|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-08-2010, 06:27 PM
|
#1 | ||
|
adrian
Join Date: Aug 2005
Location: Christchurch, New Zealand
Posts: 495
|
After trying unsuccessfully to tune my S3 XR8 with an SCT box, I am looking at other options. I have found a crowd that does VCM tuning, mainly holdens, but they have tuned some pretty good B series turbos and 8s too.
Question is, can the AUs be tuned with the VCM software too, we plugged into it today and there was no communication, but that could be the same issue as with the SCT. BUT am i barking up the wrong tree with the VCM stuff? The tuner said he wasn't sure about AUs, probably not, but i thought i have read on here that a few people has done it. Comments welcome
__________________
T3 TS50 #17 275kW AU3 XR8 SVP 220kW |
||
|
|
|
16-08-2010, 07:16 PM
|
#2 | ||
|
Just slidin'
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
|
Id just try a different tuner, I havent heard of a car not being able to be tuned with the Xcal3.
The only problems there could be, would be if an erronr code flashes up, meaning its not been wiped properly, ECU failure, locked to another car etc.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure |
||
|
|
|
|
16-08-2010, 09:10 PM
|
#3 | ||
|
adrian
Join Date: Aug 2005
Location: Christchurch, New Zealand
Posts: 495
|
no other tuners in Christchurch and there were no errors, only communication failure came up. Ford have no problem scanning it. it is also the 3rd ECU after two previous were stuffed by an xcal 2. 3 different xcal 3 tried, same result.
__________________
T3 TS50 #17 275kW AU3 XR8 SVP 220kW |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
AU tuning
Linear Mode
