Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 24-04-2010, 05:13 PM   #1
leakey
FF.Com.Au Hardcore
 
leakey's Avatar
 
Join Date: Jun 2009
Location: Adelaide
Posts: 1,024
Default Removing Door panels 2008 FOCUS (lots a pics)

Hi All. I gave the guys in a recent 'speaker thread' the bum steer regarding how to remove door panels on a 2006 Focus. Well, mine's the update 2008 model, but this should be the same. So here is a HOW TO to make up for it.

This is quite comprehensive! Feel free to jump ahead.

Tools required -
Butter knife, set of TORX driver bits, small socket bits. (sorry dont know actual sizes) Small bit of stiff wire 200mm long. (I used the bit of flat wire you snap off a windscreen wiper blade) Flat blad screw driver.

1/. Pop out the blank panel/window switch in the door latch area. I used a butter knife. Set a side in a safe place.


2/. This allows you to grip the door latch cover. Pull it towards you. Pull the door latch towards you and then take off the cover. Set a side in a safe place.


3/. Pop off the door handle cover. I used a butter knife to start it. It is all clips. See how it looks when popped off. Set a side in a safe place.



4/. Unscrew the two small bolts. I used a small socket driver. Set a side in a safe place.


5/. FOR MANUAL WINDERS. Push the flat blade screw driver in between the window winder and the plastic washer behind it. Get bloody close to the door, and pull the window winder out towrds you so you can see behind it. You are looking for a silver grey clip. (see below) I made a small hook out of some flat metal. Push this behind the winder, and pull the clip towards you until it pops off. You can then remove the winder and the plastic washer assembly behind it. Set a side in a safe place.





6/. Starting at the door latch hole, gently pull the door cover towards you until it pops off. Continue doing this all the way around until its off. Done!


Notice how the speakers are rivetted in?!


I hope this helps a few of you out. If there are any major differences between fronts and rears, I'll do another HOW TO.

Cheers - Leakey

__________________
XG Falcon Ute, XE Fairmont Ghia & BA Mk II Falcon SR

Last edited by leakey; 24-04-2010 at 05:23 PM.
leakey is offline   Reply With Quote Multi-Quote with this Post
Old 24-04-2010, 06:25 PM   #2
Velociraptor82
Eat my Brake Dust
 
Velociraptor82's Avatar
 
Join Date: Apr 2008
Location: In the back with Miss Alba
Posts: 985
Default

Fantastic work putting all that together Leakey.
__________________
Small Ford Sunday 2009 - Best Modified Car presented by the EuroFord Club
Small Ford Sunday 2009 - Best Focus (Non-XR5) presented by the RS Owners Club of Victoria
Sydney All Ford Day 2009 - Best in Club presented by The Combined Ford Clubs of NSW
Small Ford Sunday 2010 - Best Modified Car presented by the EuroFord Club

If I'm going to Hell, I'm going in a Ford



Velociraptor82 is offline   Reply With Quote Multi-Quote with this Post
Old 24-04-2010, 09:44 PM   #3
leakey
FF.Com.Au Hardcore
 
leakey's Avatar
 
Join Date: Jun 2009
Location: Adelaide
Posts: 1,024
Default

My pleasure.
__________________
XG Falcon Ute, XE Fairmont Ghia & BA Mk II Falcon SR
leakey is offline   Reply With Quote Multi-Quote with this Post
Old 24-04-2010, 09:52 PM   #4
leakey
FF.Com.Au Hardcore
 
leakey's Avatar
 
Join Date: Jun 2009
Location: Adelaide
Posts: 1,024
Default

Just in case any of you are wondering, this is what the back of the door panel looks like -



__________________
XG Falcon Ute, XE Fairmont Ghia & BA Mk II Falcon SR
leakey is offline   Reply With Quote Multi-Quote with this Post
Old 25-04-2010, 09:27 PM   #5
pcdougie
Da_Focus
 
Join Date: Mar 2010
Posts: 14
Default

Excellent work. Many thanks for this. I can't believe they used rivets!!
pcdougie is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2010, 04:45 PM   #6
DZFord
FF.Com.Au Hardcore
 
DZFord's Avatar
 
Join Date: Jan 2009
Location: Victoria
Posts: 877
Technical Contributor: For members who share their technical expertise. - Issue reason: LS Focus PCV Valve & Hose replacement, a very detailed write up with photos. 
Default

Thanks for the really comprehensive guides leakey, they may come in handy one day.
DZFord is offline   Reply With Quote Multi-Quote with this Post
Old 28-04-2010, 09:20 PM   #7
20focus05
I wanna XR5
 
20focus05's Avatar
 
Join Date: Aug 2005
Location: South Oz
Posts: 749
Default

Top Stuff, good work
__________________
Great Wall X240. Bouncing around the APY Lands

Ex Ford owner and member of this great site for ages.

South Australia, where the RIGHT hand lane is the NEW LEFT lane??????!!! %&#@*
20focus05 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:38 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL