for the reply Matt, its the next upgrade on the list after I receive the rims since that's the next purchase I have and where my cash is going, but I'll definitely shoot you an email once I've saved up after the rims and work something out.

If I had sourced a set of Brembos separately would you be able to do the fitting + lines and any brackets required (from my understanding BA/BF Brembos from the GT-P would fit but need a different bracket for the calipers) ?

[FLOORED]

Originally Posted by Ride

Thanks for the reply Matt, its the next upgrade on the list after I receive the rims since that's the next purchase I have and where my cash is going, but I'll definitely shoot you an email once I've saved up after the rims and work something out.

If I had sourced a set of Brembos separately would you be able to do the fitting + lines and any brackets required (from my understanding BA/BF Brembos from the GT-P would fit but need a different bracket for the calipers) ?

Yes we could do that no problems but of course i would also like to sell them to you as well so email me before you make your purchase to see what we can do at the time.Thanks