|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
01-09-2007, 03:14 PM | #1 | ||
Starter Motor
Join Date: Sep 2006
Posts: 2
|
my 85 laser which has been going really well to date has developed a problem in the last week. A couple of times when I have stopped at lights it has cut out-all thered lights come on but the car has stopped- no problems restarting. BUT this week I got in one afternoon and I couldn't start her up- made all the right noises but wouldn't turn over completely. The nRMA guy came and checked spark etc and then she started- drove the rest of the day no problems. The next day started fine, drove up the driveway and then she cut out and I couldn't get her started.
any ideas as to minor things I could try not being a very mechanical person- it has been a while between services and she was to go in this week for a full service and tuneup and rego check. |
||
03-09-2007, 10:57 AM | #2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
plugs or leads if you have spark
clean the battery posts and terminals with a bit of sand paper book the car in for a service .... just a guess might be a dirty fuel filter
__________________
My car goes Brumm Brumm |
||
09-09-2007, 07:47 PM | #3 | ||
Injected
Join Date: Apr 2007
Location: Melbourne
Posts: 67
|
If it is a full service u will more than likley find that the problem will go away after the service as these sort of problems are usualy caused by a lapse of time between routine maintenance.
|
||
Thread Tools | |
Display Modes | |
|