Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > OzECruisers (E/N/D Series) > OzECruisers General Discussions

OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS

Reply
 
Thread Tools Display Modes
Old 16-05-2007, 12:03 AM   #1
TUF.EB
Banned
 
TUF.EB's Avatar
 
Join Date: Mar 2007
Location: Melbourne
Posts: 543
Default Car doesnt sit straight?

Hi

Ive noticed in my EB, and in a few of the other E-Series Ive owned, they dont sit straight, they sit on a slant, passenger side lower then the drivers.

Ive got new shocks in the back, just some Monroe Gas, with standard shocks in the front, and King spring superlows all around, with 1.5 coils cut off the back..

Now from the front and back the car is sitting on a slant, passenger side sloping down.

Anyone else have this issue?

Anyone else know why it would sit like that?

Didnt used to bother me that much, but now its really ****ing me off! Its the whole left side of the car, not just the front or back..

Thanks

TUF.EB is offline   Reply With Quote
Old 16-05-2007, 12:07 AM   #2
bentles
Banned
 
bentles's Avatar
 
Join Date: Nov 2006
Location: warrandyte south
Posts: 1,408
Default

petrol tank

oh also front?

umm maybe theres just more stuff on that side, try getting the car on a set of 4 point "Scales" i dunno how easy it would be to find some, but something like a weigh bridge which can measure how much kg is over each wheel. im sure its not "bent" or somehting its just heavier on the left side.
bentles is offline   Reply With Quote
Old 16-05-2007, 12:18 AM   #3
TUF.EB
Banned
 
TUF.EB's Avatar
 
Join Date: Mar 2007
Location: Melbourne
Posts: 543
Default

Quote:
Originally Posted by bentles
petrol tank

oh also front?

umm maybe theres just more stuff on that side, try getting the car on a set of 4 point "Scales" i dunno how easy it would be to find some, but something like a weigh bridge which can measure how much kg is over each wheel. im sure its not "bent" or somehting its just heavier on the left side.

Yeah I always thought petrol tank as well, but it sits even on each side, just to a slant, if you get what I mean.

I just got the car on LPG today, so the back sits even lower now, but still to one side.

I reckon if the chassis was bent though it wouldnt sit so evenly to one side. Noticed it in a few other E-Series as well..
TUF.EB is offline   Reply With Quote
Old 16-05-2007, 12:51 AM   #4
[Tonko]
What's green is gold
 
[Tonko]'s Avatar
 
Join Date: Feb 2006
Location: Shepparton
Posts: 3,079
Default

Hmm, i noticed the same with my EB, not sure what the Go is, even with no one in it, flat road, etc...
__________________

EF XR8 - Koni's - Cam and Headwork -3.9s - Ex VIC TMU -


1982 Nissan Patrol - 460 ci Big Block soon - Semi Gloss Black - Dark Tint - 4x 6" Infinity Kappa Perfect Splits - 5" Kappa 2 ways - Kappa 6x9's - 2x12" Kappa perfect subs - 2x4 Channel and 2x Mono Kappa amps-


[Tonko] is offline   Reply With Quote
Old 16-05-2007, 12:56 AM   #5
lukey
www.lukehimself.net
 
lukey's Avatar
 
Join Date: Feb 2005
Location: Melbourne, Victoria
Posts: 1,333
Default

Same here, passenger side is way lower then drivers.
__________________
Subaru Liberty MY04 4GEN Luxury
www.lukehimself.net
lukey is offline   Reply With Quote
Old 16-05-2007, 01:11 AM   #6
TUF.EB
Banned
 
TUF.EB's Avatar
 
Join Date: Mar 2007
Location: Melbourne
Posts: 543
Default

Quote:
Hmm, i noticed the same with my EB, not sure what the Go is, even with no one in it, flat road, etc...
Yeah exactly..


Quote:
Same here, passenger side is way lower then drivers.
How freaking annoying is it? ****ing me off bad, Im going to try and get it to sit even.. Il get the grinder out this weekend.
TUF.EB is offline   Reply With Quote
Old 16-05-2007, 01:17 AM   #7
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Default

Drivers side is built to be approx 10mm higher at the front than the left, so that when driver only is in the car, the car sits flat. True rumour!!! Seriously, I was told that a few years ago when I had my EF lowered.

After lowering, my EL sits around 5mm higher at the front right compared to front left. Rear is within about 3mm of each other.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote
Old 16-05-2007, 02:15 AM   #8
[Tonko]
What's green is gold
 
[Tonko]'s Avatar
 
Join Date: Feb 2006
Location: Shepparton
Posts: 3,079
Default

Well there ya go, you learn something everyday! even at 2am!
Maybe its just a gangsta lean?
__________________

EF XR8 - Koni's - Cam and Headwork -3.9s - Ex VIC TMU -


1982 Nissan Patrol - 460 ci Big Block soon - Semi Gloss Black - Dark Tint - 4x 6" Infinity Kappa Perfect Splits - 5" Kappa 2 ways - Kappa 6x9's - 2x12" Kappa perfect subs - 2x4 Channel and 2x Mono Kappa amps-


[Tonko] is offline   Reply With Quote
Old 16-05-2007, 07:39 AM   #9
webby_191189
low wagooon
 
Join Date: Jan 2007
Location: Swan Hill
Posts: 1,579
Default

Lol well there you go. I noticed that on my wagon to after i lowered it. I measured it and it was a 5mm difference all around.
__________________
Webby
S2 AU XR6 UTE

webby_191189 is offline   Reply With Quote
Old 16-05-2007, 08:35 AM   #10
mcflux
Banned
Donating Member1
 
mcflux's Avatar
 
Join Date: Dec 2004
Posts: 8,303
Default

Solution: park on uneven ground :P
mcflux is offline   Reply With Quote
Old 16-05-2007, 09:26 AM   #11
alecrain
'03 BA XT
 
alecrain's Avatar
 
Join Date: May 2006
Location: Berwick, VIC
Posts: 526
Default I think know why

The car needs to "sit" evenly only when it's moving. It will not move without the driver.
So when the driver is inside the car should be sitting straight-
what do you think?
alecrain is offline   Reply With Quote
Old 16-05-2007, 09:52 AM   #12
daz82
In the family since 1996
 
daz82's Avatar
 
Join Date: Jan 2005
Location: Essendon
Posts: 261
Default

I must be a real fatty cuz my ea and ef both are a bit lower on the drivers side, hahaha
daz82 is offline   Reply With Quote
Old 16-05-2007, 12:51 PM   #13
SVT8
FF.Com.Au Hardcore
 
SVT8's Avatar
 
Join Date: Mar 2006
Location: Melb, Vic
Posts: 1,088
Default

lol, thats weird though...... is it possible to get shocks that can increase the left hand side by 10mm so the car can sit level?........how did ford actually make the car sit 10mm higher on the left? if it was the springs then getting superlow all rounds should even it out, unless the shocks are different lenghts aswell..... i havnt noticed this on my car though, as the springs and shocks have been replaced with aftermarket ones.
SVT8 is offline   Reply With Quote
Old 16-05-2007, 12:59 PM   #14
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Default

Quote:
Originally Posted by SVT8
lol, thats weird though...... is it possible to get shocks that can increase the left hand side by 10mm so the car can sit level?........how did ford actually make the car sit 10mm higher on the left? if it was the springs then getting superlow all rounds should even it out, unless the shocks are different lenghts aswell..... i havnt noticed this on my car though, as the springs and shocks have been replaced with aftermarket ones.
I'd say it's the spring seat. This is only what I was told by a suspension place - never had it verified by Ford though.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote
Old 16-05-2007, 12:59 PM   #15
RavenLS1
FF.Com.Au Hardcore
 
Join Date: Jul 2005
Posts: 1,419
Default

my old EB wagon had the same shonky slant to passanger side.
__________________
405rwhp LS1, FG XR6T Ute manual, VE series 2 Omega LPG.
RavenLS1 is offline   Reply With Quote
Old 16-05-2007, 01:31 PM   #16
pHaT`eL
Banned
 
pHaT`eL's Avatar
 
Join Date: Nov 2005
Location: Carrum Downs
Posts: 947
Default

It would probably have something to do with a more balanced ride. When your in it it would help keep the car more stable I spose.
Mines like it as well.
While were on the topic of odd things. Has anyone noticed the rear wheels not centred? My right hand side I can fit 2 fingers between the wheel and guard, and the left only one, or maybe the other way around.
pHaT`eL is offline   Reply With Quote
Old 16-05-2007, 01:33 PM   #17
frd_crzer
:D:D
 
frd_crzer's Avatar
 
Join Date: Jul 2006
Location: Werribee
Posts: 913
Default

on all cars they sit on the left cos when you hop into the driver seat it evens it out that is y it sits on the left.
__________________
Cheers Grant
frd_crzer is offline   Reply With Quote
Old 16-05-2007, 01:44 PM   #18
mcflux
Banned
Donating Member1
 
mcflux's Avatar
 
Join Date: Dec 2004
Posts: 8,303
Default

So how about the offset fuel tank then?
mcflux is offline   Reply With Quote
Old 16-05-2007, 03:33 PM   #19
Sundeep
Banned
 
Sundeep's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Eastern Subs.
Posts: 2,281
Default

Quote:
Maybe its just a gangsta lean?
Sickk broooo.... Ford designers at the design table "I think we will need to engineer in some sort of ghettos Stance" "Hmmm yes, yes.... maybe a Gangsta lean?" "Oh jolly Idea chap"...

Sundeep
Sundeep is offline   Reply With Quote
Old 16-05-2007, 04:21 PM   #20
mcflux
Banned
Donating Member1
 
mcflux's Avatar
 
Join Date: Dec 2004
Posts: 8,303
Default

Or Abu chopped his springs unevenly :P
mcflux is offline   Reply With Quote
Old 16-05-2007, 08:33 PM   #21
NudgE^SIKBRO
Never late with a V8
 
NudgE^SIKBRO's Avatar
 
Join Date: Jan 2005
Location: Carrum Downs, Vic
Posts: 2,903
Default

my old EA was like that i noticed it after i lowered it... if your running pedders springs go out and check the stickers on the springs... mine had LH and RH on them and i had them in the wrong sides... sat better once id swapped them around so they were in the correct sides
__________________
My Rides

(Daily)2004 Explorer V8 Limited
(Work) 2014 Kenworth K200 Aerodyne
(Classic) 1969 Mini K, 1340, twin SU's
The beginning is near!!!

Body by Ford. Soul by NudgE
NudgE^SIKBRO is offline   Reply With Quote
Old 16-05-2007, 09:01 PM   #22
walker
FF.Com.Au Hardcore
 
walker's Avatar
 
Join Date: Jun 2005
Location: in a house
Posts: 789
Default

Quote:
Originally Posted by JC
Drivers side is built to be approx 10mm higher at the front than the left, so that when driver only is in the car, the car sits flat. True rumour!!! Seriously, I was told that a few years ago when I had my EF lowered.

After lowering, my EL sits around 5mm higher at the front right compared to front left. Rear is within about 3mm of each other.
I was also told that once as-well, King Springs are also marked on them left and right.......Well the set I put in did neway
__________________
Its not peer presure..........Its just your turn!

XE project underway
walker is offline   Reply With Quote
Old 16-05-2007, 09:06 PM   #23
Nostalgia
LOW AND SLOW
 
Nostalgia's Avatar
 
Join Date: Sep 2006
Location: Geelong.
Posts: 2,644
Default

Petrol tank LOL. Cmon guys, seriously. His back springs have obviously been cut un-even. I can explain more but i dont think the term G-Spec is allowed on here.

Last edited by EAadam; 16-05-2007 at 09:12 PM.
Nostalgia is offline   Reply With Quote
Old 16-05-2007, 09:11 PM   #24
needfordspeed
FF.Com.Au Hardcore
Donating Member1
 
Join Date: Jan 2005
Location: Melbourne
Posts: 2,224
Default

Quote:
Originally Posted by EAadam
Petrol tank LOL. Cmon guys, seriously. His back springs have obviously been cut un-even.
There is no chance of that at all, I cut exactly 1.5 coils off and they were measured correctly.
__________________
1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Cooler|Sports ryder shocks|Pedders lows|Resprayed|Microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Turbo grind cam|Crow double valve springs|1.3mm MLS headgasket|C4 Conversion|Built bottom end|Custom plenum|10.6@125MPH
needfordspeed is offline   Reply With Quote
Old 16-05-2007, 09:15 PM   #25
Nostalgia
LOW AND SLOW
 
Nostalgia's Avatar
 
Join Date: Sep 2006
Location: Geelong.
Posts: 2,644
Default

Quote:
Originally Posted by needfordspeed
There is no chance of that at all, I cut exactly 1.5 coils off and they were measured correctly.
I also measured mine correctly and it ended up lopsided. Maybe they not seated correctly ?
Nostalgia is offline   Reply With Quote
Old 16-05-2007, 10:04 PM   #26
TUF.EB
Banned
 
TUF.EB's Avatar
 
Join Date: Mar 2007
Location: Melbourne
Posts: 543
Default

Quote:
Originally Posted by Ghia5L
Solution: park on uneven ground :P
Hahaha..
Quote:
Originally Posted by Ghia5L
Or Abu chopped his springs unevenly :P
The nerve of you Dave, how dare you question my spring chopping skills! I've chopped many springs in my day, and all to precise perfection :
Quote:
Originally Posted by EAadam
Petrol tank LOL. Cmon guys, seriously. His back springs have obviously been cut un-even. I can explain more but i dont think the term G-Spec is allowed on here.
Quote:
I also measured mine correctly and it ended up lopsided. Maybe they not seated correctly ?
They are seated correctly, and we only cut the back.. so then the whole left side wouldnt sit to a slant if only the backs where cut un-evenly?
TUF.EB is offline   Reply With Quote
Old 16-05-2007, 10:21 PM   #27
Parfrey
FF.Com.Au Hardcore
 
Parfrey's Avatar
 
Join Date: Apr 2006
Location: Melbourne
Posts: 900
Default

my xh ute did the same thing: left hand side was lower..
maybe its cause theres more potholes/ bumps on the left of the road and we turn right around roundabouts more than left?? lol maybe not.
Parfrey is offline   Reply With Quote
Reply


Forum Jump


All times are GMT +11. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL