Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 31-01-2010, 03:06 PM   #31
Fordman1
Donating Member
Donating Member3
 
Fordman1's Avatar
 
Join Date: Jan 2005
Posts: 5,828
Default

Quote:
Originally Posted by phillyc
That is right. Total output was 55,000 in 2009 AFAIK. Approximate split was 31,000 Falcons. 14,000 Utes & 10,000 Territory.

I think a target of 60-65,000 is achievable in 2010. My projection would be 35,000 Falcons, 12,000 Utes & 15,000 Territory.
My tip is 58,000 and no more than 60,000
Fordman1 is online now   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 03:11 PM   #32
jpd80
FF.Com.Au Hardcore
 
jpd80's Avatar
 
Join Date: Jan 2010
Posts: 11,357
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Thoughtful contributions to our community 
Default

Quote:
Originally Posted by phillyc
That is right. Total output was 55,000 in 2009 AFAIK. Approximate split was 31,000 Falcons. 14,000 Utes & 10,000 Territory.

I think a target of 60-65,000 is achievable in 2010. My projection would be 35,000 Falcons, 12,000 Utes & 15,000 Territory.
I think that sounds like a fair assumption and the introduction of Ecoboost I-4 in 2011
could spell a nice lift in buyers seeking something other than a mid sized fridge....


I got this off the Ford media site, pity FoA is lumped into all of Asia, would be nice to see actual figures...

Quote:
Asia Pacific Africa: For the fourth quarter, Ford Asia Pacific Africa reported a pre-tax operating profit
of $19 million, compared with a loss of $208 million a year ago.

The improvement reflects primarily favorable net pricing, China joint venture profits and structural cost
reductions. Fourth quarter revenue was $1.6 billion, up from $1.4 billion a year ago.
Link.....
Since FoA's $274 million loss in 2008 resulted in a $208 million loss for FAPSA then,
Asia without FoA made a profit of $62 million.

I'm wondering whether FoA made another big loss in 2009 that was canceled out
by Asia increasing revenue by a further $200 million over 2008?

Last edited by jpd80; 31-01-2010 at 03:21 PM.
jpd80 is online now   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 03:14 PM   #33
phillyc
FF.Com.Au Hardcore
 
phillyc's Avatar
 
Join Date: Mar 2005
Location: Newcastle
Posts: 3,246
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always factual and beneficial. 
Default

Quote:
Originally Posted by Ohio XB
The Fiesta hits the US market about April and the new Focus in August-September. I believe the Focus will be a game changer for Ford. It has front end styling that Americans do NOT expect from Ford, and it looks pretty trendy.


Steve
Yeah, I certainly think that Focus could be a game changer. Didn't realise it would be launched this year. Thought it was 12mths away. Happy to hear it is!

Wonder how Fiesta will go. Coming into the summer months with the usual rising 'gas' price should be a good time to launch. Seems to be some hype for it too.
__________________
BA2 XR8 Rapid M6 Ute - Lid - Tint -18s
226.8rwkW@178kmh/537Nm@140kmh 1/9/2013
14.2@163kmh 23/10/2013

Boss349 built. Not yet run. Waiting on a shell.

Retrotech thread
http://www.fordforums.com.au/showthr...1363569&page=6
phillyc is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 03:24 PM   #34
jpd80
FF.Com.Au Hardcore
 
jpd80's Avatar
 
Join Date: Jan 2010
Posts: 11,357
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Thoughtful contributions to our community 
Default

Quote:
Originally Posted by Ohio XB
The Fiesta hits the US market about April and the new Focus in August-September. I believe the Focus will be a game changer for Ford. It has front end styling that Americans do NOT expect from Ford, and it looks pretty trendy.


Steve
Steve, Focus is a 2012 model, not 2011 so I doubt you will see it this year.
That was all the commotion at Detroit, that people would have to wait a year for the new Focus.
jpd80 is online now   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 03:27 PM   #35
4Vman
FF.Com.Au Hardcore
 
4Vman's Avatar
 
Join Date: Jan 2005
Posts: 14,654
Default

Quote:
Originally Posted by phillyc
That is right. Total output was 55,000 in 2009 AFAIK. Approximate split was 31,000 Falcons. 14,000 Utes & 10,000 Territory.

