|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-01-2013, 11:20 PM
|
#1 | ||
|
Regular Member
Join Date: May 2009
Location: Wallaroo SA
Posts: 112
|
I just bought my daughter a 1990 laser. She took it for a drive the other night and said that when she indicated left the lights would flash to high beam. Any ideas before I start pulling things apart. Thanks
|
||
|
|
|
26-01-2013, 07:27 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2005
Location: Sausage Singlet NSW
Posts: 3,301
|
I have seen people flash the lights accidentally when putting on an indicator, sure she didn't do this as well ? You may have to try it for yourself first and see if it does do it and if so try cleaning all the wiring plugs to headlights and indicators, then check the relays, next guess will be there's a fault in the indicator / headlight stalk on the steering column (from memory that's where it's located)
|
||
|
|
|
|
27-01-2013, 08:06 PM
|
#3 | ||
|
Regular Member
Join Date: May 2009
Location: Wallaroo SA
Posts: 112
|
No worries. Will take it for a drive and check myself. If it is still doing it I will probably clean all connectors etc . Cheers
|
||
|
|
|
|
30-01-2013, 03:26 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
replace the combination switch with a known good one. Lasers and Telstars are known for this fault. In the AX Telstar there is a small module in the switch you can replace. It is held in with 2 screws. I am not sure if the Laser is the same. Possibly, as they come out of the same factory.
|
||
|
|
|
1990 Laser headlight and indicator problem
Linear Mode
