|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
13-04-2010, 09:55 PM
|
#1 | ||
|
Regular Member
Join Date: Mar 2010
Location: Victoria
Posts: 180
|
Hi, i have recently bought a 68 XT which i am restoring, it has a pretty worked 302 in it.
I am trying to work out what heads it has on it. I was told they were 4v. since the engine has been just rebuilt, I am reluctant to take the heads off to find the casting marks. on the top between the rockers it says 302 and on the other flat where it usually says 2v or 4v it just has the letter B. can anyone help me with identifying them or is there any other way to tell without removing the heads. Thanks, Adam |
||
|
|
13-04-2010, 10:28 PM
|
#2 | ||
|
Gunna girlie-man
Join Date: Nov 2005
Location: Bayswater North, victoria
Posts: 2,587
|
Could this thread be of any help to you?
http://www.fordforums.com.au/showthread.php?t=88005 Taken from another website---- "You can identify the 2V, 4V and M heads while the engine is still in the car. Cast into the head (raised) is either a "2", a "4" or an "M". These are located on the valve-side of the head (not the block side) near the intake (not the exhaust ports) in the upper left corner. This means that as you stand on the driver's side of the engine (US steering) and look at the head through the AC crapola, just above the valve cover on the left end of the head, you will see the marking. (This would be easier to explain if I had a picture. Perhaps I'll get one.)"
__________________
WADE CAMS-- UNLEASH THE POWER!! <INSERT WITTY SIGNATURE HERE> Daily- 05' BA futura... work done. Cruiser- 85' VK berlina... more work done  
Last edited by gthofan; 13-04-2010 at 10:36 PM. |
||
|
|
302 Windsor Head Identification
Linear Mode
