|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-09-2012, 10:38 PM
|
#1 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
I changed my series 2 au diff for a diff I brought now in told the diff I put in didn't have the tone wheels for the abs sensor ect. I'm advised an axle
Change will fix this by putting them on is this hard to do and doable at home anybody done a write up? Cheers |
||
|
|
|
12-09-2012, 12:19 AM
|
#2 | ||
|
Cocoloko
Join Date: Jul 2008
Location: Perth
Posts: 539
|
assuming its live axle? no very easy to change axles, dismantle the brake set up on each side, undo 4 bolts holding the bearing plate in place, adn slide the axles out, sounds easy, but depends how often you swing spanners i guess.... if you installed the diff your self it shouldnt be a problem.
__________________
94 ED XR8 Sprint: SVO alloy heads, FMS F303 cam, AU EECV ECU, T5, on going build. 2010 Territory: family bus. 79 P7 LTD 351. |
||
|
|
|
|
12-09-2012, 11:45 AM
|
#3 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
Yup live axle sounds sweet I'll try it myself no bearings needs to be replaced or anything? And I'm assuming the diff oil will need to be drained
|
||
|
|
|
|
15-09-2012, 05:37 PM
|
#4 | ||
|
Cocoloko
Join Date: Jul 2008
Location: Perth
Posts: 539
|
can re-use the bearing they will be fine just re-use the same cup thats in the diff housing you pull your axles from
__________________
94 ED XR8 Sprint: SVO alloy heads, FMS F303 cam, AU EECV ECU, T5, on going build. 2010 Territory: family bus. 79 P7 LTD 351. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Diff change now no traction control or abs
Linear Mode