I think a target of 60-65,000 is achievable in 2010. My projection would be 35,000 Falcons, 12,000 Utes & 15,000 Territory.
To increase output by an extra 10000 units will take considerable thinking and planning to avoid costly overtime cost burdons and potential quality issues.... it isnt as simple as turning the line up or working more hours....



__________________
335 S/C GT: The new KING of Australian made performance cars..
4Vman is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 03:43 PM   #36
Fordman1
Donating Member
Donating Member3
 
Fordman1's Avatar
 
Join Date: Jan 2005
Posts: 5,828
Default

Quote:
Originally Posted by 4Vman
To increase output by an extra 10000 units will take considerable thinking and planning to avoid costly overtime cost burdons and potential quality issues.... it isnt as simple as turning the line up or working more hours....
Thats about 15 %... won't happen...

Small steps, small steps....
Fordman1 is online now   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 03:56 PM   #37
4Vman
FF.Com.Au Hardcore
 
4Vman's Avatar
 
Join Date: Jan 2005
Posts: 14,654
Default

Quote:
Originally Posted by Barraxr8
Thats about 15 %... won't happen...

Small steps, small steps....
Exactly... a 15% increase in output would be very difficult to mange in such a short period of time...
Long term steady sustainable growth is better than "boom bust"...



__________________
335 S/C GT: The new KING of Australian made performance cars..
4Vman is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 04:59 PM   #38
jpd80
FF.Com.Au Hardcore
 
jpd80's Avatar
 
Join Date: Jan 2010
Posts: 11,357
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Thoughtful contributions to our community 
Default

I heard that Ford was looking at increasing line speed, that might give a cushion for immediate delivery,
Ford would be tickled pink having to work Saturdays to keep up with demand...
Maybe overtime for now is the best solution to cover guaranteed sales...
jpd80 is online now   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 05:04 PM   #39
4Vman
FF.Com.Au Hardcore
 
4Vman's Avatar
 
Join Date: Jan 2005
Posts: 14,654
Default

Quote:
Originally Posted by jpd80
I heard that Ford was looking at increasing line speed, that might give a cushion for immediate delivery,
Ford would be tickled pink having to work Saturdays to keep up with demand...
Maybe overtime for now is the best solution to cover guaranteed sales...
As long as its a short term interum measureas part of sustainable growth and allows them to quickly move to standard production rates....
Overtime costs can quickly erode any profit the extra sales bring.....



__________________
335 S/C GT: The new KING of Australian made performance cars..
4Vman is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 05:12 PM   #40
phillyc
FF.Com.Au Hardcore
 
phillyc's Avatar
 
Join Date: Mar 2005
Location: Newcastle
Posts: 3,246
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always factual and beneficial. 
Default

Forgive me for being an optimist! I never assumed it would be easy to increase the line rate. I've discussed this with a few on here before.

Burela has talked about raising the line rate sometime early this year. Dependent on the economic conditions, possible affect of the pull-forward by the 50% tax etc.

Last year had some down days earlier in the year. Prior to April 2009 IIRC. (When GMH were discounting Commodores to $28990 driveaway). Can someone confirm number of days?! Add in a couple of days that were lost, then maybe 1500 additional units could be made on that basis.

So to reach 60,000 would only require an additional 3,000 units. What does that work out to be? 12 overtime shifts. All that presuming no increase in line rate.

I do believe it is feasible on the factory front. Suppliers? Not so sure. But most i'm sure would welcome the extra output.

The big question is, if that extra output can be profitably absorbed. Particularly, as the 2010 forecast is to be 940,000 which is just 1-2% more than last year.

I'm sure Burela is working on that equation!
__________________
BA2 XR8 Rapid M6 Ute - Lid - Tint -18s
226.8rwkW@178kmh/537Nm@140kmh 1/9/2013
14.2@163kmh 23/10/2013

Boss349 built. Not yet run. Waiting on a shell.

Retrotech thread
http://www.fordforums.com.au/showthr...1363569&page=6
phillyc is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 05:15 PM   #41
Fordman1
Donating Member
Donating Member3
 
Fordman1's Avatar
 
Join Date: Jan 2005
Posts: 5,828
Default

Quote:
Originally Posted by jpd80
I heard that Ford was looking at increasing line speed, that might give a cushion for immediate delivery,
Ford would be tickled pink having to work Saturdays to keep up with demand...
Maybe overtime for now is the best solution to cover guaranteed sales...
1. The assembly plant doesn't have any scheduled (overtime) atm,

2, There won't be a line speed increase this year.

IF the demand is there it'll be done on weekends.... with OT.

I think there is still a concern about the incentives being finished (business buyers - tax wise), so FoA will be conservative with production schedules to avoid excess inventory..
Fordman1 is online now   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 05:19 PM   #42
phillyc
FF.Com.Au Hardcore
 
phillyc's Avatar
 
Join Date: Mar 2005
Location: Newcastle
Posts: 3,246
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always factual and beneficial. 
Default

Quote:
Originally Posted by jpd80
I heard that Ford was looking at increasing line speed, that might give a cushion for immediate delivery,
Ford would be tickled pink having to work Saturdays to keep up with demand...
Maybe overtime for now is the best solution to cover guaranteed sales...
Yes, this is what i heard. You posted as i was typing.
__________________
BA2 XR8 Rapid M6 Ute - Lid - Tint -18s
226.8rwkW@178kmh/537Nm@140kmh 1/9/2013
14.2@163kmh 23/10/2013

Boss349 built. Not yet run. Waiting on a shell.

Retrotech thread
http://www.fordforums.com.au/showthr...1363569&page=6
phillyc is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 05:23 PM   #43
phillyc
FF.Com.Au Hardcore
 
phillyc's Avatar
 
Join Date: Mar 2005
Location: Newcastle
Posts: 3,246
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always factual and beneficial. 
Default

Quote:
Originally Posted by Barraxr8
1. The assembly plant doesn't have any scheduled (overtime) atm,

2, There won't be a line speed increase this year.

IF the demand is there it'll be done on weekends.... with OT.

I think there is still a concern about the incentives being finished (business buyers - tax wise), so FoA will be conservative with production schedules to avoid excess inventory..
Thanks Barraxr8! What happened to the talk of line rate increases? Is it just Burela being conservative? Figured the incentive hangover might be playing on his mind.
__________________
BA2 XR8 Rapid M6 Ute - Lid - Tint -18s
226.8rwkW@178kmh/537Nm@140kmh 1/9/2013
14.2@163kmh 23/10/2013

Boss349 built. Not yet run. Waiting on a shell.

Retrotech thread
http://www.fordforums.com.au/showthr...1363569&page=6
phillyc is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 05:31 PM   #44
Fordman1
Donating Member
Donating Member3
 
Fordman1's Avatar
 
Join Date: Jan 2005
Posts: 5,828
Default

Quote:
Originally Posted by phillyc
Thanks Barraxr8! What happened to the talk of line rate increases? Is it just Burela being conservative? Figured the incentive hangover might be playing on his mind.

Phil if Marin said that, he's hedging his bets and playing the media game. 'Line speed' may just mean building more cars on average, rather than 're jigging' the assembly plant.

Line speed increases (ie: rebalances ) are very expensive, and after you've done them you're locked in. If you need to reduce again, you either:

Have downdays or lay people off.

There are plenty of Saturdays in the year if extra production is required. If they can build an extra 10 or so cars a day with Mid week OT and some smart practices, they'll try that too.

If the production team at the assembly plant can improve their First time through, the daily rate may improve also.
Fordman1 is online now   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 09:21 PM   #45
phillyc
FF.Com.Au Hardcore
 
phillyc's Avatar
 
Join Date: Mar 2005
Location: Newcastle
Posts: 3,246
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always factual and beneficial. 
Default

Quote:
Originally Posted by Barraxr8
Phil if Marin said that, he's hedging his bets and playing the media game. 'Line speed' may just mean building more cars on average, rather than 're jigging' the assembly plant.

Line speed increases (ie: rebalances ) are very expensive, and after you've done them you're locked in. If you need to reduce again, you either:

Have downdays or lay people off.

There are plenty of Saturdays in the year if extra production is required. If they can build an extra 10 or so cars a day with Mid week OT and some smart practices, they'll try that too.

If the production team at the assembly plant can improve their First time through, the daily rate may improve also.
This is what I was getting at with increasing production by say 3,000 this year, would only be what 12 days of overtime? The lack of down days this year (hopefully!) would add another 1,500 vehicles. Suddenly, production is now 60,000pa.

I believe there will be some substitution between Coyote & I6T, but overall incremental / conquest sales gains. I think it may even have been you last year talking about the demand for I6T being huge = working long hours which in turn delaying some sales. Burela was saying regularly how many months in advance G6ET was sold out for too. Although if FPV are to assemble the V8, then i'm not sure how many they could build.

Just my thoughts. Putting them out there.

Again, the main thing is to do build and sell profitably.
__________________
BA2 XR8 Rapid M6 Ute - Lid - Tint -18s
226.8rwkW@178kmh/537Nm@140kmh 1/9/2013
14.2@163kmh 23/10/2013

Boss349 built. Not yet run. Waiting on a shell.

Retrotech thread
http://www.fordforums.com.au/showthr...1363569&page=6
phillyc is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 09:48 PM   #46
Falc'man
You dig, we stick!
 
Falc'man's Avatar
 
Join Date: Mar 2006
Posts: 7,461
Default

Good news. Expected.

A lot of the dollars, lets not forget, were spent bringing out all-new cars at a time when very few were spending - and GM/Chrysler waiting for the doll cheque, stopping R&D on just about everything.

In effect these "losses" Ford had were in fact expenditures necessary that have put Ford in a superior position having superior products, when, as it turns out, the competition is still picking up the pieces.

Like I said, it was expected.
__________________
"....You don't put the car through engineering" - Rod Barrett.
Falc'man is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2010, 10:50 PM   #47
jpd80
FF.Com.Au Hardcore
 
jpd80's Avatar
 
Join Date: Jan 2010
Posts: 11,357
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Thoughtful contributions to our community 
Default

Maybe I misread the Marin Burela quote from before Christmas where he said,
“We don’t have enough Territorys out there, we can’t meet demand.”

Barraxr8, your take on using Saturdays makes perfect sense for flexibility
without increasing line speed, if more expensive vehicles are built on those days
then perhaps the overtime costs are more than controlled, maybe even justified.

Having spent the last year right sizing production to demand, I doubt FoA would want
to change anything from current plans, they seem to be in the "sweet spot" at the moment,
barely managing to meet demand - what a wonderful thing to be able to tell head office...
jpd80 is online now   Reply With Quote Multi-Quote with this Post
Old 01-02-2010, 03:46 AM   #48
Ohio XB
Compulsive Hobbiest
 
Ohio XB's Avatar
 
Join Date: May 2006
Location: Ohio, USA
Posts: 1,032
Default

Barraxr8 is right. Line speed increase is a long term solution, overtime is an interim solution.

When line speed is increased (US) you have to hire more people, pay more benefits, and other costs associated with employees. However, now that American Ford workers will hire in at 1/2 the previous wage and reduced benefits that should not be a problem........right? That's what our government wanted, that's what the people wanted......no more "overpaid trained monkeys," so hiring more employees should not be a problem here.

At our plant where we build the Econoline we are on a four 10 hour day work week, Monday through Thursday. Starting the 3rd week of February we are getting 6 Fridays added to our production schedule and more expected, including possible Saturdays as well.



Quote:
Steve, Focus is a 2012 model, not 2011 so I doubt you will see it this year.
That was all the commotion at Detroit, that people would have to wait a year for the new Focus.
Thanks for the correction. Here is where I went astray...

From Ford media website:
Quote:
Sleek, stylish and sporty, both the four-door sedan and five-door hatchback body styles of the next-generation Focus are previewed prior to their production start for Europe and North America late in 2010 and market launch early in 2011.
Our model year starts in September-ish, therefore the 2011 would start at that time, and with production scheduled to start "late in 2010" I automatically assumed the regular model launch schedule to be the same. Models introduced in Spring (April-ish) have previously been designated like "2011 1/2" but lately Ford has pushed the point of "accelerated model introduction", so I would imagine as you said, it will be a 2012.


Steve
__________________
My Filmmaking Career Website
Latest Project: Musclin'

My XB Interceptor project

Wife's 1966 Mustang

My Artworks and Creative Projects Site
Oil Paintings, Airbrushing, Metal Sculpture,
Custom Cars, Replica Movie Props, Videos,
and more!
Ohio XB is offline   Reply With Quote Multi-Quote with this Post
Old 01-02-2010, 06:10 PM   #49
Bossxr8
Peter Car
 
Bossxr8's Avatar
 
Join Date: Dec 2004
Location: geelong
Posts: 23,145
Default

Quote:
Originally Posted by phillyc
This is what I was getting at with increasing production by say 3,000 this year, would only be what 12 days of overtime? The lack of down days this year (hopefully!) would add another 1,500 vehicles. Suddenly, production is now 60,000pa.

I believe there will be some substitution between Coyote & I6T, but overall incremental / conquest sales gains. I think it may even have been you last year talking about the demand for I6T being huge = working long hours which in turn delaying some sales. Burela was saying regularly how many months in advance G6ET was sold out for too. Although if FPV are to assemble the V8, then i'm not sure how many they could build.

Just my thoughts. Putting them out there.

Again, the main thing is to do build and sell profitably.
I'd imagine if they drop the wagon mid year those 400 odd sales would be taken up by extra Falcon, ute and Territory, which would probably cancel out any need to increase rate.

And if LI LPG is introduced in October, that means either Ford will stockpile E Gas cars before July or have no LPG available between July and October. That will screw things up a bit.
Bossxr8 is offline   Reply With Quote Multi-Quote with this Post
Old 01-02-2010, 06:29 PM   #50
phillyc
FF.Com.Au Hardcore
 
phillyc's Avatar
 
Join Date: Mar 2005
Location: Newcastle
Posts: 3,246
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always factual and beneficial. 
Default

Quote:
Originally Posted by Bossxr8
I'd imagine if they drop the wagon mid year those 400 odd sales would be taken up by extra Falcon, ute and Territory, which would probably cancel out any need to increase rate.

And if LI LPG is introduced in October, that means either Ford will stockpile E Gas cars before July or have no LPG available between July and October. That will screw things up a bit.
Plenty of questions!
How many LPG cars do Ford sell on a monthly basis?
How many of those are the wagon?
What are the chances of the wagon being dropped?

Dropping the wagon (if they do) would at least allow the reduction in line complexity. Perhaps also increasing the 'first time through'?

Dropping the wagon also allows for more high mix cars too (as you mentioned).
__________________
BA2 XR8 Rapid M6 Ute - Lid - Tint -18s
226.8rwkW@178kmh/537Nm@140kmh 1/9/2013
14.2@163kmh 23/10/2013

Boss349 built. Not yet run. Waiting on a shell.

Retrotech thread
http://www.fordforums.com.au/showthr...1363569&page=6
phillyc is offline   Reply With Quote Multi-Quote with this Post
Old 01-02-2010, 06:35 PM   #51
phillyc
FF.Com.Au Hardcore
 
phillyc's Avatar
 
Join Date: Mar 2005
Location: Newcastle
Posts: 3,246
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always factual and beneficial. 
Default

Quote:
Originally Posted by Falc'man
Good news. Expected.

A lot of the dollars, lets not forget, were spent bringing out all-new cars at a time when very few were spending - and GM/Chrysler waiting for the doll cheque, stopping R&D on just about everything.

In effect these "losses" Ford had were in fact expenditures necessary that have put Ford in a superior position having superior products, when, as it turns out, the competition is still picking up the pieces.

Like I said, it was expected.
Definitely right there. Ford really stole a march on the opposition and this will be further highlighted in the upcoming years. What we are seeing now, is just a the beginning.

Making money in a terrible economy is a great thing. It really highlights the working together of the UAW & Ford management tied with Mullaly's vision for One Ford.

Making money will also mean that they can compete in more market segments.
__________________
BA2 XR8 Rapid M6 Ute - Lid - Tint -18s
226.8rwkW@178kmh/537Nm@140kmh 1/9/2013
14.2@163kmh 23/10/2013

Boss349 built. Not yet run. Waiting on a shell.

Retrotech thread
http://www.fordforums.com.au/showthr...1363569&page=6
phillyc is offline   Reply With Quote Multi-Quote with this Post
Old 01-02-2010, 07:00 PM   #52
Swordsman88
Getting it done.....
 
Swordsman88's Avatar
 
Join Date: Oct 2006
Location: Brisbane
Posts: 2,219
Default

Quote:
Originally Posted by phillyc
Definitely right there. Ford really stole a march on the opposition and this will be further highlighted in the upcoming years. What we are seeing now, is just a the beginning.

Making money in a terrible economy is a great thing. It really highlights the working together of the UAW & Ford management tied with Mullaly's vision for One Ford.

Making money will also mean that they can compete in more market segments.
You need to spend money to make money..... I know a few GM-H fans that have been quiety impressed with the new product Ford has/will be launching in the next year or so....esp the V8, Li LPG etc. They won't admit it per se....but they realise that GM is very much on the back foot RE product devlopment. Its a never ending cycle of improvement and once you get behind its is very very hard to catch up.

There has been some discussion in the coyote threads RE holden/GM meeting future emissions regs with the small block V8s etc. I dont' doubt they will be able to do it (hopefully keeping their power levels competitive) but its the medium to long term that is a problem. Talk is of 2012 before the 'new V8' from GM and ford will have 2-3 years of its very impressive V8 plus ecoboost V6 (and I6 here) on sale on the mean time. That wil hurt the perception of GM as having 'new tech' as much as the atcual deficit in performance, fuel efficency, nvh etc. Toyota has cultured a (often misleading) perception of being 'advanced' and 'firsts'. Now Ford is trying to do the same thing with EB, new V8, DSG transmissions, fuel burn improvements, HMI computer systems and the just the general launchign of new (more cost effective) global models.

While Ford is still in debt things are looking up...i don't see a way out for GM any where near as clearly or at least in the near future.....
__________________
Dynamic White 1995 EF XR6 Auto

Now with:
Pacemaker 4499s
Lukey Catback Exhaust
Chrome BA XR-style tip
Airdam Mounted CAI with modified (bellmouth) airbox
Trip Computer install
KYB shocks
Bridgestone Adrenalin tyres

Coming Soon:
Exhaust Overhaul.....
Swordsman88 is offline   Reply With Quote Multi-Quote with this Post
Old 01-02-2010, 07:57 PM   #53
jpd80
FF.Com.Au Hardcore
 
jpd80's Avatar
 
Join Date: Jan 2010
Posts: 11,357
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Thoughtful contributions to our community 
Default

One thing of concern to Holden fans would be if Rudd brings in tough CO2 limits for cars,
Holden are sitting ducks with that 6.0 V8.
jpd80 is online now   Reply With Quote Multi-Quote with this Post
Old 02-02-2010, 12:31 PM   #54
aussie muscle
FF.Com.Au Hardcore
 
aussie muscle's Avatar
 
Join Date: Feb 2008
Posts: 2,312
Default

Quote:
and $34.3 billion in Automotive debt
ouch. big business hurts my head to think of the amount of $$$ they burn through.
aussie muscle is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:51 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL