Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 20-02-2008, 09:24 AM   #1
sscovill
Starter Motor
 
Join Date: Feb 2008
Posts: 2
Question 1991 KF Laser Jumping While Accelerating

Hi All,

I own a 91 KF Laser 1.6 Carby Manual.

On my way into work this morning about 15 minutes after starting off the car started to jump when accelerating. It seems most pronounced at 1/6-1/2 throttle. If I floor it it seems OK but a bit sluggish.

Also when I revved the car in neutral at part throttle it would almost stall before revving.

This made taking off quite jerky.

Anyone have any ideas on what it could be?

It doesn't happen all the time either. Maybe once every 3-4 weeks.

Cheers
Sam

sscovill is offline   Reply With Quote Multi-Quote with this Post
Old 21-02-2008, 12:46 AM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

second stage of the carby not working
choke problem
a vaccume leak
vaccume pot devices not operating on the carby
water/dirt in fuel filter
sticky accelerator if a cable

or a spark problem
coil cap plugs leads dissy module
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 21-02-2008, 11:02 AM   #3
sscovill
Starter Motor
 
Join Date: Feb 2008
Posts: 2
Default

Thanks for the reply.

I might take a look at the carby on the weekend. Anything to look out for when I do?

Cheers
Sam
sscovill is offline   Reply With Quote Multi-Quote with this Post
Old 22-02-2008, 04:35 AM   #4
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

just spray wd 40 around the carby pivot points

start the car without the air filter on and see if the top butterfly opens

see if you have a clean air filter
clean the battery terminals

pop out in the dark lift the hood and start the motor
look for arcing at the coil cap or sparkling leads
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:21 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL