Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 12-06-2009, 02:50 PM   #1
aufairmontghia
XR6
 
aufairmontghia's Avatar
 
Join Date: Dec 2008
Location: Victoria
Posts: 114
Default Au Fairmont Ghia Handling Like A Boat!!!!

Hi All,

My AU FAIRMONT GHIA drives & handles like a boat!!! It's got the tickford setup & 17's but seems to float on the road especially cruising on the highway..... It doesn't have a rear sway either & don't know if a S1 should have it???

I've been told this is typical & normal for all AU's to handle like that!!!! WOTDA....

Is this true???

Anyone else have this problem & have you been able to fix it????

Cheers

aufairmontghia is offline   Reply With Quote Multi-Quote with this Post
Old 12-06-2009, 03:02 PM   #2
blueoval
Critical Thinker
 
blueoval's Avatar
 
Join Date: Jan 2005
Location: Adelaide
Posts: 20,368
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Well thought out and constructive posts.  A real credit to this forum. 
Default

Sounds like shocks could be worn out.

My advice is to go to your nearest Pedders and get a 28point safety check. It cost $14. They will give you a written report of your entire suspension setup and let you know if anything is worn and also give you a price on fixing it.

BUT

DONT, I repeat, DONT get them to do work on your car unless you have money burning a hole in your pocket.

I would recommend speaking to one of the site sponsors here on this forums with regarsd to the findings of the report and seeing what they can do pricewise and fitting also.
__________________
"the greatest trick the devil pulled, is convincing the world he doesn't exist"

2022 Mazda CX5 GTSP Turbo

2018 Hyundai Santa Fe Highlander


1967 XR FALCON 500


Cars previously owned:
2021 Subaru Outback Sport
2018 Subaru XV-S
2012 Subaru Forester X
2007 Subaru Liberty GT
2001 AU2 75th Anniversary Futura
2001 Subaru GX wagon
1991 EB XR8
1977 XC Fairmont
1990 EA S Pak
1984 XE S Pak
1982 ZJ Fairlane
1983 XE Fairmont
1989 EA Falcon
1984 Datsun Bluebird Wagon
1975 Honda Civic
blueoval is offline   Reply With Quote Multi-Quote with this Post
Old 12-06-2009, 03:28 PM   #3
ronwest
All Bran = Regular Member
 
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by aufairmontghia
My AU FAIRMONT GHIA drives & handles like a boat!!!
My S3 Ghia was like that when I bought it.

Mine had the stock ghia suspension and 16"s on it but I note that yours has the Tickford + 17"s.

I swapped mine to 17"s and XR coils and shocks but found the ride too hard.

I've then swapped to F and R lows "touring" coils and shocks which I bought from a member in here - from memory they are a Pedders brand. Much, much better ride.

I then swapped to 18"s but didn't like the ride so swapped back to 17"s.

My driving is all long trips. Car sits in the garage week in and week out and then 4 or 5 times per year we'll go for a 4000k drive.

That "touring" combination works very well for us (old farts) but I'm over driving on the bleeding edge and now look for that compromise between reasonable handling and ride.

Given that you've got reasonable suspension to start with, I'd be looking at shockies for starters but the suggestion to get the safety check is a very good one.
ronwest is offline   Reply With Quote Multi-Quote with this Post
Old 12-06-2009, 11:26 PM   #4
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

could also be an alignment issue. and my series 1 forte has a rear sway bar and live axle, although i thought ghia's had irs. as above get a pedder's check and also get an alignment done somewhere decent too. incorrect camber and toe settings can majorly upset the car
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 15-06-2009, 12:46 PM   #5
brad`
The Monty
 
brad`'s Avatar
 
Join Date: Oct 2007
Location: Geelong
Posts: 1,226
Default

series 1 and series 2 IRS was optional and only became standard towards the end of series 2 and all series 3 models came out with it
__________________

brad` is offline   Reply With Quote Multi-Quote with this Post
Old 15-06-2009, 01:00 PM   #6
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

You buy a barge and expect it not to handle like a boat?

Seriously I'd get the shocks and bushes looked at. Sounds like you have an IRS equipped model so I dare say that the upper shock mounts are knackered and in need of replacement, when they're stuffed they do give the rear a very loose feel.
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 15-06-2009, 08:57 PM   #7
grandpa_spec_F6
AFF Whore
 
grandpa_spec_F6's Avatar
 
Join Date: Apr 2009
Location: In between gas stations
Posts: 2,246
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

I 2nd the barge analogy, although quick cornering on stock S1 ghia suspension results in an even quicker 180 degree turn :(
grandpa_spec_F6 is offline   Reply With Quote Multi-Quote with this Post
Old 15-06-2009, 10:27 PM   #8
SSVPom
Formally FairmontPom
 
Join Date: Mar 2006
Location: Melbourne
Posts: 1,124
Default

Quote:
Originally Posted by brad`
series 1 and series 2 IRS was optional and only became standard towards the end of series 2 and all series 3 models came out with it
(I think IRS was standard on Series 1,2 and 3 Ghias.... 100% on all Series 2 onwards anyway.)

Sounds like the wheel alignment and/or rear shock mounts need checking as a first port of call !
__________________
1998 XH Falcon V8 S Pack, white, couple of dents. Bogan project
2024 Everest Platinum
SSVPom is offline   Reply With Quote Multi-Quote with this Post
Old 16-06-2009, 11:16 AM   #9
THR347
Regular Member
 
THR347's Avatar
 
Join Date: Dec 2008
Posts: 96
Default

Quote:
Originally Posted by aufairmontghia
Hi All,

It's got the tickford setup & 17's but seems to float on the road especially cruising on the highway..... It doesn't have a rear sway either & don't know if a S1 should have it???


Cheers
I've got an s1 XR6 with IRS and it has front and rear swaybars.
__________________
http://aufalcon.com/THR347
THR347 is offline   Reply With Quote Multi-Quote with this Post
Old 16-06-2009, 12:29 PM   #10
aufairmontghia
XR6
 
aufairmontghia's Avatar
 
Join Date: Dec 2008
Location: Victoria
Posts: 114
Default

Forgot to mention... The shocks were changed all round & has had 4 wheel algniment with a camber/caster adjustment kit up front!!!
Another set of rear top shock mounts (not new) were fiited up... My mounts & the ones fiited looked in good nick & didn't seem to have the rubber perishing or any wearing!!!

The sway/float/roll???? seems to be from the back... not a huge amount but enough to make u feel usteady on the road!!!
I'm not being petty but it doesn't give you much confidence....
aufairmontghia is offline   Reply With Quote Multi-Quote with this Post
Old 16-06-2009, 12:34 PM   #11
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

Did you add the washers under the cup when you fitted the new shock mounts?
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 16-06-2009, 02:00 PM   #12
au11futura
ROCKING THE EL FUTURA
 
au11futura's Avatar
 
Join Date: Nov 2008
Location: HOW DARE YOU
Posts: 2,221
Default

Quote:
Originally Posted by RG
You buy a barge and expect it not to handle like a boat?

Seriously I'd get the shocks and bushes looked at. Sounds like you have an IRS equipped model so I dare say that the upper shock mounts are knackered and in need of replacement, when they're stuffed they do give the rear a very loose feel.
all ford sedans have been known to handle like the tittanic.

the barge theory is true.

but with a little attention and the right setup your ford can handle quite well, but dont expect it to hanle like a jappo.

dont forget they are made for open roads and cumfort in minde.
au11futura is offline   Reply With Quote Multi-Quote with this Post
Old 16-06-2009, 08:02 PM   #13
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

if it's coming from the rear i'd second shock mounts, but it still doesn't mean the alignment was done properly just because it has been done.... if it's out of specs it will cause problems
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 17-06-2009, 04:24 PM   #14
Jimmyd
Banned
 
Join Date: Apr 2007
Posts: 734
Default

Quote:
Originally Posted by bodes-sh
if it's coming from the rear i'd second shock mounts, but it still doesn't mean the alignment was done properly just because it has been done.... if it's out of specs it will cause problems

AU1 Fairmont Ghias had IRS standard - with the Tickford 17"s and Sports Suspension they handle well enough to scare the crap out of some euro sporties costing astronomically more $$$$.

Two likely causes for your problem -

1. incorrect fitting of the rear upper shock mounts - if you don't fit the parts in the correct sequence the shock rod does not clamp down properly on the mount, also some aftermarket shocks have the incorrect length between shoulder and end of threaded section on the piston rod - may sometimes need an extra spacer to ensure it clamps down properly

2. Has the wheel aligner used the correct settings - with the Tickford suspension & 17"s you MUST use the XR6 settings otherwise it'll handle like a pig(relatively speaking).....

These are specific issues I have come across that match your symptoms but may not reflect your reality.....

Cheers

Last edited by Jimmyd; 17-06-2009 at 04:30 PM.
Jimmyd is offline   Reply With Quote Multi-Quote with this Post
Old 17-06-2009, 08:37 PM   #15
buickman
buickman
 
buickman's Avatar
 
Join Date: Dec 2004
Location: eastern suburbs Melb Vic
Posts: 1,462
Default

The AU 1 ghia IRS suspensions did not come with the rear camber kit I know mine didn't I think only the XR's did. I found when I fitted 17"s on the car it felt rough and bouncy especially with a full tank of fuel.
I fitted super lows and pedders sports struts and a rear camber kit which made the car so much better in the handling dept but gave a harder ride.
buickman is offline   Reply With Quote Multi-Quote with this Post
Old 17-06-2009, 10:35 PM   #16
ronwest
All Bran = Regular Member
 
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by buickman
The AU 1 ghia IRS suspensions did not come with the rear camber kit
Neither did the Series 3.

I fitted the kit (2 eccentric headed bolts) prior to wheel alignment after suspension work was done.
ronwest is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2009, 07:02 AM   #17
Jimmyd
Banned
 
Join Date: Apr 2007
Posts: 734
Default

Quote:
Originally Posted by buickman
The AU 1 ghia IRS suspensions did not come with the rear camber kit I know mine didn't I think only the XR's did. I found when I fitted 17"s on the car it felt rough and bouncy especially with a full tank of fuel.
I fitted super lows and pedders sports struts and a rear camber kit which made the car so much better in the handling dept but gave a harder ride.
I was a Ford Service Manager when the AU was launched - IIRC the factory fitted Tickford 17" wheel/sports suspension option on the Fairmont Ghia basically received the Tickford XR6 VCT suspension - including the rear camber adjustment, as noted without this you can not get the car to ride/handle correctly with the change to ride height, damping/spring rates and 45 profile tyres employed with the Tickford 17" wheel/sports suspension option.

Maybe some ex Tickford/production line assembly man will be able to recall that it was only fitted to blue ones on fridays or some such story that is usually trotted out on these occasions; this is just recollections of what I saw fitted to Fairmont Ghias with the Tickford 17" wheel/sports suspension option as they rolled off the truck and onto the predelivery inspection hoist.....

Cheers

James
Jimmyd is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:33 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL