|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
13-10-2011, 08:15 PM
|
#1 | ||
|
Starter Motor
Join Date: Apr 2011
Posts: 14
|
Howdy, just found this website http://www.steelpanels.co.uk/index.html
Looks like a godsend for capri (and other) body repairs. Does anyone have any experience with these body repair panels? Would they be as simple as cut old section out, cut new section to fit, weld panel in? Or is it not that simple? Also, how good and accurate are they? Are there any alternatives out there? I am no metalworker so I can't fabricate panel sections myself that would look any good. Would it be wiser to just go to a pro? |
||
|
|
|
13-10-2011, 08:35 PM
|
#2 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
This crowd have been around for year and years....like 20+ years (in my boook bought in 1990....).
No experience unfortunately. Last time I priced a few years ago, the GBP to OZ$ was horrendous. However, post-GFC might be more viable. There are other suppliers in OZ , depending on what you want and may work out cheaper after freight for bulky items like panels. |
||
|
|
|
|
16-10-2011, 01:52 PM
|
#3 | |||
|
Regular Member
Join Date: Jan 2011
Posts: 72
|
Quote:
Just received a shipment from Ex-Pressed for my Anglia. The stuff looks top notch. I haven't started fitting yet but I would have to say they are very good. There is currently a 3-4 month lead time on panels because they are so busy which I guess speaks for itself! I got a lot of stuff $1340 worth (786GBP). Freight was $400 and then duties and GST when coming through customs was $270. Not cheap by any means but I got some stuff made locally for a floor section that was $200, if you can't fabricate panels yourself you will pay more to get stuff made locally than from ex-pressed. I have an Anglia build thread on the Classic Ford Forum if you wanrt to have a look at what I have bought. Steve. |
|||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Ex-pressed steel panels - anyone used them.
Linear Mode
