![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
[AUT-747]
Join Date: May 2010
Posts: 595
|
Hey guys,
Pushing through my barra conversion and there's one last issue I can't work out. The water temp is hooked up for the AU ecu, it's getting to the ecu as I can pull the temperature from the OBD2 feed however it is not operating on my cluster. Are there any reasons as to why this will not operate on the dash as I understand the ecu generates this signal? I also cannot work out why my aircon isn't working, it is all hooked up still as per factory. Would it make a difference if the ECU is getting an RPM signal or not (currently is not). Cheers, Alex. |
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|