|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-05-2007, 06:58 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
hi all i'm putting an XR6 non VCT ECU into my SR ( I already have the 3.45 diff) and have some questions
1. do you just leave the power econemy switch wires open circuit for the adaptive shift to work? 2. when you replace the ECU and go through the learning stage ( i know it takes up to an hour ) to get the ECU & BEM to talk to each other will the BEM remember all the keys or will have to pay ford to re program the other key? 3 is it true if I add an R6 cam (HO engine ) that is all that is required to get it up to HO engine standards? 4 does anyone have a HO camshaft they don't want for a reasonable cost 4 i know this doesn't really belong here but i have a set of alteza headlights (silver)for sale used but in reasonable condition with no leaks i replaced mine for black ones make an offer |
||
|
|
|
01-05-2007, 10:18 PM
|
#2 | ||
|
Moderator
  
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
 
|
I think GlennBA (used to AUII) found out the fuel reg is different .. and this needed changing as well ... can't help you with the rest though unfortunately.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
|
|
|
|
01-05-2007, 10:25 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
ok thats a good start thanks
|
||
|
|
|
|
01-05-2007, 10:29 PM
|
#4 | ||
|
Moderator
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
|
Not sure if the fuel rail is different either .. it might be altogether in one though with the regulator ... AFAIK the injectors are the same though
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
|
|
|
|
01-05-2007, 10:31 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 1,463
|
I notice you have an SR falcon, you need to make sure both PCMs are smartshield, then you need someone to do a parameter reset to get it to run.
|
||
|
|
|
|
01-05-2007, 11:07 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
the ECU I intend to fit is smartshield and from the workshop manual all i have to do is with all accessories off leave the ignition on till the smartsheild light stops flashing which can take up to 61 minutes the locks will cycle twice switch off for 30 seconds till the the smartsheild light flashes then it should have re learnt but i'm unsure if after this process if all my keys will work or will ford have to program my other keys?
|
||
|
|
|
|
02-05-2007, 07:25 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 1,463
|
What publication states that you can replace a smartshield PCM using this method? Are you able to scan it and email to me?
|
||
|
|
|
|
02-05-2007, 07:32 PM
|
#8 | ||
|
The Ancient Warrior
Join Date: Jan 2005
Location: The Qld Border Ranges
Posts: 346
|
"does anyone have a HO camshaft they don't want for a reasonable cost "
Try here if you use ebay; http://cgi.ebay.com.au/TICKFORD-CAM-...QQcmdZViewItem |
||
|
|
|
|
02-05-2007, 07:47 PM
|
#9 | |||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
Quote:
|
|||
|
|
|
|
02-05-2007, 09:11 PM
|
#10 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 1,463
|
I wasn't thinking it was smartlock because you don't need to do anything when replacing a smartlock enabled PCM, it's just that nothing is mentioned of this by Ford in any training notes and workshop manual.
|
||
|
|
|
|
02-05-2007, 09:52 PM
|
#11 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
this is the page i mentioned
Last edited by FGII-XR6; 02-05-2007 at 09:58 PM. |
||
|
|
|
XR6 ECU in a standard AU
Linear Mode
